Load data for 7 x 72 R + .284 | 150gr | Nosler Ballistic Tip Hunting

7 x 72 R cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:150 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.831"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:11.0

Load data in caliber 7 x 72 R with .284 | 150gr | Nosler Ballistic Tip Hunting bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Somchem S365, Vihtavuori N150 and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 4064<<locked>>84%35,868 psi88%2382 fps99.7%
Alliant Reloder- TS 15.5<<locked>>84%35,230 psi87%2369 fps97.2%
Alliant Reloder-17<<locked>>88%34,693 psi85%2428 fps96.2%
Bofors RP3<<locked>>84%34,374 psi85%2365 fps97.1%
Hodgdon Hybrid 100V<<locked>>96%36,013 psi89%2402 fps96.7%
Hodgdon LEVERevolution<<locked>>82%35,911 psi88%2415 fps97.4%
Hodgdon TrailBossᴾ<<locked>>100%34,737 psi86%1585 fps100%
Hodgdon VARGET<<locked>>82%35,940 psi89%2349 fps96.9%
IMR 3031<<locked>>82%35,810 psi88%2395 fps100%
IMR 4895<<locked>>82%36,434 psi90%2405 fps96.7%
Lovex S062<<locked>>82%35,360 psi87%2339 fps97.6%
Norma 203B<<locked>>82%34,983 psi86%2365 fps96.1%
ReloadSwiss RS 14ᴾ<<locked>>100%34,780 psi86%1617 fps100%
ReloadSwiss RS 52<<locked>>82%36,709 psi90%2461 fps96%
ReloadSwiss RS 60<<locked>>86%34,650 psi85%2441 fps98.6%
Rottweil R 903<<locked>>86%34,577 psi85%2362 fps96.8%
Shooters World Precision<<locked>>82%35,360 psi87%2339 fps97.6%
SNPE Vectan SP 11<<locked>>86%35,839 psi88%2408 fps96.2%
SNPE Vectan Tubal 5000<<locked>>84%35,621 psi88%2283 fps99.8%
Somchem S355<<locked>>86%35,723 psi88%2372 fps96.9%
Somchem S365<<locked>>96%34,983 psi86%2448 fps98%
Vihtavuori N135<<locked>>82%35,882 psi88%2346 fps100%
Vihtavuori N140<<locked>>82%36,434 psi90%2343 fps99.7%
Vihtavuori N150<<locked>>92%36,448 psi90%2365 fps98.3%
Vihtavuori N540<<locked>>82%36,216 psi89%2365 fps99.4%
Winchester 6.5 StaBALL<<locked>>90%34,911 psi86%2336 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 4064<<locked>>80%31,430 psi77%2287 fps98.9%
Alliant Reloder- TS 15.5<<locked>>80%30,806 psi76%2267 fps95.6%
Alliant Reloder-17<<locked>>86%32,489 psi80%2372 fps95.2%
Bofors RP3<<locked>>80%30,052 psi74%2264 fps95.5%
Hodgdon Hybrid 100V<<locked>>92%31,923 psi79%2306 fps95.1%
Hodgdon LEVERevolution<<locked>>80%33,765 psi83%2369 fps96.7%
Hodgdon TrailBoss<<locked>>80%25,541 psi63%1411 fps100%
Hodgdon VARGET<<locked>>80%33,779 psi83%2303 fps96.2%
IMR 3031<<locked>>80%33,504 psi83%2346 fps99.9%
IMR 4895<<locked>>80%34,287 psi84%2356 fps95.9%
Lovex S062<<locked>>80%33,257 psi82%2293 fps97%
Norma 203B<<locked>>80%32,924 psi81%2316 fps95.4%
ReloadSwiss RS 1411.5 gr80%26,005 psi64%1450 fps100%
ReloadSwiss RS 52<<locked>>80%34,447 psi85%2408 fps95.2%
ReloadSwiss RS 60<<locked>>80%28,601 psi70%2274 fps96%
Rottweil R 903<<locked>>82%30,211 psi74%2260 fps95.2%
Shooters World Precision<<locked>>80%33,257 psi82%2293 fps97%
SNPE Vectan SP 11<<locked>>84%33,794 psi83%2359 fps95.4%
SNPE Vectan Tubal 5000<<locked>>80%31,633 psi78%2201 fps99.3%
Somchem S355<<locked>>82%31,575 psi78%2277 fps95.4%
Somchem S36537.3 gr90%29,008 psi71%2293 fps95.5%
Vihtavuori N135<<locked>>80%33,910 psi84%2306 fps100%
Vihtavuori N140<<locked>>80%34,243 psi84%2300 fps99.4%
Vihtavuori N15032.3 gr82%26,832 psi66%2142 fps95%
Vihtavuori N540<<locked>>80%33,808 psi83%2313 fps99%
Winchester 6.5 StaBALL<<locked>>88%32,750 psi81%2287 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for 7 x 72 R loaded with the .284 | 150gr | Nosler Ballistic Tip Hunting. ReloadSwiss RS 52 delivers the highest muzzle velocity at 2,461 fps; across all powders the maximum-charge window runs from 1,585 fps to 2,461 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 85–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.284" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Somchem S365, Vihtavuori N150, ReloadSwiss RS 14 rank at the top here: for 7 x 72 R with the .284 | 150gr | Nosler Ballistic Tip Hunting they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data