Load data for 7 x 50 R + .284 | 130gr | Fox Classic Hunter

7 x 50 R cartridge drawing
Fox Bullets logo

Load Specifications

Bullet Manufacturer:Fox Bullets
Bullet Weight:130 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:10.5

Load data in caliber 7 x 50 R with .284 | 130gr | Fox Classic Hunter bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-7, ADI AR 2207 and ReloadSwiss RS 36.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%46,195 psi87%2274 fps99%
Accurate 2015ᴾ<<locked>>100%34,737 psi66%2182 fps95.8%
Accurate LT-30<<locked>>98%47,181 psi89%2270 fps97%
ADI AR 2205<<locked>>84%47,355 psi89%2188 fps100%
ADI AR 2207<<locked>>98%46,891 psi89%2359 fps100%
ADI AR 2219ᴾ<<locked>>100%46,267 psi87%2375 fps96.5%
Alliant AR-Compᴾ<<locked>>100%32,750 psi62%2188 fps97.4%
Alliant Reloder-10xᴾ<<locked>>100%41,089 psi78%2303 fps98.5%
Alliant Reloder-7<<locked>>96%46,630 psi88%2323 fps99.5%
Baschieri & Pellagri 106ᴾ<<locked>>100%47,297 psi89%2300 fps97.3%
Hodgdon H4198<<locked>>94%45,890 psi87%2264 fps96.1%
Hodgdon TrailBossᴾ<<locked>>100%29,399 psi56%1375 fps100%
IMR 4198ᴾ<<locked>>100%44,367 psi84%2293 fps99.4%
IMR 4227<<locked>>90%46,601 psi88%2267 fps100%
Lovex D060<<locked>>84%47,718 psi90%2300 fps99.6%
Lovex S053<<locked>>92%47,166 psi89%2260 fps100%
Norma 200ᴾ<<locked>>100%46,398 psi88%2372 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%29,066 psi55%1411 fps100%
ReloadSwiss RS 36<<locked>>90%45,092 psi85%2287 fps99.9%
Shooters World Buffalo Rifle<<locked>>84%47,718 psi90%2300 fps99.6%
Shooters World SOCOM<<locked>>82%44,947 psi85%2241 fps99.7%
SNPE Vectan BA6 1/2<<locked>>94%46,340 psi88%2123 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%42,772 psi81%2300 fps96.9%
Vihtavuori N110<<locked>>86%46,992 psi89%2188 fps100%
Vihtavuori N120<<locked>>98%47,210 psi89%2320 fps100%
Vihtavuori N130ᴾ<<locked>>100%39,885 psi75%2224 fps97.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%31,372 psi59%2024 fps95.7%
Accurate 2015<<locked>>98%32,416 psi61%2136 fps95%
Accurate LT-30<<locked>>92%39,218 psi74%2149 fps95.1%
ADI AR 2205<<locked>>80%41,974 psi79%2116 fps100%
ADI AR 220717.8 gr80%26,716 psi50%2005 fps98.2%
ADI AR 2219<<locked>>96%40,480 psi76%2283 fps95%
Alliant AR-Comp<<locked>>96%29,080 psi55%2103 fps95.9%
Alliant Reloder-10x<<locked>>90%29,820 psi56%2093 fps95.5%
Alliant Reloder-718.4 gr80%28,297 psi53%1995 fps95.3%
Baschieri & Pellagri 106<<locked>>94%39,204 psi74%2178 fps95.4%
Hodgdon H4198<<locked>>92%43,569 psi82%2228 fps95.5%
Hodgdon TrailBoss<<locked>>80%21,393 psi40%1227 fps100%
IMR 4198<<locked>>84%28,253 psi53%1985 fps95.4%
IMR 4227<<locked>>80%34,301 psi65%2070 fps98.9%
Lovex D060<<locked>>80%42,337 psi80%2218 fps99.1%
Lovex S053<<locked>>80%33,547 psi63%2054 fps100%
Norma 200<<locked>>84%27,905 psi53%2044 fps95.7%
ReloadSwiss RS 14<<locked>>80%20,871 psi39%1253 fps100%
ReloadSwiss RS 3618.5 gr80%32,996 psi62%2087 fps98.5%
Shooters World Buffalo Rifle<<locked>>80%42,337 psi80%2218 fps99.1%
Shooters World SOCOM<<locked>>80%42,047 psi79%2195 fps99.4%
SNPE Vectan BA6 1/2<<locked>>80%31,517 psi60%1913 fps100%
SNPE Vectan SP 3<<locked>>96%37,898 psi72%2218 fps95.5%
Vihtavuori N110<<locked>>80%39,450 psi75%2090 fps100%
Vihtavuori N120<<locked>>80%27,108 psi51%1985 fps99.1%
Vihtavuori N130<<locked>>92%31,241 psi59%2067 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 41 powders for 7 x 50 R loaded with the .284 | 130gr | Fox Classic Hunter. ADI AR 2219 delivers the highest muzzle velocity at 2,375 fps; across all powders the maximum-charge window runs from 1,375 fps to 2,375 fps. Accurate 2015 gives the best case fill at 100 %, and 41 of the 41 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 52–90 %, leaving at least 10 % headroom. The 130.0 gr projectile in 0.284" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, ADI AR 2219 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-7, ADI AR 2207, ReloadSwiss RS 36 rank at the top here: for 7 x 50 R with the .284 | 130gr | Fox Classic Hunter they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2460, Accurate LT-32, Hodgdon CFE BLK burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data