Load data for 7 x 50 R + .284 | 123gr | RWS Kegelspitz

7 x 50 R cartridge drawing
RWS logo

Load Specifications

Bullet Manufacturer:RWS
Bullet Weight:123 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:14.5

Load data in caliber 7 x 50 R with .284 | 123gr | RWS Kegelspitz bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, Norma 200 and Alliant Reloder-7.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>88%45,672 psi86%2405 fps99.3%
Accurate 2015ᴾ<<locked>>100%40,596 psi77%2408 fps97.8%
Accurate LT-30<<locked>>94%46,615 psi88%2405 fps97.5%
ADI AR 2207<<locked>>94%47,297 psi89%2497 fps100%
ADI AR 2219<<locked>>96%45,759 psi86%2516 fps97.1%
Alliant AR-Compᴾ<<locked>>100%37,855 psi72%2431 fps99.2%
Alliant Reloder-10xᴾ<<locked>>100%47,050 psi89%2530 fps99.6%
Alliant Reloder-7<<locked>>92%46,630 psi88%2457 fps99.7%
Baschieri & Pellagri 106<<locked>>96%47,166 psi89%2438 fps97.9%
Hodgdon H322ᴾ<<locked>>100%46,847 psi88%2533 fps97.3%
Hodgdon H335<<locked>>98%45,136 psi85%2510 fps95.8%
Hodgdon H4198<<locked>>90%45,614 psi86%2402 fps96.7%
Hodgdon TrailBossᴾ<<locked>>100%30,748 psi58%1493 fps100%
IMR 4198<<locked>>98%46,963 psi89%2474 fps99.9%
IMR 4227<<locked>>86%45,963 psi87%2395 fps100%
Lovex S053<<locked>>88%47,413 psi90%2395 fps100%
Norma 200<<locked>>96%47,456 psi90%2520 fps99.9%
ReloadSwiss RS 14ᴾ<<locked>>100%30,487 psi58%1529 fps100%
ReloadSwiss RS 36<<locked>>86%45,237 psi85%2425 fps100%
SNPE Vectan BA6 1/2<<locked>>90%46,151 psi87%2241 fps100%
SNPE Vectan SP 10<<locked>>96%45,992 psi87%2523 fps96.1%
SNPE Vectan SP 3<<locked>>98%45,934 psi87%2490 fps98.1%
Vihtavuori N110<<locked>>82%46,949 psi89%2313 fps100%
Vihtavuori N120<<locked>>94%47,456 psi90%2454 fps100%
Vihtavuori N130ᴾ<<locked>>100%45,716 psi86%2448 fps99.2%
Vihtavuori N133ᴾ<<locked>>100%39,639 psi75%2352 fps97.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%35,215 psi67%2221 fps97.4%
Accurate 2015<<locked>>92%31,720 psi60%2238 fps95.3%
Accurate LT-30<<locked>>88%38,943 psi74%2277 fps95.7%
ADI AR 2207<<locked>>80%30,763 psi58%2205 fps99.4%
ADI AR 221926.2 gr92%40,335 psi76%2421 fps95.8%
Alliant AR-Comp<<locked>>88%26,353 psi50%2152 fps95.2%
Alliant Reloder-10x<<locked>>84%29,037 psi55%2185 fps95.7%
Alliant Reloder-721.3 gr80%32,358 psi61%2198 fps97.3%
Baschieri & Pellagri 106<<locked>>88%36,448 psi69%2260 fps95.3%
Hodgdon H322<<locked>>94%39,001 psi74%2398 fps95.4%
Hodgdon H335<<locked>>96%42,163 psi80%2457 fps95%
Hodgdon H4198<<locked>>86%40,263 psi76%2310 fps95.4%
Hodgdon TrailBoss<<locked>>80%22,408 psi42%1325 fps100%
IMR 4198<<locked>>80%28,427 psi54%2106 fps96.1%
IMR 4227<<locked>>80%38,421 psi73%2270 fps99.7%
Lovex S053<<locked>>80%37,623 psi71%2244 fps100%
Norma 20021.6 gr80%28,877 psi55%2169 fps96.5%
ReloadSwiss RS 14<<locked>>80%22,350 psi42%1365 fps100%
ReloadSwiss RS 36<<locked>>80%37,681 psi71%2297 fps99.6%
SNPE Vectan BA6 1/2<<locked>>80%35,273 psi67%2083 fps100%
SNPE Vectan SP 10<<locked>>94%43,004 psi81%2474 fps95.3%
SNPE Vectan SP 3<<locked>>90%36,071 psi68%2313 fps95.7%
Vihtavuori N110<<locked>>80%44,179 psi83%2277 fps100%
Vihtavuori N120<<locked>>80%31,009 psi59%2182 fps99.9%
Vihtavuori N130<<locked>>86%29,907 psi56%2152 fps95.6%
Vihtavuori N133<<locked>>94%33,127 psi63%2224 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 51 powders for 7 x 50 R loaded with the .284 | 123gr | RWS Kegelspitz. Alliant Power Pro 1200-R delivers the highest muzzle velocity at 2,572 fps; across all powders the maximum-charge window runs from 1,493 fps to 2,572 fps. Accurate 2015 gives the best case fill at 100 %, and 51 of the 51 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. The 123.0 gr projectile in 0.284" calls for a 1:14.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, Accurate 2495 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, Norma 200, Alliant Reloder-7 rank at the top here: for 7 x 50 R with the .284 | 123gr | RWS Kegelspitz they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2495, Accurate 2520, ADI Benchmark 8208 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data