Load data for 7 x 50 R + .284 | 140gr | Frontier BTSP

7 x 50 R cartridge drawing
Frontier Bullets logo

Load Specifications

Bullet Manufacturer:Frontier Bullets
Bullet Weight:140 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:9.0

Load data in caliber 7 x 50 R with .284 | 140gr | Frontier BTSP bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, Norma 200 and ReloadSwiss RS 36.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%46,949 psi89%2152 fps99.2%
Accurate 2015ᴾ<<locked>>100%35,215 psi67%2064 fps96.2%
Accurate LT-30<<locked>>98%47,108 psi89%2139 fps97.1%
ADI AR 2205<<locked>>82%44,918 psi85%2028 fps100%
ADI AR 2207<<locked>>98%47,297 psi89%2228 fps100%
ADI AR 2219ᴾ<<locked>>100%46,630 psi88%2247 fps96.8%
Alliant AR-Compᴾ<<locked>>100%33,663 psi64%2083 fps97.9%
Alliant Reloder-10xᴾ<<locked>>100%41,234 psi78%2175 fps98.7%
Alliant Reloder-7<<locked>>96%47,210 psi89%2195 fps99.6%
Baschieri & Pellagri 106ᴾ<<locked>>100%47,340 psi89%2172 fps97.4%
Hodgdon H4198<<locked>>94%46,644 psi88%2142 fps96.4%
Hodgdon TrailBossᴾ<<locked>>100%29,863 psi56%1293 fps100%
IMR 4198ᴾ<<locked>>100%44,991 psi85%2172 fps99.6%
IMR 4227<<locked>>90%47,050 psi89%2139 fps100%
Lovex D060<<locked>>82%45,063 psi85%2129 fps99.5%
Lovex S053<<locked>>92%47,761 psi90%2136 fps100%
Norma 200ᴾ<<locked>>100%47,079 psi89%2244 fps99.7%
ReloadSwiss RS 14ᴾ<<locked>>100%29,167 psi55%1319 fps100%
ReloadSwiss RS 36<<locked>>90%45,600 psi86%2162 fps100%
Shooters World Buffalo Rifle<<locked>>82%45,063 psi85%2129 fps99.5%
Shooters World SOCOM<<locked>>82%45,179 psi85%2113 fps99.8%
SNPE Vectan BA6 1/2<<locked>>94%46,296 psi87%1995 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%43,366 psi82%2178 fps97.2%
Vihtavuori N110<<locked>>84%45,150 psi85%2034 fps100%
Vihtavuori N120<<locked>>98%47,514 psi90%2192 fps100%
Vihtavuori N130ᴾ<<locked>>100%40,582 psi77%2106 fps98.2%
Vihtavuori N133ᴾ<<locked>>100%35,418 psi67%2021 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%31,662 psi60%1913 fps96%
Accurate 2015<<locked>>98%33,228 psi63%2028 fps95.5%
Accurate LT-30<<locked>>92%39,813 psi75%2034 fps95.4%
ADI AR 2205<<locked>>80%42,395 psi80%1995 fps100%
ADI AR 220716.4 gr80%27,296 psi52%1900 fps98.5%
ADI AR 2219<<locked>>96%41,017 psi77%2162 fps95.4%
Alliant AR-Comp<<locked>>94%28,123 psi53%1959 fps95.7%
Alliant Reloder-10x<<locked>>88%28,616 psi54%1946 fps95.3%
Alliant Reloder-7<<locked>>80%29,138 psi55%1896 fps95.9%
Baschieri & Pellagri 106<<locked>>92%37,362 psi71%2024 fps95%
Hodgdon H4198<<locked>>90%41,118 psi78%2064 fps95.1%
Hodgdon TrailBoss<<locked>>80%21,770 psi41%1152 fps100%
IMR 4198<<locked>>82%27,543 psi52%1854 fps95.4%
IMR 4227<<locked>>80%35,012 psi66%1959 fps99.1%
Lovex D060<<locked>>80%42,598 psi80%2093 fps99.2%
Lovex S053<<locked>>80%34,258 psi65%1942 fps100%
Norma 20017.6 gr82%26,890 psi51%1900 fps95.5%
ReloadSwiss RS 14<<locked>>80%21,379 psi40%1175 fps100%
ReloadSwiss RS 3617.1 gr80%33,736 psi64%1978 fps98.8%
Shooters World Buffalo Rifle<<locked>>80%42,598 psi80%2093 fps99.2%
Shooters World SOCOM<<locked>>80%42,018 psi79%2067 fps99.5%
SNPE Vectan BA6 1/2<<locked>>80%32,169 psi61%1804 fps100%
SNPE Vectan SP 3<<locked>>94%36,100 psi68%2057 fps95.2%
Vihtavuori N110<<locked>>80%40,553 psi77%1978 fps100%
Vihtavuori N120<<locked>>80%27,659 psi52%1880 fps99.3%
Vihtavuori N130<<locked>>90%30,110 psi57%1923 fps95.3%
Vihtavuori N133<<locked>>98%33,533 psi63%1985 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 7 x 50 R loaded with the .284 | 140gr | Frontier BTSP. ADI AR 2219 delivers the highest muzzle velocity at 2,247 fps; across all powders the maximum-charge window runs from 1,293 fps to 2,247 fps. Accurate 2015 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.284" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, ADI AR 2219, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, Norma 200, ReloadSwiss RS 36 rank at the top here: for 7 x 50 R with the .284 | 140gr | Frontier BTSP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data