Load data for 7 x 50 R + .284 | 160gr | North Fork FPS

7 x 50 R cartridge drawing
North Fork logo

Load Specifications

Bullet Manufacturer:North Fork
Bullet Weight:160 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:11.5

Load data in caliber 7 x 50 R with .284 | 160gr | North Fork FPS bullet and 44 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are SNPE Vectan SP 10, Hodgdon H335 and ADI AR 2219.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%45,107 psi85%2021 fps99.9%
Accurate 2015ᴾ<<locked>>100%43,323 psi82%2073 fps99.5%
Accurate 2460<<locked>>98%44,846 psi85%2113 fps97.5%
Accurate 2495ᴾ<<locked>>100%31,415 psi59%1969 fps97.9%
Accurate 2520ᴾ<<locked>>100%39,276 psi74%2080 fps95.8%
Accurate LT-30<<locked>>92%46,369 psi88%2028 fps98.9%
Accurate LT-32<<locked>>92%46,818 psi88%2031 fps97.3%
ADI AR 2207<<locked>>92%47,877 psi90%2104 fps100%
ADI AR 2219<<locked>>94%46,050 psi87%2144 fps98.8%
Alliant AR-Compᴾ<<locked>>100%41,307 psi78%2106 fps100%
Alliant Reloder-10x<<locked>>96%44,425 psi84%2104 fps100%
Alliant Reloder-7<<locked>>90%46,746 psi88%2074 fps100%
Baschieri & Pellagri 106<<locked>>94%46,644 psi88%2064 fps99.1%
Hodgdon Benchmark<<locked>>98%44,237 psi84%2056 fps95.6%
Hodgdon H322ᴾ<<locked>>100%46,209 psi87%2144 fps98.8%
Hodgdon H335<<locked>>94%44,585 psi84%2131 fps97.8%
Hodgdon H4198<<locked>>90%44,904 psi85%2023 fps98.3%
Hodgdon TrailBossᴾ<<locked>>100%31,821 psi60%1245 fps100%
IMR 3031ᴾ<<locked>>100%35,592 psi67%2019 fps97.3%
IMR 4198<<locked>>96%47,268 psi89%2090 fps100%
IMR 4227<<locked>>84%45,484 psi86%2005 fps100%
Lovex D073.4<<locked>>92%46,311 psi87%2129 fps97.2%
Lovex D073.5<<locked>>98%44,802 psi85%2116 fps96.2%
Lovex S053<<locked>>86%47,195 psi89%2004 fps100%
Norma 200<<locked>>92%44,831 psi85%2094 fps100%
Norma 202ᴾ<<locked>>100%39,276 psi74%2055 fps96.7%
ReloadSwiss RS 14ᴾ<<locked>>100%31,836 psi60%1271 fps100%
ReloadSwiss RS 36<<locked>>86%47,659 psi90%2068 fps100%
ReloadSwiss RS 40<<locked>>98%46,499 psi88%2132 fps97.1%
Rottweil R 901ᴾ<<locked>>100%43,468 psi82%2082 fps97.3%
Shooters World AR Plus<<locked>>92%46,311 psi87%2129 fps97.2%
SNPE Vectan BA6 1/2<<locked>>88%46,267 psi87%1871 fps100%
SNPE Vectan SP 10<<locked>>94%45,643 psi86%2140 fps97.9%
SNPE Vectan SP 3<<locked>>96%45,977 psi87%2106 fps99.4%
SNPE Vectan Tubal 3000ᴾ<<locked>>100%43,918 psi83%2026 fps97.3%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%35,534 psi67%1910 fps96.1%
Somchem S321ᴾ<<locked>>100%46,586 psi88%2158 fps95.9%
Somchem S335ᴾ<<locked>>100%41,713 psi79%2023 fps97.8%
Vihtavuori N120<<locked>>94%46,934 psi89%2053 fps100%
Vihtavuori N130<<locked>>98%45,049 psi85%2059 fps99.9%
Vihtavuori N133ᴾ<<locked>>100%39,363 psi74%1990 fps98.8%
Vihtavuori N135ᴾ<<locked>>100%34,534 psi65%1988 fps98.3%
Vihtavuori N140ᴾ<<locked>>100%37,318 psi70%1992 fps96.2%
Winchester 748ᴾ<<locked>>100%46,673 psi88%2164 fps96.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%37,507 psi71%1913 fps99.3%
Accurate 2015<<locked>>84%26,803 psi51%1795 fps95.6%
Accurate 2460<<locked>>90%34,621 psi65%1959 fps95%
Accurate 2495<<locked>>92%24,265 psi46%1821 fps95.2%
