Load data for 7 x 50 R + .284 | 136gr | Peregrine VLR-5

7 x 50 R cartridge drawing
Peregrine logo

Load Specifications

Bullet Manufacturer:Peregrine
Bullet Weight:136 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:9.5

Load data in caliber 7 x 50 R with .284 | 136gr | Peregrine VLR-5 bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-7, ADI AR 2207 and ReloadSwiss RS 36.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%46,253 psi87%2201 fps99.1%
Accurate 2015ᴾ<<locked>>100%34,258 psi65%2106 fps95.9%
Accurate LT-30<<locked>>98%47,181 psi89%2198 fps97.1%
ADI AR 2205<<locked>>84%47,108 psi89%2113 fps100%
ADI AR 2207<<locked>>98%46,717 psi88%2280 fps100%
ADI AR 2219ᴾ<<locked>>100%46,209 psi87%2303 fps96.7%
Alliant AR-Compᴾ<<locked>>100%32,793 psi62%2123 fps97.7%
Alliant Reloder-10xᴾ<<locked>>100%40,466 psi76%2224 fps98.6%
Alliant Reloder-7<<locked>>96%46,572 psi88%2247 fps99.5%
Baschieri & Pellagri 106ᴾ<<locked>>100%47,442 psi90%2231 fps97.5%
Hodgdon H4198<<locked>>94%46,296 psi87%2198 fps96.4%
Hodgdon TrailBossᴾ<<locked>>100%29,544 psi56%1329 fps100%
IMR 4198ᴾ<<locked>>100%44,657 psi84%2224 fps99.6%
IMR 4227<<locked>>90%46,485 psi88%2192 fps100%
Lovex D060<<locked>>84%47,413 psi90%2224 fps99.7%
Lovex S053<<locked>>92%47,050 psi89%2185 fps100%
Norma 200ᴾ<<locked>>100%45,934 psi87%2290 fps99.7%
ReloadSwiss RS 14ᴾ<<locked>>100%28,718 psi54%1355 fps100%
ReloadSwiss RS 36<<locked>>92%47,848 psi90%2251 fps100%
Shooters World Buffalo Rifle<<locked>>84%47,413 psi90%2224 fps99.7%
Shooters World SOCOM<<locked>>84%47,630 psi90%2201 fps99.9%
SNPE Vectan BA6 1/2<<locked>>94%45,992 psi87%2047 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%42,786 psi81%2228 fps97.1%
Vihtavuori N110<<locked>>86%46,963 psi89%2116 fps100%
Vihtavuori N120<<locked>>98%47,007 psi89%2244 fps100%
Vihtavuori N130ᴾ<<locked>>100%39,885 psi75%2152 fps98.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%31,314 psi59%1962 fps95.9%
Accurate 2015<<locked>>98%32,358 psi61%2070 fps95.3%
Accurate LT-30<<locked>>92%38,914 psi74%2077 fps95.2%
ADI AR 2205<<locked>>80%42,105 psi80%2047 fps100%
ADI AR 220717.1 gr80%26,774 psi51%1942 fps98.4%
ADI AR 2219<<locked>>96%40,147 psi76%2208 fps95.1%
Alliant AR-Comp<<locked>>94%27,427 psi52%1998 fps95.4%
Alliant Reloder-10x<<locked>>88%28,166 psi53%1991 fps95.1%
Alliant Reloder-717.7 gr80%28,456 psi54%1936 fps95.7%
Baschieri & Pellagri 106<<locked>>94%38,986 psi74%2110 fps95.6%
Hodgdon H4198<<locked>>90%40,857 psi77%2116 fps95.1%
Hodgdon TrailBoss<<locked>>80%21,698 psi41%1188 fps100%
IMR 4198<<locked>>82%26,760 psi51%1890 fps95%
IMR 4227<<locked>>80%34,243 psi65%2001 fps99%
Lovex D060<<locked>>80%42,409 psi80%2149 fps99.2%
Lovex S053<<locked>>80%33,460 psi63%1985 fps100%
Norma 200<<locked>>82%25,875 psi49%1932 fps95.1%
ReloadSwiss RS 14<<locked>>80%21,176 psi40%1214 fps100%
ReloadSwiss RS 3617.8 gr80%33,214 psi63%2024 fps98.7%
Shooters World Buffalo Rifle<<locked>>80%42,409 psi80%2149 fps99.2%
Shooters World SOCOM<<locked>>80%42,047 psi79%2126 fps99.5%
SNPE Vectan BA6 1/2<<locked>>80%31,647 psi60%1850 fps100%
SNPE Vectan SP 3<<locked>>94%35,650 psi67%2106 fps95.1%
Vihtavuori N110<<locked>>80%39,204 psi74%2018 fps100%
Vihtavuori N120<<locked>>80%27,137 psi51%1923 fps99.2%
Vihtavuori N130<<locked>>90%29,254 psi55%1962 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 43 powders for 7 x 50 R loaded with the .284 | 136gr | Peregrine VLR-5. ADI AR 2219 delivers the highest muzzle velocity at 2,303 fps; across all powders the maximum-charge window runs from 1,329 fps to 2,303 fps. Accurate 2015 gives the best case fill at 100 %, and 43 of the 43 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 43–90 %, leaving at least 10 % headroom. The 136.0 gr projectile in 0.284" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, Accurate 2495 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-7, ADI AR 2207, ReloadSwiss RS 36 rank at the top here: for 7 x 50 R with the .284 | 136gr | Peregrine VLR-5 they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2460, Accurate 2495, Hodgdon CFE BLK burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data