Load data for 7 x 50 R + .284 | 128gr | Brenneke TIG nature

7 x 50 R cartridge drawing
Brenneke logo

Load Specifications

Bullet Manufacturer:Brenneke
Bullet Weight:128 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:10.0

Load data in caliber 7 x 50 R with .284 | 128gr | Brenneke TIG nature bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, Norma 200 and ReloadSwiss RS 36.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%47,195 psi89%2303 fps99%
Accurate 2015ᴾ<<locked>>100%35,520 psi67%2208 fps95.8%
Accurate LT-30<<locked>>98%47,485 psi90%2290 fps96.9%
ADI AR 2205<<locked>>82%45,353 psi86%2178 fps100%
ADI AR 2207<<locked>>96%44,962 psi85%2349 fps100%
ADI AR 2219ᴾ<<locked>>100%47,268 psi89%2408 fps96.5%
Alliant AR-Compᴾ<<locked>>100%33,750 psi64%2224 fps97.6%
Alliant Reloder-10xᴾ<<locked>>100%41,669 psi79%2329 fps98.5%
Alliant Reloder-7<<locked>>96%47,906 psi90%2356 fps99.5%
Baschieri & Pellagri 106<<locked>>98%45,252 psi85%2287 fps96.7%
Hodgdon H4198<<locked>>94%46,862 psi89%2293 fps96.1%
Hodgdon TrailBossᴾ<<locked>>100%30,008 psi57%1394 fps100%
IMR 4198ᴾ<<locked>>100%45,310 psi86%2326 fps99.5%
IMR 4227<<locked>>90%47,674 psi90%2297 fps100%
Lovex D060<<locked>>82%45,672 psi86%2287 fps99.4%
Lovex S053<<locked>>90%45,890 psi87%2260 fps100%
Norma 200ᴾ<<locked>>100%47,776 psi90%2405 fps99.7%
ReloadSwiss RS 14ᴾ<<locked>>100%29,283 psi55%1421 fps100%
ReloadSwiss RS 36<<locked>>90%46,195 psi87%2320 fps99.9%
Shooters World Buffalo Rifle<<locked>>82%45,672 psi86%2287 fps99.4%
Shooters World SOCOM<<locked>>82%45,368 psi86%2260 fps99.7%
SNPE Vectan BA6 1/2<<locked>>94%46,905 psi89%2146 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%43,729 psi83%2329 fps96.9%
Vihtavuori N110<<locked>>84%45,716 psi86%2188 fps100%
Vihtavuori N120<<locked>>96%45,150 psi85%2313 fps100%
Vihtavuori N130ᴾ<<locked>>100%40,959 psi77%2254 fps98%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%31,966 psi60%2047 fps95.7%
Accurate 2015<<locked>>98%33,620 psi64%2172 fps95.2%
Accurate LT-30<<locked>>92%39,668 psi75%2169 fps95%
ADI AR 2205<<locked>>80%42,438 psi80%2139 fps100%
ADI AR 220717.9 gr80%27,485 psi52%2031 fps98.2%
ADI AR 2219<<locked>>96%41,408 psi78%2313 fps95.1%
Alliant AR-Comp<<locked>>94%28,210 psi53%2090 fps95.2%
Alliant Reloder-10x<<locked>>90%30,980 psi59%2129 fps95.8%
Alliant Reloder-7<<locked>>80%29,530 psi56%2031 fps95.6%
Baschieri & Pellagri 106<<locked>>94%39,987 psi76%2205 fps95.4%
Hodgdon H4198<<locked>>92%43,961 psi83%2251 fps95.5%
Hodgdon TrailBoss<<locked>>80%22,060 psi42%1247 fps100%
IMR 4198<<locked>>84%29,240 psi55%2021 fps95.7%
IMR 4227<<locked>>80%35,389 psi67%2103 fps99%
Lovex D060<<locked>>80%42,815 psi81%2241 fps99%
Lovex S053<<locked>>80%34,301 psi65%2080 fps100%
Norma 20019.2 gr82%27,079 psi51%2031 fps95.1%
ReloadSwiss RS 14<<locked>>80%21,625 psi41%1273 fps100%
ReloadSwiss RS 3618.7 gr80%34,185 psi65%2123 fps98.6%
Shooters World Buffalo Rifle<<locked>>80%42,815 psi81%2241 fps99%
Shooters World SOCOM<<locked>>80%42,467 psi80%2218 fps99.4%
SNPE Vectan BA6 1/2<<locked>>80%32,242 psi61%1936 fps100%
SNPE Vectan SP 3<<locked>>96%38,943 psi74%2247 fps95.7%
Vihtavuori N110<<locked>>80%40,263 psi76%2116 fps100%
Vihtavuori N120<<locked>>80%27,847 psi53%2011 fps99.2%
Vihtavuori N130<<locked>>92%32,343 psi61%2100 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 42 powders for 7 x 50 R loaded with the .284 | 128gr | Brenneke TIG nature. ADI AR 2219 delivers the highest muzzle velocity at 2,408 fps; across all powders the maximum-charge window runs from 1,394 fps to 2,408 fps. Accurate 2015 gives the best case fill at 100 %, and 42 of the 42 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 46–90 %, leaving at least 10 % headroom. The 128.0 gr projectile in 0.284" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, Accurate 2495 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, Norma 200, ReloadSwiss RS 36 rank at the top here: for 7 x 50 R with the .284 | 128gr | Brenneke TIG nature they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2460, Accurate 2495, Accurate LT-32 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data