top of page

Load data for 7 x 72 R + .284 | 130gr | AERO SOLR,- smax:18.20

Recommended Powder(s): none

7 x 72 R + .284 | 130gr | AERO SOLR,- smax:18.20

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.284 | 130gr | AERO SOLR,- smax:18.20
Bullet Weight:
130gr | 8.4g
Bullet Diameter:
0.284" | 7.21mm
Bullet Length:
1.346" | 34.2mm
Caliber:
7 x 72 R load data
Case Length (l3):
2.831" | 71.9mm
Cartridge Length (C.O.L.):
3.568" | 90.6mm
Seated Depth:
0.609" | 15.5mm
Shank Seated Depth:
0.412" | 10.5mm
Case Capacity:
54.0 Grains of Water | 3.51 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
40611 psi | 2800 bar
LID:
LID_B49_C1099
Last updated:
2025-02-02
Recommended Twist Rate:
1:9 - 1:8

Load data for 24 loads in caliber 7 x 72 R with .284 | 130gr | AERO SOLR,- smax:18.20 bullet and 12 powders such as none. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 4350]*
<<locked>>
86%
35984
89%
**44
91%
[Alliant Reloder-23]*
<<locked>>
96%
35752
88%
**44
92%
[Hodgdon Hybrid 100V]*
<<locked>>
89%
36376
90%
**15
93%
[IMR 4831]*
<<locked>>
91%
36434
90%
**38
92%
[Norma URP]*
<<locked>>
86%
36289
89%
**41
91%
ReloadSwiss RS 14
<<locked>>
96%
34896
86%
**80
100%
[ReloadSwiss RS 60]*
<<locked>>
84%
36289
89%
**77
94%
Somchem S365
<<locked>>
89%
35679
88%
**64
95%
Vihtavuori N150
<<locked>>
84%
36172
89%
**82
96%
[Vihtavuori N550]*
<<locked>>
83%
36361
90%
**44
91%
[Vihtavuori N555]*
<<locked>>
95%
36056
89%
**90
92%
[Winchester 6.5 StaBALL]*
<<locked>>
84%
35853
88%
**65
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 4350]*
<<locked>>
83%
33475
82%
**79
90%
[Alliant Reloder-23]*
<<locked>>
92%
32358
80%
**49
90%
[Hodgdon Hybrid 100V]*
<<locked>>
81%
30545
75%
**54
90%
[IMR 4831]*
<<locked>>
87%
33910
84%
**65
90%
[Norma URP]*
<<locked>>
84%
34505
85%
**95
90%
ReloadSwiss RS 14
<<locked>>
91%
32895
81%
**44
100%
[ReloadSwiss RS 60]*
<<locked>>
81%
34214
84%
**15
93%
[Somchem S365]*
<<locked>>
81%
29791
73%
**83
92%
Vihtavuori N150
<<locked>>
81%
33591
83%
**16
95%
[Vihtavuori N550]*
<<locked>>
81%
34490
85%
**95
90%
[Vihtavuori N555]*
<<locked>>
90%
33069
81%
**02
90%
[Winchester 6.5 StaBALL]*
<<locked>>
81%
32851
81%
**90
92%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page