Load data for 7 x 50 R + .284 | 140gr | Barnes X S

7 x 50 R cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:140 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:10.5

Load data in caliber 7 x 50 R with .284 | 140gr | Barnes X S bullet and 28 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, Norma 200 and Alliant Reloder-10x.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>88%46,702 psi88%2162 fps99.4%
Accurate 2015ᴾ<<locked>>100%41,785 psi79%2172 fps98.1%
Accurate 2460ᴾ<<locked>>100%45,397 psi86%2238 fps95.7%
Accurate 2495ᴾ<<locked>>100%30,893 psi58%2064 fps95.8%
Accurate LT-30<<locked>>94%47,123 psi89%2156 fps97.6%
ADI AR 2207<<locked>>92%45,368 psi86%2205 fps100%
ADI AR 2219<<locked>>96%46,514 psi88%2264 fps97.2%
Alliant AR-Compᴾ<<locked>>100%38,551 psi73%2185 fps99.3%
Alliant Reloder-10x<<locked>>98%45,063 psi85%2238 fps99.4%
Alliant Reloder-7<<locked>>92%47,776 psi90%2208 fps99.8%
Baschieri & Pellagri 106<<locked>>96%47,543 psi90%2188 fps97.9%
Hodgdon H322ᴾ<<locked>>100%47,747 psi90%2280 fps97.5%
Hodgdon H335<<locked>>98%45,585 psi86%2254 fps95.9%
Hodgdon H4198<<locked>>90%46,340 psi88%2156 fps96.9%
Hodgdon TrailBossᴾ<<locked>>100%31,270 psi59%1319 fps100%
IMR 4198<<locked>>98%47,776 psi90%2221 fps99.9%
IMR 4227<<locked>>86%46,470 psi88%2142 fps100%
Lovex S053<<locked>>86%45,934 psi87%2116 fps100%
Norma 200<<locked>>94%46,064 psi87%2231 fps99.8%
ReloadSwiss RS 14ᴾ<<locked>>100%31,357 psi59%1355 fps100%
ReloadSwiss RS 36<<locked>>86%45,992 psi87%2175 fps100%
SNPE Vectan BA6 1/2<<locked>>90%46,891 psi89%2005 fps100%
SNPE Vectan SP 10<<locked>>96%46,456 psi88%2267 fps96.2%
SNPE Vectan SP 3<<locked>>98%46,340 psi88%2234 fps98.2%
Vihtavuori N120<<locked>>92%45,426 psi86%2169 fps100%
Vihtavuori N130ᴾ<<locked>>100%46,195 psi87%2195 fps99.3%
Vihtavuori N133ᴾ<<locked>>100%40,292 psi76%2113 fps97.4%
Vihtavuori N135ᴾ<<locked>>100%33,388 psi63%2067 fps95.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%36,318 psi69%2001 fps97.7%
Accurate 2015<<locked>>90%31,241 psi59%1985 fps95.2%
Accurate 2460<<locked>>98%43,221 psi82%2205 fps95.1%
Accurate 2495<<locked>>98%28,950 psi55%2024 fps95%
Accurate LT-30<<locked>>86%37,608 psi71%2008 fps95.3%
ADI AR 2207<<locked>>80%32,285 psi61%1995 fps99.7%
ADI AR 221921.6 gr90%38,508 psi73%2133 fps95.2%
Alliant AR-Comp<<locked>>86%26,484 psi50%1916 fps95.4%
Alliant Reloder-10x17.6 gr80%27,456 psi52%1906 fps95.1%
Alliant Reloder-7<<locked>>80%34,084 psi64%1988 fps97.8%
Baschieri & Pellagri 106<<locked>>88%37,115 psi70%2031 fps95.5%
Hodgdon H322<<locked>>94%40,016 psi76%2159 fps95.7%
Hodgdon H335<<locked>>96%42,917 psi81%2211 fps95.2%
Hodgdon H4198<<locked>>84%38,827 psi73%2034 fps95%
Hodgdon TrailBoss<<locked>>80%23,554 psi44%1181 fps100%
IMR 4198<<locked>>80%29,660 psi56%1903 fps96.7%
IMR 4227<<locked>>80%39,102 psi74%2034 fps99.8%
Lovex S053<<locked>>80%38,841 psi73%2014 fps100%
Norma 20018.2 gr80%31,053 psi59%1972 fps97.3%
ReloadSwiss RS 14<<locked>>80%23,308 psi44%1211 fps100%
ReloadSwiss RS 36<<locked>>80%38,522 psi73%2060 fps99.7%
SNPE Vectan BA6 1/2<<locked>>80%36,695 psi69%1870 fps100%
SNPE Vectan SP 10<<locked>>94%43,671 psi82%2224 fps95.5%
SNPE Vectan SP 3<<locked>>88%35,172 psi66%2047 fps95.4%
Vihtavuori N120<<locked>>80%32,474 psi61%1969 fps100%
Vihtavuori N130<<locked>>82%28,442 psi54%1880 fps95%
Vihtavuori N133<<locked>>92%32,721 psi62%1975 fps95.2%
Vihtavuori N135<<locked>>98%31,763 psi60%2031 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 28 powders for 7 x 50 R loaded with the .284 | 140gr | Barnes X S. Hodgdon H322 delivers the highest muzzle velocity at 2,280 fps; across all powders the maximum-charge window runs from 1,319 fps to 2,280 fps. Accurate 2015 gives the best case fill at 100 %, and 28 of the 28 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.284" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, Accurate 2495 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, Norma 200, Alliant Reloder-10x rank at the top here: for 7 x 50 R with the .284 | 140gr | Barnes X S they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data