Load data for 7 x 50 R + .284 | 140gr | Nosler Expansion Tip

7 x 50 R cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:140 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:10.0

Load data in caliber 7 x 50 R with .284 | 140gr | Nosler Expansion Tip bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-7, ADI AR 2207 and Norma 200.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%46,064 psi87%2156 fps99.1%
Accurate 2015ᴾ<<locked>>100%34,592 psi65%2067 fps96.1%
Accurate LT-30<<locked>>98%46,949 psi89%2149 fps97.2%
ADI AR 2205<<locked>>84%47,616 psi90%2073 fps100%
ADI AR 2207<<locked>>98%47,021 psi89%2238 fps100%
ADI AR 2219ᴾ<<locked>>100%46,253 psi87%2254 fps96.8%
Alliant AR-Compᴾ<<locked>>100%32,692 psi62%2080 fps97.8%
Alliant Reloder-10xᴾ<<locked>>100%40,843 psi77%2182 fps98.7%
Alliant Reloder-7<<locked>>96%46,862 psi89%2205 fps99.6%
Baschieri & Pellagri 106ᴾ<<locked>>100%47,007 psi89%2178 fps97.5%
Hodgdon H4198<<locked>>94%45,890 psi87%2146 fps96.4%
Hodgdon TrailBossᴾ<<locked>>100%29,544 psi56%1296 fps100%
IMR 4198ᴾ<<locked>>100%44,266 psi84%2172 fps99.6%
IMR 4227<<locked>>90%46,485 psi88%2146 fps100%
Lovex D060<<locked>>84%47,877 psi90%2182 fps99.7%
Lovex S053<<locked>>92%46,978 psi89%2139 fps100%
Norma 200ᴾ<<locked>>100%46,398 psi88%2251 fps99.7%
ReloadSwiss RS 14ᴾ<<locked>>100%28,761 psi54%1322 fps100%
ReloadSwiss RS 36<<locked>>90%45,440 psi86%2172 fps100%
Shooters World Buffalo Rifle<<locked>>84%47,877 psi90%2182 fps99.7%
Shooters World SOCOM<<locked>>84%47,805 psi90%2159 fps99.9%
SNPE Vectan BA6 1/2<<locked>>94%46,354 psi88%2008 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%42,511 psi80%2178 fps97.1%
Vihtavuori N110<<locked>>86%47,253 psi89%2073 fps100%
Vihtavuori N120<<locked>>98%47,297 psi89%2198 fps100%
Vihtavuori N130ᴾ<<locked>>100%39,610 psi75%2106 fps98.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%31,299 psi59%1919 fps96%
Accurate 2015<<locked>>98%32,140 psi61%2024 fps95.3%
Accurate LT-30<<locked>>92%39,102 psi74%2034 fps95.4%
ADI AR 2205<<locked>>80%41,829 psi79%2001 fps100%
ADI AR 220716.6 gr80%26,571 psi50%1896 fps98.4%
ADI AR 2219<<locked>>96%40,045 psi76%2162 fps95.3%
Alliant AR-Comp<<locked>>94%27,224 psi51%1955 fps95.5%
Alliant Reloder-10x<<locked>>88%28,137 psi53%1952 fps95.3%
Alliant Reloder-717.2 gr80%28,297 psi53%1893 fps95.8%
Baschieri & Pellagri 106<<locked>>94%38,957 psi74%2064 fps95.7%
Hodgdon H4198<<locked>>90%40,959 psi77%2073 fps95.2%
Hodgdon TrailBoss<<locked>>80%21,509 psi41%1155 fps100%
IMR 4198<<locked>>82%26,934 psi51%1854 fps95.3%
IMR 4227<<locked>>80%34,447 psi65%1962 fps99.1%
Lovex D060<<locked>>80%42,090 psi80%2096 fps99.2%
Lovex S053<<locked>>80%33,634 psi64%1946 fps100%
Norma 20017.8 gr82%25,802 psi49%1890 fps95.2%
ReloadSwiss RS 14<<locked>>80%21,016 psi40%1181 fps100%
ReloadSwiss RS 36<<locked>>80%33,069 psi62%1978 fps98.8%
Shooters World Buffalo Rifle<<locked>>80%42,090 psi80%2096 fps99.2%
Shooters World SOCOM<<locked>>80%42,047 psi79%2080 fps99.6%
SNPE Vectan BA6 1/2<<locked>>80%31,604 psi60%1811 fps100%
SNPE Vectan SP 3<<locked>>94%35,810 psi68%2067 fps95.3%
Vihtavuori N110<<locked>>80%39,262 psi74%1972 fps100%
Vihtavuori N120<<locked>>80%26,934 psi51%1877 fps99.3%
Vihtavuori N130<<locked>>90%29,240 psi55%1919 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 45 powders for 7 x 50 R loaded with the .284 | 140gr | Nosler Expansion Tip. SNPE Vectan SP 10 delivers the highest muzzle velocity at 2,257 fps; across all powders the maximum-charge window runs from 1,296 fps to 2,257 fps. Accurate 2015 gives the best case fill at 100 %, and 45 of the 45 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 44–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.284" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, Accurate 2495 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-7, ADI AR 2207, Norma 200 rank at the top here: for 7 x 50 R with the .284 | 140gr | Nosler Expansion Tip they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2460, Accurate 2495, Hodgdon Benchmark burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data