Load data for 7 x 50 R + .284 | 145gr | Brenneke Teilmantel

7 x 50 R cartridge drawing
Brenneke logo

Load Specifications

Bullet Manufacturer:Brenneke
Bullet Weight:145 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:13.0

Load data in caliber 7 x 50 R with .284 | 145gr | Brenneke Teilmantel bullet and 45 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, SNPE Vectan SP 10 and ADI AR 2219.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%47,543 psi90%2231 fps100%
Accurate 2015ᴾ<<locked>>100%46,224 psi87%2290 fps99.7%
Accurate 2460<<locked>>98%47,805 psi90%2333 fps98.1%
Accurate 2495ᴾ<<locked>>100%34,345 psi65%2182 fps98.5%
Accurate 2520ᴾ<<locked>>100%44,309 psi84%2323 fps97.1%
Accurate LT-30<<locked>>90%45,614 psi86%2198 fps98.8%
Accurate LT-32<<locked>>90%46,108 psi87%2201 fps97.2%
ADI AR 2207<<locked>>90%47,326 psi89%2274 fps100%
ADI AR 2219<<locked>>92%45,208 psi85%2310 fps98.7%
Alliant AR-Compᴾ<<locked>>100%42,786 psi81%2316 fps100%
Alliant Reloder-10x<<locked>>96%47,079 psi89%2316 fps100%
Alliant Reloder-7<<locked>>88%46,557 psi88%2247 fps100%
Baschieri & Pellagri 106<<locked>>92%46,238 psi87%2231 fps99.1%
Hodgdon Benchmark<<locked>>98%46,557 psi88%2264 fps96.1%
Hodgdon H322<<locked>>96%46,804 psi88%2333 fps98.9%
Hodgdon H335<<locked>>96%47,718 psi90%2352 fps98.3%
Hodgdon H4198<<locked>>88%47,630 psi90%2238 fps98.7%
Hodgdon TrailBossᴾ<<locked>>100%31,894 psi60%1371 fps100%
IMR 3031ᴾ<<locked>>100%40,785 psi77%2300 fps98.7%
IMR 4198<<locked>>94%46,514 psi88%2257 fps100%
IMR 4227<<locked>>82%45,179 psi85%2172 fps100%
Lovex D073.4<<locked>>90%45,963 psi87%2306 fps97.1%
Lovex D073.5<<locked>>98%47,906 psi90%2333 fps96.8%
Lovex S053<<locked>>84%46,325 psi88%2165 fps100%
Norma 200<<locked>>92%47,630 psi90%2306 fps100%
Norma 202ᴾ<<locked>>100%41,104 psi78%2257 fps97.1%
ReloadSwiss RS 14ᴾ<<locked>>100%31,314 psi59%1398 fps100%
ReloadSwiss RS 36<<locked>>84%47,413 psi90%2241 fps100%
ReloadSwiss RS 40<<locked>>96%46,340 psi88%2306 fps97%
Rottweil R 901ᴾ<<locked>>100%45,469 psi86%2290 fps97.7%
Shooters World AR Plus<<locked>>90%45,963 psi87%2306 fps97.1%
SNPE Vectan BA6 1/2<<locked>>88%47,790 psi90%2054 fps100%
SNPE Vectan SP 10<<locked>>92%45,527 psi86%2316 fps97.8%
SNPE Vectan SP 3<<locked>>94%45,745 psi86%2283 fps99.3%
SNPE Vectan Tubal 3000ᴾ<<locked>>100%45,455 psi86%2228 fps97.7%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%36,361 psi69%2100 fps96.6%
Somchem S321<<locked>>98%46,253 psi87%2329 fps95.8%
Somchem S335ᴾ<<locked>>100%43,671 psi82%2231 fps98.3%
Vihtavuori N120<<locked>>90%47,471 psi90%2234 fps100%
Vihtavuori N130<<locked>>96%45,571 psi86%2241 fps99.9%
Vihtavuori N133ᴾ<<locked>>100%44,367 psi84%2234 fps99.5%
Vihtavuori N135ᴾ<<locked>>100%36,564 psi69%2195 fps98.7%
Vihtavuori N140ᴾ<<locked>>100%39,450 psi75%2205 fps96.9%
Vihtavuori N540ᴾ<<locked>>100%37,623 psi71%2188 fps95.8%
Winchester 748ᴾ<<locked>>100%44,193 psi83%2323 fps95.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%39,030 psi74%2106 fps99.4%
Accurate 2015<<locked>>82%26,600 psi50%1939 fps95.4%
Accurate 2460<<locked>>90%36,753 psi69%2162 fps95.6%
