Load data for 7 x 72 R + .284 | 140gr | Barnes Solid

7 x 72 R cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:140 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.831"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:9.5

Load data in caliber 7 x 72 R with .284 | 140gr | Barnes Solid bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 60, Vihtavuori N150 and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>84%34,534 psi85%2408 fps100%
Accurate 4064<<locked>>86%34,737 psi86%2438 fps99%
Alliant Reloder- TS 15.5<<locked>>88%36,550 psi90%2470 fps96.6%
Bofors RP3<<locked>>88%35,940 psi89%2470 fps96.6%
Hodgdon BL-C2<<locked>>82%36,709 psi90%2477 fps97.6%
Hodgdon LEVERevolution<<locked>>84%35,404 psi87%2474 fps96.2%
Hodgdon TrailBossᴾ<<locked>>100%34,185 psi84%1624 fps100%
Hodgdon VARGET<<locked>>82%35,839 psi88%2418 fps95.8%
IMR 3031<<locked>>82%35,694 psi88%2474 fps99.8%
Lovex D073.6<<locked>>82%34,998 psi86%2434 fps98.2%
Lovex S062<<locked>>84%34,577 psi85%2392 fps96.4%
Norma 201<<locked>>82%36,230 psi89%2411 fps96.9%
Norma 202<<locked>>82%36,172 psi89%2431 fps98.9%
ReloadSwiss RS 14ᴾ<<locked>>100%34,505 psi85%1667 fps100%
ReloadSwiss RS 60<<locked>>90%36,477 psi90%2546 fps98.1%
Rottweil R 902<<locked>>84%36,579 psi90%2411 fps96.9%
Rottweil R 903<<locked>>90%35,810 psi88%2461 fps96.2%
Shooters World Match Rifle<<locked>>82%34,998 psi86%2434 fps98.2%
Shooters World Precision<<locked>>84%34,577 psi85%2392 fps96.4%
SNPE Vectan Tubal 5000<<locked>>86%35,317 psi87%2349 fps99.4%
Somchem S365ᴾ<<locked>>100%36,434 psi90%2543 fps97.3%
Vihtavuori N135<<locked>>84%35,244 psi87%2415 fps100%
Vihtavuori N140<<locked>>84%36,434 psi90%2418 fps99.2%
Vihtavuori N150<<locked>>90%35,404 psi87%2415 fps97.2%
Vihtavuori N540<<locked>>84%34,983 psi86%2402 fps98.6%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%30,269 psi75%2316 fps99.6%
Accurate 4064<<locked>>80%28,645 psi71%2293 fps97.4%
Alliant Reloder- TS 15.5<<locked>>84%32,184 psi79%2372 fps95.1%
Bofors RP3<<locked>>86%33,663 psi83%2421 fps95.8%
Hodgdon BL-C2<<locked>>80%34,490 psi85%2431 fps97%
Hodgdon LEVERevolution<<locked>>82%33,098 psi82%2418 fps95.3%
Hodgdon TrailBoss<<locked>>80%25,222 psi62%1447 fps100%
Hodgdon VARGET<<locked>>80%33,678 psi83%2369 fps95%
IMR 3031<<locked>>80%33,431 psi82%2425 fps99.6%
Lovex D073.6<<locked>>80%32,561 psi80%2379 fps97.5%
Lovex S062<<locked>>82%32,474 psi80%2343 fps95.7%
Norma 201<<locked>>80%34,055 psi84%2362 fps96.2%
Norma 202<<locked>>80%33,982 psi84%2382 fps98.5%
ReloadSwiss RS 1411.2 gr80%25,309 psi62%1483 fps100%
ReloadSwiss RS 6036 gr84%30,052 psi74%2375 fps95.3%
Rottweil R 902<<locked>>80%32,561 psi80%2323 fps95.6%
Rottweil R 903<<locked>>88%33,547 psi83%2411 fps95.4%
Shooters World Match Rifle<<locked>>80%32,561 psi80%2379 fps97.5%
Shooters World Precision<<locked>>82%32,474 psi80%2343 fps95.7%
SNPE Vectan Tubal 5000<<locked>>80%29,327 psi72%2218 fps98.1%
Somchem S365<<locked>>96%32,227 psi79%2441 fps95.6%
Vihtavuori N135<<locked>>80%31,096 psi77%2323 fps99.7%
Vihtavuori N140<<locked>>80%32,126 psi79%2323 fps98.3%
Vihtavuori N15034.8 gr86%31,154 psi77%2316 fps95.8%
Vihtavuori N540<<locked>>80%30,690 psi76%2306 fps97.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 53 powders for 7 x 72 R loaded with the .284 | 140gr | Barnes Solid. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,546 fps; across all powders the maximum-charge window runs from 1,624 fps to 2,546 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 53 of the 53 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 74–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.284" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, Somchem S365 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 60, Vihtavuori N150, ReloadSwiss RS 14 rank at the top here: for 7 x 72 R with the .284 | 140gr | Barnes Solid they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 4350, ADI AR 2208, Alliant Power Pro 2000-MR burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data