Load data for 7 x 72 R + .284 | 140gr | Barnes MRX BT

7 x 72 R cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:140 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.831"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:11.5

Load data in caliber 7 x 72 R with .284 | 140gr | Barnes MRX BT bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 60, Somchem S365 and Vihtavuori N150.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>84%35,331 psi87%2454 fps100%
Accurate 4064<<locked>>86%35,505 psi87%2484 fps99.4%
Alliant Reloder- TS 15.5<<locked>>86%35,331 psi87%2474 fps96.7%
Bofors RP3<<locked>>86%34,737 psi86%2474 fps96.6%
Hodgdon Hybrid 100V<<locked>>98%36,608 psi90%2513 fps96.3%
Hodgdon LEVERevolution<<locked>>84%36,506 psi90%2530 fps97.1%
Hodgdon TrailBossᴾ<<locked>>100%34,185 psi84%1654 fps100%
Lovex D073.6<<locked>>82%35,998 psi89%2484 fps98.7%
Lovex S062<<locked>>84%35,549 psi88%2444 fps97.2%
ReloadSwiss RS 14ᴾ<<locked>>100%34,432 psi85%1693 fps100%
ReloadSwiss RS 60<<locked>>88%35,288 psi87%2556 fps98.3%
Rottweil R 902<<locked>>82%35,070 psi86%2411 fps97%
Rottweil R 903<<locked>>88%34,621 psi85%2464 fps96.3%
Shooters World Match Rifle<<locked>>82%35,998 psi89%2484 fps98.7%
Shooters World Precision<<locked>>84%35,549 psi88%2444 fps97.2%
SNPE Vectan SP 9<<locked>>82%36,666 psi90%2477 fps95.9%
SNPE Vectan Tubal 5000<<locked>>86%36,158 psi89%2395 fps99.7%
Somchem S355<<locked>>88%35,969 psi89%2477 fps96.4%
Somchem S365<<locked>>98%35,302 psi87%2552 fps97.5%
Vihtavuori N135<<locked>>84%36,318 psi89%2461 fps100%
Vihtavuori N140<<locked>>82%35,056 psi86%2418 fps99.2%
Vihtavuori N150<<locked>>88%34,287 psi84%2418 fps97.3%
Vihtavuori N540<<locked>>84%36,129 psi89%2454 fps99.1%
Winchester 6.5 StaBALL<<locked>>92%35,592 psi88%2444 fps95.9%
Winchester StaBALL Match<<locked>>82%35,752 psi88%2477 fps96.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%30,792 psi76%2356 fps99.8%
Accurate 4064<<locked>>80%29,153 psi72%2333 fps97.9%
Alliant Reloder- TS 15.5<<locked>>82%30,937 psi76%2369 fps95.1%
Bofors RP3<<locked>>84%32,329 psi80%2421 fps95.8%
Hodgdon Hybrid 100V<<locked>>96%34,214 psi84%2457 fps95.4%
Hodgdon LEVERevolution<<locked>>80%31,937 psi79%2421 fps95.4%
Hodgdon TrailBoss<<locked>>80%25,324 psi62%1476 fps100%
Lovex D073.6<<locked>>80%33,518 psi83%2431 fps98.2%
Lovex S062<<locked>>80%31,241 psi77%2343 fps95.7%
ReloadSwiss RS 14<<locked>>80%25,367 psi62%1509 fps100%
ReloadSwiss RS 6037.3 gr82%28,993 psi71%2379 fps95.5%
Rottweil R 902<<locked>>80%33,025 psi81%2365 fps96.3%
Rottweil R 903<<locked>>86%32,532 psi80%2415 fps95.5%
Shooters World Match Rifle<<locked>>80%33,518 psi83%2431 fps98.2%
Shooters World Precision<<locked>>80%31,241 psi77%2343 fps95.7%
SNPE Vectan SP 9<<locked>>80%34,287 psi84%2425 fps95.1%
SNPE Vectan Tubal 5000<<locked>>80%29,965 psi74%2260 fps98.6%
Somchem S355<<locked>>86%33,591 psi83%2425 fps95.6%
Somchem S36540.5 gr94%31,082 psi77%2444 fps95.8%
Vihtavuori N135<<locked>>80%31,908 psi79%2369 fps99.9%
Vihtavuori N140<<locked>>80%32,953 psi81%2372 fps98.8%
Vihtavuori N15036 gr84%30,008 psi74%2320 fps95.8%
Vihtavuori N540<<locked>>80%31,546 psi78%2352 fps98%
Winchester 6.5 StaBALL<<locked>>90%33,402 psi82%2395 fps95%
Winchester StaBALL Match<<locked>>80%33,156 psi82%2418 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 48 powders for 7 x 72 R loaded with the .284 | 140gr | Barnes MRX BT. ReloadSwiss RS 62 delivers the highest muzzle velocity at 2,569 fps; across all powders the maximum-charge window runs from 1,654 fps to 2,569 fps. Alliant Reloder-23 gives the best case fill at 100 %, and 48 of the 48 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 74–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.284" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Alliant Reloder-23, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 60, Somchem S365, Vihtavuori N150 rank at the top here: for 7 x 72 R with the .284 | 140gr | Barnes MRX BT they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 4350, ADI AR 2208, Alliant Power Pro 2000-MR burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data