Accurate 2520<<locked>>98%36,709 psi69%2041 fps95%
Accurate LT-30<<locked>>80%32,416 psi61%1814 fps95.8%
Accurate LT-32<<locked>>86%38,957 psi74%1919 fps95.5%
ADI AR 2207<<locked>>80%33,330 psi63%1904 fps100%
ADI AR 221919.8 gr82%31,314 psi59%1901 fps95.1%
Alliant AR-Comp<<locked>>80%22,234 psi42%1728 fps95.7%
Alliant Reloder-10x<<locked>>80%27,441 psi52%1818 fps97.2%
Alliant Reloder-7<<locked>>80%34,838 psi66%1902 fps99.3%
Baschieri & Pellagri 106<<locked>>80%30,153 psi57%1807 fps95.4%
Hodgdon Benchmark<<locked>>96%42,032 psi79%2024 fps95%
Hodgdon H322<<locked>>88%31,705 psi60%1909 fps95.3%
Hodgdon H33521.9 gr86%34,389 psi65%1968 fps95%
Hodgdon H4198<<locked>>80%33,446 psi63%1841 fps95.5%
Hodgdon TrailBoss<<locked>>80%23,061 psi44%1108 fps100%
IMR 3031<<locked>>94%29,182 psi55%1906 fps95.2%
IMR 4198<<locked>>80%29,892 psi56%1816 fps98.6%
IMR 4227<<locked>>80%40,654 psi77%1941 fps100%
Lovex D073.4<<locked>>86%37,521 psi71%2005 fps95.1%
Lovex D073.5<<locked>>96%41,858 psi79%2075 fps95.6%
Lovex S053<<locked>>80%39,537 psi75%1908 fps100%
Norma 200<<locked>>80%31,140 psi59%1881 fps98.9%
Norma 202<<locked>>96%34,171 psi65%1973 fps95.2%
ReloadSwiss RS 14<<locked>>80%22,756 psi43%1133 fps100%
ReloadSwiss RS 36<<locked>>80%40,045 psi76%1969 fps100%
ReloadSwiss RS 40<<locked>>92%38,595 psi73%2017 fps95.2%
Rottweil R 901<<locked>>94%35,984 psi68%1968 fps95.5%
Shooters World AR Plus<<locked>>86%37,521 psi71%2005 fps95.1%
SNPE Vectan BA6 1/2<<locked>>80%37,159 psi70%1762 fps100%
SNPE Vectan SP 1021.5 gr86%35,621 psi67%1986 fps95.5%
SNPE Vectan SP 3<<locked>>80%28,616 psi54%1814 fps95.1%
SNPE Vectan Tubal 3000<<locked>>94%36,158 psi68%1921 fps95.5%
SNPE Vectan Tubal 5000<<locked>>98%32,445 psi61%1870 fps95.4%
Somchem S321<<locked>>98%43,511 psi82%2116 fps95.2%
Somchem S335<<locked>>92%32,401 psi61%1884 fps95.5%
Vihtavuori N120<<locked>>80%31,401 psi59%1839 fps100%
Vihtavuori N130<<locked>>80%26,455 psi50%1752 fps96.5%
Vihtavuori N133<<locked>>88%27,717 psi52%1784 fps95.6%
Vihtavuori N135<<locked>>90%25,773 psi49%1804 fps95%
Vihtavuori N140<<locked>>98%34,360 psi65%1952 fps95.5%
Winchester 748<<locked>>98%42,757 psi81%2122 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 70 powders for 7 x 50 R loaded with the .284 | 160gr | North Fork FPS. Alliant Power Pro 1200-R delivers the highest muzzle velocity at 2,192 fps; across all powders the maximum-charge window runs from 1,245 fps to 2,192 fps. Accurate 2015 gives the best case fill at 100 %, and 70 of the 70 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 56–90 %, leaving at least 10 % headroom. The 160.0 gr projectile in 0.284" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Accurate 2520 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. SNPE Vectan SP 10, Hodgdon H335, ADI AR 2219 rank at the top here: for 7 x 50 R with the .284 | 160gr | North Fork FPS they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2200, Accurate 2230, Accurate 4064 burn incompletely and react more sensitively to barrel length and temperature. Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data