Load data for 7 x 72 R + .284 | 140gr | Frontier BTSP

7 x 72 R cartridge drawing
Frontier Bullets logo

Load Specifications

Bullet Manufacturer:Frontier Bullets
Bullet Weight:140 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.831"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:9.0

Load data in caliber 7 x 72 R with .284 | 140gr | Frontier BTSP bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 60, Vihtavuori N150 and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>86%36,535 psi90%2448 fps100%
Accurate 4064<<locked>>88%36,695 psi90%2477 fps99.3%
Alliant Reloder- TS 15.5<<locked>>88%36,274 psi89%2461 fps96.5%
Bofors RP3<<locked>>88%35,360 psi87%2457 fps96.3%
Hodgdon BL-C2<<locked>>82%36,419 psi90%2470 fps97.5%
Hodgdon LEVERevolution<<locked>>84%35,215 psi87%2467 fps96.1%
Hodgdon TrailBossᴾ<<locked>>100%34,243 psi84%1621 fps100%
IMR 3031<<locked>>82%35,360 psi87%2464 fps99.8%
Lovex D073.6<<locked>>82%34,447 psi85%2421 fps98%
Lovex S062<<locked>>86%36,521 psi90%2431 fps97%
Norma 201<<locked>>82%35,926 psi88%2405 fps96.7%
Norma 202<<locked>>82%35,868 psi88%2421 fps98.8%
ReloadSwiss RS 14ᴾ<<locked>>100%34,214 psi84%1657 fps100%
ReloadSwiss RS 60<<locked>>90%36,332 psi89%2539 fps98%
Rottweil R 902<<locked>>84%36,260 psi89%2405 fps96.8%
Rottweil R 903<<locked>>90%35,549 psi88%2454 fps96%
Shooters World Match Rifle<<locked>>82%34,447 psi85%2421 fps98%
Shooters World Precision<<locked>>86%36,521 psi90%2431 fps97%
SNPE Vectan Tubal 5000<<locked>>86%35,070 psi86%2343 fps99.3%
Somchem S365ᴾ<<locked>>100%35,984 psi89%2530 fps97.1%
Vihtavuori N135<<locked>>84%34,911 psi86%2405 fps100%
Vihtavuori N140<<locked>>84%36,158 psi89%2408 fps99.1%
Vihtavuori N150<<locked>>90%35,157 psi87%2405 fps97.1%
Vihtavuori N540<<locked>>84%34,751 psi86%2395 fps98.5%
Winchester StaBALL Match<<locked>>84%36,593 psi90%2461 fps96.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%29,950 psi74%2306 fps99.5%
Accurate 4064<<locked>>80%28,340 psi70%2283 fps97.2%
Alliant Reloder- TS 15.5<<locked>>86%33,997 psi84%2411 fps95.7%
Bofors RP3<<locked>>86%33,098 psi82%2405 fps95.5%
Hodgdon BL-C2<<locked>>80%33,910 psi84%2415 fps96.7%
Hodgdon LEVERevolution<<locked>>82%32,866 psi81%2408 fps95.1%
Hodgdon TrailBoss<<locked>>80%25,193 psi62%1444 fps100%
IMR 3031<<locked>>80%33,083 psi81%2415 fps99.5%
Lovex D073.6<<locked>>80%32,271 psi79%2369 fps97.4%
Lovex S062<<locked>>82%32,184 psi79%2336 fps95.5%
Norma 201<<locked>>80%33,765 psi83%2356 fps96%
Norma 202<<locked>>80%33,634 psi83%2372 fps98.4%
ReloadSwiss RS 1411.1 gr80%25,295 psi62%1480 fps100%
ReloadSwiss RS 6035.7 gr84%29,849 psi74%2365 fps95.1%
Rottweil R 902<<locked>>80%32,256 psi79%2313 fps95.4%
Rottweil R 903<<locked>>88%33,330 psi82%2405 fps95.2%
Shooters World Match Rifle<<locked>>80%32,271 psi79%2369 fps97.4%
Shooters World Precision<<locked>>82%32,184 psi79%2336 fps95.5%
SNPE Vectan Tubal 5000<<locked>>80%29,037 psi72%2208 fps97.9%
Somchem S365<<locked>>96%31,836 psi78%2425 fps95.3%
Vihtavuori N135<<locked>>80%30,748 psi76%2316 fps99.6%
Vihtavuori N140<<locked>>80%31,792 psi78%2313 fps98.2%
Vihtavuori N15034.5 gr86%30,951 psi76%2310 fps95.6%
Vihtavuori N540<<locked>>80%30,414 psi75%2297 fps97.2%
Winchester StaBALL Match<<locked>>82%34,142 psi84%2408 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 54 powders for 7 x 72 R loaded with the .284 | 140gr | Frontier BTSP. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,539 fps; across all powders the maximum-charge window runs from 1,621 fps to 2,539 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 54 of the 54 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 84–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.284" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, Somchem S365 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 60, Vihtavuori N150, ReloadSwiss RS 14 rank at the top here: for 7 x 72 R with the .284 | 140gr | Frontier BTSP they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 4350, ADI AR 2208, Alliant Power Pro 2000-MR burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data