Load data for 7 x 72 R + .284 | 142gr | Lehigh Defense Controlled Chaos

7 x 72 R cartridge drawing
Lehigh Defense logo

Load Specifications

Bullet Manufacturer:Lehigh Defense
Bullet Weight:142 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.831"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:9.5

Load data in caliber 7 x 72 R with .284 | 142gr | Lehigh Defense Controlled Chaos bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 60, Vihtavuori N150 and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>84%34,983 psi86%2402 fps100%
Accurate 4064<<locked>>86%35,128 psi87%2428 fps99.2%
Alliant Reloder- TS 15.5<<locked>>86%34,650 psi85%2411 fps96.2%
Bofors RP3<<locked>>88%36,347 psi90%2464 fps96.9%
Hodgdon LEVERevolution<<locked>>84%35,810 psi88%2467 fps96.5%
Hodgdon TrailBossᴾ<<locked>>100%34,055 psi84%1608 fps100%
Hodgdon VARGET<<locked>>82%36,216 psi89%2408 fps96.1%
IMR 3031<<locked>>82%36,100 psi89%2461 fps99.9%
Lovex D073.6<<locked>>82%35,143 psi87%2418 fps98.3%
Lovex S062<<locked>>84%34,911 psi86%2385 fps96.7%
Norma 201<<locked>>82%36,579 psi90%2402 fps97.1%
Norma 202<<locked>>82%36,550 psi90%2421 fps99.1%
ReloadSwiss RS 14ᴾ<<locked>>100%34,403 psi85%1650 fps100%
ReloadSwiss RS 60<<locked>>88%34,476 psi85%2480 fps97.6%
Rottweil R 902<<locked>>82%34,722 psi86%2356 fps96.5%
Rottweil R 903<<locked>>90%36,289 psi89%2454 fps96.5%
Shooters World Match Rifle<<locked>>82%35,143 psi87%2418 fps98.3%
Shooters World Precision<<locked>>84%34,911 psi86%2385 fps96.7%
SNPE Vectan Tubal 5000<<locked>>86%35,694 psi88%2339 fps99.5%
Somchem S355<<locked>>88%35,259 psi87%2415 fps95.8%
Somchem S365ᴾ<<locked>>100%36,608 psi90%2530 fps97.5%
Vihtavuori N135<<locked>>84%35,607 psi88%2402 fps100%
Vihtavuori N140<<locked>>82%34,563 psi85%2359 fps99%
Vihtavuori N150<<locked>>90%35,839 psi88%2405 fps97.5%
Vihtavuori N540<<locked>>84%35,360 psi87%2395 fps98.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%30,603 psi75%2306 fps99.7%
Accurate 4064<<locked>>80%28,993 psi71%2283 fps97.7%
Alliant Reloder- TS 15.5<<locked>>84%32,518 psi80%2362 fps95.4%
Bofors RP3<<locked>>84%31,662 psi78%2359 fps95.2%
Hodgdon LEVERevolution<<locked>>82%33,431 psi82%2408 fps95.6%
Hodgdon TrailBoss<<locked>>80%25,382 psi63%1440 fps100%
Hodgdon VARGET<<locked>>80%34,026 psi84%2359 fps95.3%
IMR 3031<<locked>>80%33,750 psi83%2411 fps99.7%
Lovex D073.6<<locked>>80%32,938 psi81%2372 fps97.8%
Lovex S062<<locked>>80%30,792 psi76%2287 fps95.2%
Norma 201<<locked>>80%34,345 psi85%2356 fps96.5%
Norma 202<<locked>>80%34,287 psi84%2372 fps98.7%
ReloadSwiss RS 1411.2 gr80%25,498 psi63%1473 fps100%
ReloadSwiss RS 6035.9 gr84%30,327 psi75%2369 fps95.7%
Rottweil R 902<<locked>>80%32,619 psi80%2306 fps95.8%
Rottweil R 903<<locked>>88%33,982 psi84%2405 fps95.7%
Shooters World Match Rifle<<locked>>80%32,938 psi81%2372 fps97.8%
Shooters World Precision<<locked>>80%30,792 psi76%2287 fps95.2%
SNPE Vectan Tubal 5000<<locked>>80%29,356 psi72%2201 fps98.2%
Somchem S355<<locked>>86%33,112 psi82%2365 fps95%
Somchem S365<<locked>>94%30,472 psi75%2375 fps95%
Vihtavuori N135<<locked>>80%31,169 psi77%2306 fps99.7%
Vihtavuori N140<<locked>>80%32,430 psi80%2313 fps98.5%
Vihtavuori N15033.9 gr84%29,588 psi73%2264 fps95.3%
Vihtavuori N540<<locked>>80%30,995 psi76%2297 fps97.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 51 powders for 7 x 72 R loaded with the .284 | 142gr | Lehigh Defense Controlled Chaos. Somchem S365 delivers the highest muzzle velocity at 2,530 fps; across all powders the maximum-charge window runs from 1,608 fps to 2,530 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 51 of the 51 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 75–90 %, leaving at least 10 % headroom. The 142.0 gr projectile in 0.284" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, Somchem S365 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 60, Vihtavuori N150, ReloadSwiss RS 14 rank at the top here: for 7 x 72 R with the .284 | 142gr | Lehigh Defense Controlled Chaos they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 4350, ADI AR 2208, Alliant Power Pro 2000-MR burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data