Load data for 7 x 72 R + .283 | 140gr | Rhino Penetrator

7 x 72 R cartridge drawing
Rhino Bullets logo

Load Specifications

Bullet Manufacturer:Rhino Bullets
Bullet Weight:140 gr
Bullet Diameter:0.283"
Bullet Length:<<locked>>
Case Length (l3):2.831"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:54 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:10.5

Load data in caliber 7 x 72 R with .283 | 140gr | Rhino Penetrator bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 60, Vihtavuori N150 and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>84%35,723 psi88%2441 fps100%
Accurate 4064<<locked>>86%35,839 psi88%2467 fps99.3%
Alliant Reloder- TS 15.5<<locked>>86%35,288 psi87%2454 fps96.4%
Bofors RP3<<locked>>86%34,650 psi85%2454 fps96.4%
Hodgdon Hybrid 100V<<locked>>98%36,361 psi90%2484 fps95.9%
Hodgdon LEVERevolution<<locked>>86%36,535 psi90%2510 fps96.8%
Hodgdon TrailBossᴾ<<locked>>100%34,113 psi84%1634 fps100%
Hodgdon VARGET<<locked>>84%36,289 psi89%2438 fps96.1%
IMR 3031<<locked>>84%36,042 psi89%2487 fps99.9%
Lovex D073.6<<locked>>82%36,071 psi89%2464 fps98.6%
Lovex S062<<locked>>84%35,563 psi88%2425 fps96.9%
ReloadSwiss RS 14ᴾ<<locked>>100%34,432 psi85%1673 fps100%
ReloadSwiss RS 60<<locked>>88%35,273 psi87%2530 fps98%
Rottweil R 902<<locked>>82%35,404 psi87%2398 fps96.8%
Rottweil R 903<<locked>>88%34,838 psi86%2448 fps96%
Shooters World Match Rifle<<locked>>82%36,071 psi89%2464 fps98.6%
Shooters World Precision<<locked>>84%35,563 psi88%2425 fps96.9%
SNPE Vectan Tubal 5000<<locked>>86%35,998 psi89%2372 fps99.6%
Somchem S355<<locked>>88%35,810 psi88%2454 fps96.1%
Somchem S365<<locked>>98%35,143 psi87%2526 fps97.1%
Vihtavuori N133<<locked>>82%36,535 psi90%2375 fps100%
Vihtavuori N135<<locked>>84%36,419 psi90%2444 fps100%
Vihtavuori N140<<locked>>82%34,766 psi86%2395 fps99%
Vihtavuori N150<<locked>>94%36,579 psi90%2451 fps97.7%
Vihtavuori N540<<locked>>84%36,709 psi90%2457 fps99.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%31,401 psi77%2349 fps99.8%
Accurate 4064<<locked>>80%29,747 psi73%2326 fps97.9%
Alliant Reloder- TS 15.5<<locked>>84%33,185 psi82%2405 fps95.7%
Bofors RP3<<locked>>84%32,503 psi80%2405 fps95.6%
Hodgdon Hybrid 100V<<locked>>96%34,258 psi84%2434 fps95%
Hodgdon LEVERevolution<<locked>>82%32,227 psi79%2408 fps95.2%
Hodgdon TrailBoss<<locked>>80%25,353 psi62%1460 fps100%
Hodgdon VARGET<<locked>>82%34,113 psi84%2388 fps95.4%
IMR 3031<<locked>>80%31,633 psi78%2388 fps99.4%
Lovex D073.6<<locked>>80%33,605 psi83%2411 fps98%
Lovex S062<<locked>>80%31,502 psi78%2329 fps95.5%
ReloadSwiss RS 1411.5 gr80%25,469 psi63%1493 fps100%
ReloadSwiss RS 6036.1 gr82%29,008 psi71%2356 fps95%
Rottweil R 902<<locked>>80%33,344 psi82%2349 fps96.1%
Rottweil R 903<<locked>>86%32,430 psi80%2395 fps95.1%
Shooters World Match Rifle<<locked>>80%33,605 psi83%2411 fps98%
Shooters World Precision<<locked>>80%31,502 psi78%2329 fps95.5%
SNPE Vectan Tubal 5000<<locked>>80%30,066 psi74%2244 fps98.4%
Somchem S355<<locked>>86%33,721 psi83%2405 fps95.3%
Somchem S365<<locked>>94%31,227 psi77%2425 fps95.5%
Vihtavuori N133<<locked>>80%34,301 psi84%2329 fps99.9%
Vihtavuori N135<<locked>>80%31,981 psi79%2352 fps99.8%
Vihtavuori N140<<locked>>80%32,416 psi80%2343 fps98.5%
Vihtavuori N15034.1 gr86%28,732 psi71%2267 fps95%
Vihtavuori N540<<locked>>80%32,271 psi79%2359 fps98.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 50 powders for 7 x 72 R loaded with the .283 | 140gr | Rhino Penetrator. Alliant Power Pro 2000-MR delivers the highest muzzle velocity at 2,536 fps; across all powders the maximum-charge window runs from 1,634 fps to 2,536 fps. Alliant Reloder-23 gives the best case fill at 100 %, and 50 of the 50 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 74–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.283" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Alliant Reloder-23, Hodgdon TrailBoss, IMR 4831 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 60, Vihtavuori N150, ReloadSwiss RS 14 rank at the top here: for 7 x 72 R with the .283 | 140gr | Rhino Penetrator they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 4350, ADI AR 2208, Alliant Power Pro 2000-MR burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data