
Load Specifications
Load data in caliber 7 x 72 R with .284 | 133gr | MRR Green Hunting bullet and 21 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 60, Vihtavuori N150 and ReloadSwiss RS 14.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 25.6"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 4064 | <<locked>> | 86% | 35,650 psi | 88% | 2539 fps | 99.1% |
| Alliant Reloder- TS 15.5 | <<locked>> | 86% | 35,114 psi | 86% | 2523 fps | 96% |
| Bofors RP3 | <<locked>> | 86% | 34,374 psi | 85% | 2520 fps | 95.9% |
| Hodgdon LEVERevolution | <<locked>> | 84% | 36,289 psi | 89% | 2579 fps | 96.3% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 34,360 psi | 85% | 1696 fps | 100% |
| IMR 3031 | <<locked>> | 84% | 35,520 psi | 87% | 2552 fps | 99.8% |
| Lovex D073.6 | <<locked>> | 82% | 35,621 psi | 88% | 2530 fps | 98.2% |
| Lovex S062 | <<locked>> | 84% | 35,273 psi | 87% | 2490 fps | 96.5% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 34,330 psi | 85% | 1732 fps | 100% |
| ReloadSwiss RS 60 | <<locked>> | 88% | 34,853 psi | 86% | 2592 fps | 97.4% |
| Rottweil R 902 | <<locked>> | 82% | 35,230 psi | 87% | 2467 fps | 96.4% |
| Rottweil R 903 | <<locked>> | 90% | 36,695 psi | 90% | 2562 fps | 96.3% |
| Shooters World Match Rifle | <<locked>> | 82% | 35,621 psi | 88% | 2530 fps | 98.2% |
| Shooters World Precision | <<locked>> | 84% | 35,273 psi | 87% | 2490 fps | 96.5% |
| SNPE Vectan Tubal 5000 | <<locked>> | 86% | 36,013 psi | 89% | 2448 fps | 99.4% |
| Somchem S365 | <<locked>> | 98% | 35,056 psi | 86% | 2595 fps | 96.7% |
| Vihtavuori N133 | <<locked>> | 82% | 36,201 psi | 89% | 2444 fps | 99.9% |
| Vihtavuori N135 | <<locked>> | 84% | 35,882 psi | 88% | 2510 fps | 100% |
| Vihtavuori N140 | <<locked>> | 84% | 36,622 psi | 90% | 2507 fps | 99.2% |
| Vihtavuori N150 | <<locked>> | 94% | 36,506 psi | 90% | 2523 fps | 97.4% |
| Vihtavuori N540 | <<locked>> | 84% | 36,260 psi | 89% | 2523 fps | 98.8% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 25.6"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 4064 | <<locked>> | 80% | 29,312 psi | 72% | 2385 fps | 97.4% |
| Alliant Reloder- TS 15.5 | <<locked>> | 84% | 32,793 psi | 81% | 2467 fps | 95.1% |
| Bofors RP3 | <<locked>> | 84% | 32,082 psi | 79% | 2464 fps | 95% |
| Hodgdon LEVERevolution | <<locked>> | 82% | 33,750 psi | 83% | 2516 fps | 95.4% |
| Hodgdon TrailBoss | <<locked>> | 80% | 25,295 psi | 62% | 1512 fps | 100% |
| IMR 3031 | <<locked>> | 80% | 31,314 psi | 77% | 2454 fps | 99.1% |
| Lovex D073.6 | <<locked>> | 80% | 33,257 psi | 82% | 2477 fps | 97.6% |
| Lovex S062 | <<locked>> | 82% | 33,243 psi | 82% | 2444 fps | 95.8% |
| ReloadSwiss RS 14 | 11.9 gr | 80% | 25,382 psi | 63% | 1549 fps | 100% |
| ReloadSwiss RS 60 | 38.3 gr | 84% | 30,690 psi | 76% | 2474 fps | 95.4% |
| Rottweil R 902 | <<locked>> | 80% | 32,938 psi | 81% | 2411 fps | 95.6% |
| Rottweil R 903 | <<locked>> | 88% | 34,548 psi | 85% | 2513 fps | 95.5% |
| Shooters World Match Rifle | <<locked>> | 80% | 33,257 psi | 82% | 2477 fps | 97.6% |
| Shooters World Precision | <<locked>> | 82% | 33,243 psi | 82% | 2444 fps | 95.8% |
| SNPE Vectan Tubal 5000 | <<locked>> | 80% | 29,747 psi | 73% | 2306 fps | 98.1% |
| Somchem S365 | <<locked>> | 96% | 32,822 psi | 81% | 2536 fps | 95.7% |
| Vihtavuori N133 | <<locked>> | 80% | 34,040 psi | 84% | 2398 fps | 99.8% |
| Vihtavuori N135 | <<locked>> | 80% | 31,618 psi | 78% | 2418 fps | 99.6% |
| Vihtavuori N140 | <<locked>> | 80% | 32,256 psi | 79% | 2408 fps | 98.2% |
| Vihtavuori N150 | 36.1 gr | 88% | 30,226 psi | 74% | 2375 fps | 95.2% |
| Vihtavuori N540 | <<locked>> | 80% | 32,010 psi | 79% | 2425 fps | 97.7% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 21 powders for 7 x 72 R loaded with the .284 | 133gr | MRR Green Hunting. Somchem S365 delivers the highest muzzle velocity at 2,595 fps; across all powders the maximum-charge window runs from 1,696 fps to 2,595 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 21 of the 21 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (280 MPa), the top charges use 85–90 %, leaving at least 10 % headroom. The 133.0 gr projectile in 0.284" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 60, Vihtavuori N150, ReloadSwiss RS 14 rank at the top here: for 7 x 72 R with the .284 | 133gr | MRR Green Hunting they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.