Load data for 7 x 50 R + .284 | 133gr | MRR Green Hunting

7 x 50 R cartridge drawing
MRR logo

Load Specifications

Bullet Manufacturer:MRR
Bullet Weight:133 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:12.0

Load data in caliber 7 x 50 R with .284 | 133gr | MRR Green Hunting bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, Norma 200 and ADI AR 2207.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>90%47,340 psi89%2283 fps99.5%
Accurate 2015ᴾ<<locked>>100%38,725 psi73%2241 fps97.5%
Accurate LT-30<<locked>>96%47,659 psi90%2274 fps97.7%
ADI AR 2205<<locked>>82%47,630 psi90%2182 fps100%
ADI AR 2207<<locked>>94%45,818 psi87%2329 fps100%
ADI AR 2219<<locked>>98%47,224 psi89%2392 fps97.5%
Alliant AR-Compᴾ<<locked>>100%36,289 psi69%2260 fps99%
Alliant Reloder-10xᴾ<<locked>>100%45,295 psi86%2356 fps99.5%
Alliant Reloder-7<<locked>>92%45,498 psi86%2297 fps99.6%
Baschieri & Pellagri 106<<locked>>96%45,252 psi85%2267 fps97.5%
Hodgdon H322ᴾ<<locked>>100%45,455 psi86%2362 fps97.1%
Hodgdon H335ᴾ<<locked>>100%46,166 psi87%2379 fps96.1%
Hodgdon H4198<<locked>>92%47,123 psi89%2280 fps97.1%
Hodgdon TrailBossᴾ<<locked>>100%30,501 psi58%1388 fps100%
IMR 4198<<locked>>98%45,716 psi86%2310 fps99.8%
IMR 4227<<locked>>88%47,645 psi90%2270 fps100%
Lovex S053<<locked>>88%46,079 psi87%2234 fps100%
Norma 200<<locked>>96%45,585 psi86%2346 fps99.8%
ReloadSwiss RS 14ᴾ<<locked>>100%30,327 psi57%1424 fps100%
ReloadSwiss RS 36<<locked>>88%46,267 psi87%2293 fps100%
SNPE Vectan BA6 1/2<<locked>>92%47,094 psi89%2116 fps100%
SNPE Vectan SP 10<<locked>>98%47,210 psi89%2395 fps96.4%
SNPE Vectan SP 3ᴾ<<locked>>100%47,094 psi89%2362 fps98.3%
Vihtavuori N110<<locked>>82%45,542 psi86%2156 fps100%
Vihtavuori N120<<locked>>94%45,992 psi87%2290 fps100%
Vihtavuori N130ᴾ<<locked>>100%44,222 psi84%2280 fps99.1%
Vihtavuori N133ᴾ<<locked>>100%38,377 psi72%2192 fps97.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%34,214 psi65%2073 fps97.3%
Accurate 2015<<locked>>94%32,285 psi61%2119 fps95.7%
Accurate LT-30<<locked>>88%37,637 psi71%2116 fps95.4%
ADI AR 2205<<locked>>80%45,281 psi86%2152 fps100%
ADI AR 220718.6 gr80%29,631 psi56%2054 fps99.3%
ADI AR 221923.7 gr92%39,088 psi74%2257 fps95.5%
Alliant AR-Comp<<locked>>90%26,992 psi51%2044 fps95.8%
Alliant Reloder-10x<<locked>>84%28,050 psi53%2037 fps95.5%
Alliant Reloder-7<<locked>>80%31,575 psi60%2054 fps97.2%
Baschieri & Pellagri 106<<locked>>88%35,331 psi67%2106 fps95%
Hodgdon H322<<locked>>94%37,637 psi71%2231 fps95%
Hodgdon H335<<locked>>98%43,381 psi82%2336 fps95.4%
Hodgdon H4198<<locked>>86%39,088 psi74%2152 fps95.1%
Hodgdon TrailBoss<<locked>>80%22,292 psi42%1234 fps100%
IMR 4198<<locked>>80%27,702 psi52%1965 fps96%
IMR 4227<<locked>>80%37,159 psi70%2110 fps99.6%
Lovex S053<<locked>>80%36,608 psi69%2093 fps100%
Norma 20019.5 gr80%27,775 psi52%2021 fps96.3%
ReloadSwiss RS 14<<locked>>80%21,872 psi41%1260 fps100%
ReloadSwiss RS 36<<locked>>80%36,361 psi69%2139 fps99.5%
SNPE Vectan BA6 1/2<<locked>>80%34,606 psi65%1946 fps100%
SNPE Vectan SP 10<<locked>>96%44,411 psi84%2352 fps95.8%
SNPE Vectan SP 3<<locked>>90%34,766 psi66%2152 fps95.3%
Vihtavuori N110<<locked>>80%43,163 psi82%2123 fps100%
Vihtavuori N120<<locked>>80%29,921 psi57%2031 fps99.8%
Vihtavuori N130<<locked>>86%29,109 psi55%2008 fps95.4%
Vihtavuori N133<<locked>>94%32,256 psi61%2077 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 7 x 50 R loaded with the .284 | 133gr | MRR Green Hunting. SNPE Vectan SP 10 delivers the highest muzzle velocity at 2,395 fps; across all powders the maximum-charge window runs from 1,388 fps to 2,395 fps. Accurate 2015 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 57–90 %, leaving at least 10 % headroom. The 133.0 gr projectile in 0.284" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Alliant AR-Comp, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, Norma 200, ADI AR 2207 rank at the top here: for 7 x 50 R with the .284 | 133gr | MRR Green Hunting they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data