Load data for 7 x 72 R + .284 | 140gr | Nosler Ballistic Tip Hunting

7 x 72 R cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:140 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.831"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:11.0

Load data in caliber 7 x 72 R with .284 | 140gr | Nosler Ballistic Tip Hunting bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 60, Somchem S365 and Vihtavuori N150.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>84%36,143 psi89%2451 fps100%
Accurate 4064<<locked>>86%36,230 psi89%2480 fps99.4%
Alliant Reloder- TS 15.5<<locked>>86%35,650 psi88%2464 fps96.6%
Bofors RP3<<locked>>86%35,012 psi86%2464 fps96.5%
Hodgdon Hybrid 100V<<locked>>98%36,608 psi90%2493 fps96%
Hodgdon LEVERevolution<<locked>>84%34,505 psi85%2467 fps96.2%
Hodgdon TrailBossᴾ<<locked>>100%34,447 psi85%1644 fps100%
Hodgdon VARGET<<locked>>84%36,622 psi90%2451 fps96.3%
IMR 3031<<locked>>84%36,187 psi89%2493 fps99.9%
Lovex D073.6<<locked>>82%36,448 psi90%2477 fps98.7%
Lovex S062<<locked>>84%35,940 psi89%2434 fps97.1%
ReloadSwiss RS 14ᴾ<<locked>>100%34,432 psi85%1677 fps100%
ReloadSwiss RS 60<<locked>>88%35,563 psi88%2543 fps98.1%
Rottweil R 902<<locked>>82%35,781 psi88%2408 fps97%
Rottweil R 903<<locked>>88%34,896 psi86%2454 fps96.1%
Shooters World Match Rifle<<locked>>82%36,448 psi90%2477 fps98.7%
Shooters World Precision<<locked>>84%35,940 psi89%2434 fps97.1%
SNPE Vectan SP 9<<locked>>82%36,695 psi90%2461 fps95.7%
SNPE Vectan Tubal 5000<<locked>>86%36,376 psi90%2385 fps99.6%
Somchem S355<<locked>>88%36,172 psi89%2464 fps96.3%
Somchem S365<<locked>>98%35,679 psi88%2543 fps97.4%
Vihtavuori N135<<locked>>84%36,535 psi90%2451 fps100%
Vihtavuori N140<<locked>>82%34,882 psi86%2398 fps99.1%
Vihtavuori N150<<locked>>92%34,693 psi85%2415 fps97.3%
Vihtavuori N540<<locked>>84%36,738 psi90%2461 fps99.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%31,560 psi78%2356 fps99.8%
Accurate 4064<<locked>>80%29,892 psi74%2333 fps98%
Alliant Reloder- TS 15.5<<locked>>82%31,299 psi77%2362 fps95%
Bofors RP3<<locked>>84%32,648 psi80%2408 fps95.7%
Hodgdon Hybrid 100V<<locked>>96%34,490 psi85%2444 fps95.2%
Hodgdon LEVERevolution<<locked>>82%32,532 psi80%2418 fps95.4%
Hodgdon TrailBoss<<locked>>80%25,425 psi63%1463 fps100%
Hodgdon VARGET<<locked>>82%34,461 psi85%2402 fps95.6%
IMR 3031<<locked>>80%32,039 psi79%2402 fps99.5%
Lovex D073.6<<locked>>80%33,953 psi84%2421 fps98.1%
Lovex S062<<locked>>80%31,618 psi78%2336 fps95.6%
ReloadSwiss RS 14<<locked>>80%25,527 psi63%1499 fps100%
ReloadSwiss RS 6036.4 gr82%29,225 psi72%2365 fps95.2%
Rottweil R 902<<locked>>80%33,431 psi82%2356 fps96.2%
Rottweil R 903<<locked>>86%32,808 psi81%2405 fps95.4%
Shooters World Match Rifle<<locked>>80%33,953 psi84%2421 fps98.1%
Shooters World Precision<<locked>>80%31,618 psi78%2336 fps95.6%
SNPE Vectan SP 9<<locked>>80%34,563 psi85%2411 fps95%
SNPE Vectan Tubal 5000<<locked>>80%30,153 psi74%2247 fps98.5%
Somchem S355<<locked>>86%34,040 psi84%2418 fps95.5%
Somchem S36539.6 gr94%31,444 psi77%2434 fps95.7%
Vihtavuori N135<<locked>>80%32,155 psi79%2359 fps99.8%
Vihtavuori N140<<locked>>80%32,764 psi81%2352 fps98.6%
Vihtavuori N15034.3 gr86%28,834 psi71%2274 fps95.1%
Vihtavuori N540<<locked>>80%32,343 psi80%2365 fps98.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 49 powders for 7 x 72 R loaded with the .284 | 140gr | Nosler Ballistic Tip Hunting. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,543 fps; across all powders the maximum-charge window runs from 1,644 fps to 2,543 fps. Alliant Reloder-23 gives the best case fill at 100 %, and 49 of the 49 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 74–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.284" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Alliant Reloder-23, Hodgdon TrailBoss, IMR 4831 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 60, Somchem S365, Vihtavuori N150 rank at the top here: for 7 x 72 R with the .284 | 140gr | Nosler Ballistic Tip Hunting they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 4350, ADI AR 2208, Alliant Power Pro 2000-MR burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data