Load data for 7 x 57 R + .284 | 104gr | GM Geschoss-Manufaktur Splinter Tip

7 x 57 R cartridge drawing
GM Geschoss-Manufaktur logo

Load Specifications

Bullet Manufacturer:GM Geschoss-Manufaktur
Bullet Weight:104 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.244"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:60 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:49,313 psi
Recommended Twist Rate:1:9.0

Load data in caliber 7 x 57 R with .284 | 104gr | GM Geschoss-Manufaktur Splinter Tip bullet and 43 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 60, IMR 3031 and Accurate 4064.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>88%44,541 psi90%2966 fps99.9%
Accurate 2460<<locked>>84%42,554 psi86%2953 fps98.2%
Accurate 2495<<locked>>94%42,873 psi87%2995 fps100%
Accurate 2520<<locked>>88%43,221 psi88%3005 fps98.1%
Accurate 4064<<locked>>96%43,004 psi87%3022 fps98.9%
ADI Benchmark 8208<<locked>>88%43,453 psi88%2972 fps96.3%
Alliant AR-Comp<<locked>>90%44,556 psi90%3051 fps100%
Alliant Reloder- TS 15.5<<locked>>96%43,004 psi87%3012 fps95.9%
Alliant Reloder-10x<<locked>>82%41,785 psi85%2930 fps100%
Hodgdon Benchmark<<locked>>86%43,265 psi88%2927 fps96.9%
Hodgdon BL-C2<<locked>>90%44,135 psi90%3041 fps97.2%
Hodgdon H322<<locked>>84%43,555 psi88%3002 fps99.3%
Hodgdon H335<<locked>>84%44,599 psi90%3018 fps98.8%
Hodgdon TrailBossᴾ<<locked>>100%33,417 psi68%1946 fps100%
IMR 3031<<locked>>90%42,148 psi85%3031 fps99.6%
IMR 4198<<locked>>82%43,265 psi88%2920 fps100%
IMR 8208 XBR<<locked>>88%43,453 psi88%2972 fps96.3%
Lovex D073.5<<locked>>84%42,308 psi86%2946 fps97.1%
Lovex D073.6<<locked>>92%44,440 psi90%3038 fps98.3%
Lovex S062<<locked>>94%43,250 psi88%2982 fps96.4%
Norma 201<<locked>>90%42,424 psi86%2953 fps96.1%
Norma 202<<locked>>90%42,743 psi87%2982 fps98.5%
ReloadSwiss RS 14ᴾ<<locked>>100%33,402 psi68%1988 fps100%
ReloadSwiss RS 40<<locked>>84%43,308 psi88%2972 fps97.7%
ReloadSwiss RS 60<<locked>>98%43,888 psi89%3110 fps97.7%
Rottweil R 901<<locked>>88%43,642 psi89%2969 fps98.4%
Rottweil R 902<<locked>>92%42,714 psi87%2949 fps96.2%
Shooters World Match Rifle<<locked>>92%44,440 psi90%3038 fps98.3%
Shooters World Precision<<locked>>94%43,250 psi88%2982 fps96.4%
SNPE Vectan SP 3<<locked>>82%42,627 psi86%2946 fps99.6%
SNPE Vectan Tubal 3000<<locked>>88%42,409 psi86%2884 fps98.3%
SNPE Vectan Tubal 5000<<locked>>96%44,469 psi90%2933 fps99.4%
Somchem S321<<locked>>86%43,845 psi89%3002 fps96.8%
Somchem S335<<locked>>90%43,990 psi89%2933 fps99.2%
Vihtavuori N130<<locked>>84%42,598 psi86%2890 fps100%
Vihtavuori N133<<locked>>88%42,250 psi86%2894 fps99.8%
Vihtavuori N135<<locked>>94%43,859 psi89%3005 fps100%
Vihtavuori N140<<locked>>92%43,221 psi88%2963 fps98.9%
Vihtavuori N150<<locked>>98%41,901 psi85%2943 fps96.6%
Vihtavuori N530<<locked>>88%43,671 psi89%2972 fps96.5%
Vihtavuori N540<<locked>>94%44,425 psi90%2999 fps98.7%
Winchester 748<<locked>>88%42,047 psi85%3005 fps97%
Winchester StaBALL Match<<locked>>92%44,440 psi90%3031 fps95.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>80%34,113 psi69%2743 fps98.7%
Accurate 2460<<locked>>80%37,028 psi75%2831 fps96.9%