Accurate 2495<<locked>>90%24,424 psi46%1969 fps95%
Accurate 2520<<locked>>96%38,682 psi73%2234 fps95.7%
Accurate LT-30<<locked>>80%33,750 psi64%1998 fps96.2%
Accurate LT-32<<locked>>84%38,363 psi72%2077 fps95.3%
ADI AR 2207<<locked>>80%34,940 psi66%2090 fps100%
ADI AR 221922.7 gr82%32,590 psi62%2087 fps95.5%
Alliant AR-Comp<<locked>>80%23,279 psi44%1900 fps96.1%
Alliant Reloder-10x<<locked>>80%29,109 psi55%2005 fps97.6%
Alliant Reloder-7<<locked>>80%36,419 psi69%2090 fps99.5%
Baschieri & Pellagri 106<<locked>>80%31,517 psi60%1985 fps95.8%
Hodgdon Benchmark<<locked>>96%44,048 psi83%2224 fps95.5%
Hodgdon H32222.5 gr84%31,836 psi60%2070 fps95.2%
Hodgdon H335<<locked>>88%36,709 psi69%2175 fps95.7%
Hodgdon H4198<<locked>>80%37,275 psi70%2070 fps96.6%
Hodgdon TrailBoss<<locked>>80%23,119 psi44%1217 fps100%
IMR 3031<<locked>>90%30,124 psi57%2083 fps95.5%
IMR 4198<<locked>>80%31,517 psi60%2005 fps98.9%
IMR 4227<<locked>>80%42,511 psi80%2136 fps100%
Lovex D073.4<<locked>>84%37,362 psi71%2172 fps95%
Lovex D073.5<<locked>>94%41,989 psi79%2247 fps95.5%
Lovex S053<<locked>>80%41,640 psi79%2103 fps100%
Norma 200<<locked>>80%32,692 psi62%2064 fps99.1%
Norma 202<<locked>>94%34,113 psi64%2133 fps95%
ReloadSwiss RS 14<<locked>>80%23,206 psi44%1250 fps100%
ReloadSwiss RS 36<<locked>>80%41,713 psi79%2162 fps100%
ReloadSwiss RS 40<<locked>>92%40,770 psi77%2221 fps95.7%
Rottweil R 901<<locked>>92%36,187 psi68%2133 fps95.4%
Shooters World AR Plus<<locked>>84%37,362 psi71%2172 fps95%
SNPE Vectan BA6 1/2<<locked>>80%38,580 psi73%1936 fps100%
SNPE Vectan SP 1024.1 gr84%34,969 psi66%2136 fps95.1%
SNPE Vectan SP 3<<locked>>80%29,733 psi56%1995 fps95.5%
SNPE Vectan Tubal 3000<<locked>>92%35,723 psi67%2073 fps95.3%
SNPE Vectan Tubal 5000<<locked>>96%32,387 psi61%2024 fps95.3%
Somchem S321<<locked>>96%43,192 psi82%2283 fps95%
Somchem S335<<locked>>90%32,111 psi61%2031 fps95.3%
Vihtavuori N120<<locked>>80%35,114 psi66%2060 fps100%
Vihtavuori N130<<locked>>80%28,123 psi53%1932 fps96.9%
Vihtavuori N133<<locked>>84%27,557 psi52%1926 fps95.4%
Vihtavuori N135<<locked>>90%27,238 psi51%1995 fps95.7%
Vihtavuori N140<<locked>>96%34,795 psi66%2119 fps95.5%
Vihtavuori N540<<locked>>98%35,592 psi67%2149 fps95.1%
Winchester 748<<locked>>98%41,785 psi79%2283 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 72 powders for 7 x 50 R loaded with the .284 | 145gr | Brenneke Teilmantel. Alliant Power Pro 1200-R delivers the highest muzzle velocity at 2,375 fps; across all powders the maximum-charge window runs from 1,371 fps to 2,375 fps. Accurate 2015 gives the best case fill at 100 %, and 72 of the 72 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 59–90 %, leaving at least 10 % headroom. The 145.0 gr projectile in 0.284" calls for a 1:13.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Accurate 2520 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, SNPE Vectan SP 10, ADI AR 2219 rank at the top here: for 7 x 50 R with the .284 | 145gr | Brenneke Teilmantel they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2200, Accurate 2230, ADI AR 2206H burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data