Accurate 2495<<locked>>80%26,353 psi53%2585 fps96.4%
Accurate 2520<<locked>>82%34,954 psi71%2815 fps95.7%
Accurate 406440.8 gr86%30,574 psi62%2723 fps95.4%
ADI Benchmark 8208<<locked>>86%40,640 psi82%2913 fps95.5%
Alliant AR-Comp<<locked>>80%31,604 psi64%2769 fps99.8%
Alliant Reloder- TS 15.5<<locked>>94%40,364 psi82%2956 fps95.1%
Alliant Reloder-10x<<locked>>80%39,204 psi80%2877 fps99.9%
Hodgdon Benchmark<<locked>>82%38,203 psi77%2812 fps95.4%
Hodgdon BL-C2<<locked>>86%38,479 psi78%2917 fps95.6%
Hodgdon H322<<locked>>80%38,101 psi77%2881 fps98.3%
Hodgdon H335<<locked>>80%38,667 psi78%2894 fps97.6%
Hodgdon TrailBoss<<locked>>80%24,555 psi50%1739 fps100%
IMR 303137.5 gr80%30,023 psi61%2730 fps96.6%
IMR 4198<<locked>>80%40,596 psi82%2867 fps100%
IMR 8208 XBR<<locked>>86%40,640 psi82%2913 fps95.5%
Lovex D073.5<<locked>>80%36,854 psi75%2825 fps95.4%
Lovex D073.6<<locked>>84%33,446 psi68%2789 fps95.1%
Lovex S062<<locked>>92%40,422 psi82%2920 fps95.6%
Norma 201<<locked>>88%39,929 psi81%2897 fps95.4%
Norma 202<<locked>>82%32,648 psi66%2740 fps95.6%
ReloadSwiss RS 14<<locked>>80%24,410 psi50%1775 fps100%
ReloadSwiss RS 40<<locked>>80%37,782 psi77%2848 fps96.2%
ReloadSwiss RS 6047.9 gr94%38,406 psi78%2972 fps95.7%
Rottweil R 901<<locked>>80%33,997 psi69%2740 fps95.8%
Rottweil R 902<<locked>>90%40,147 psi81%2894 fps95.4%
Shooters World Match Rifle<<locked>>84%33,446 psi68%2789 fps95.1%
Shooters World Precision<<locked>>92%40,422 psi82%2920 fps95.6%
SNPE Vectan SP 3<<locked>>80%39,943 psi81%2890 fps99.2%
SNPE Vectan Tubal 3000<<locked>>80%32,706 psi66%2657 fps95.6%
SNPE Vectan Tubal 5000<<locked>>82%28,152 psi57%2549 fps95%
Somchem S321<<locked>>82%38,072 psi77%2874 fps95.1%
Somchem S335<<locked>>80%32,111 psi65%2661 fps96.4%
Vihtavuori N130<<locked>>80%37,362 psi76%2779 fps99.7%
Vihtavuori N133<<locked>>80%32,619 psi66%2677 fps98.2%
Vihtavuori N135<<locked>>80%27,485 psi56%2612 fps96.7%
Vihtavuori N140<<locked>>82%31,024 psi63%2677 fps95.4%
Vihtavuori N150<<locked>>96%39,320 psi80%2887 fps95.8%
Vihtavuori N530<<locked>>86%40,756 psi83%2910 fps95.6%
Vihtavuori N540<<locked>>84%31,908 psi65%2710 fps95.1%
Winchester 748<<locked>>84%36,680 psi74%2881 fps95.2%
Winchester StaBALL Match<<locked>>90%41,524 psi84%2969 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 74 powders for 7 x 57 R loaded with the .284 | 104gr | GM Geschoss-Manufaktur Splinter Tip. ReloadSwiss RS 60 delivers the highest muzzle velocity at 3,110 fps; across all powders the maximum-charge window runs from 1,946 fps to 3,110 fps. Alliant Reloder-17 gives the best case fill at 100 %, and 74 of the 74 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (340 MPa), the top charges use 67–90 %, leaving at least 10 % headroom. The 104.0 gr projectile in 0.284" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Alliant Reloder-17, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 60, IMR 3031, Accurate 4064 rank at the top here: for 7 x 57 R with the .284 | 104gr | GM Geschoss-Manufaktur Splinter Tip they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, ADI AR 2206H, ADI AR 2208, Alliant Power Pro 2000-MR burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data