Load data for 7 x 50 R + .284 | 120gr | Barnes X BT

7 x 50 R cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:120 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):1.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:11.5

Load data in caliber 7 x 50 R with .284 | 120gr | Barnes X BT bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Norma 200, ADI AR 2207 and Alliant Reloder-7.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>90%47,485 psi90%2395 fps98.8%
Accurate 2015ᴾ<<locked>>100%39,798 psi75%2359 fps96.6%
Accurate LT-30<<locked>>94%45,440 psi86%2346 fps96.1%
ADI AR 2207<<locked>>94%46,006 psi87%2451 fps100%
ADI AR 2219<<locked>>98%47,384 psi90%2500 fps96.2%
Alliant AR-Compᴾ<<locked>>100%37,217 psi70%2372 fps98.2%
Alliant Reloder-10xᴾ<<locked>>100%46,021 psi87%2480 fps98.9%
Alliant Reloder-7<<locked>>92%46,050 psi87%2411 fps99.1%
Baschieri & Pellagri 106<<locked>>96%45,324 psi86%2375 fps96.4%
Hodgdon H322ᴾ<<locked>>100%45,745 psi86%2474 fps95.8%
Hodgdon H4198<<locked>>92%47,253 psi89%2388 fps95.9%
Hodgdon TrailBossᴾ<<locked>>100%31,169 psi59%1470 fps100%
IMR 4198<<locked>>98%45,788 psi86%2421 fps99.4%
IMR 4227<<locked>>88%47,340 psi89%2382 fps99.9%
Lovex D060<<locked>>82%47,819 psi90%2415 fps99.4%
Lovex S053<<locked>>88%46,296 psi87%2352 fps100%
Norma 200<<locked>>96%46,441 psi88%2467 fps99.4%
ReloadSwiss RS 14ᴾ<<locked>>100%31,111 psi59%1509 fps100%
ReloadSwiss RS 36<<locked>>88%46,543 psi88%2411 fps99.9%
Shooters World Buffalo Rifle<<locked>>82%47,819 psi90%2415 fps99.4%
SNPE Vectan BA6 1/2<<locked>>92%47,311 psi89%2234 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%46,891 psi89%2467 fps97.2%
Vihtavuori N110<<locked>>82%46,340 psi88%2280 fps100%
Vihtavuori N120<<locked>>94%46,180 psi87%2411 fps100%
Vihtavuori N130ᴾ<<locked>>100%44,396 psi84%2392 fps98.3%
Vihtavuori N133ᴾ<<locked>>100%38,754 psi73%2293 fps95.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%35,172 psi66%2182 fps96.3%
Accurate 2015<<locked>>96%35,389 psi67%2274 fps95.3%
Accurate LT-30<<locked>>92%42,873 psi81%2306 fps95.5%
ADI AR 220719.1 gr80%31,009 psi59%2175 fps98.8%
ADI AR 2219<<locked>>96%44,686 psi84%2457 fps95.5%
Alliant AR-Comp<<locked>>92%29,849 psi56%2198 fps95.4%
Alliant Reloder-10x<<locked>>86%30,879 psi58%2192 fps95.1%
Alliant Reloder-719.7 gr80%32,692 psi62%2165 fps96.3%
Baschieri & Pellagri 106<<locked>>92%40,248 psi76%2290 fps95.1%
Hodgdon H322<<locked>>98%43,178 psi82%2428 fps95.1%
Hodgdon H4198<<locked>>90%44,541 psi84%2346 fps95.2%
Hodgdon TrailBoss<<locked>>80%23,264 psi44%1316 fps100%
IMR 4198<<locked>>82%29,979 psi57%2103 fps95.5%
IMR 4227<<locked>>80%38,101 psi72%2231 fps99.2%
Lovex D060<<locked>>80%45,629 psi86%2379 fps99.2%
Lovex S053<<locked>>80%37,536 psi71%2211 fps100%
Norma 20020 gr80%29,834 psi56%2146 fps95.6%
ReloadSwiss RS 14<<locked>>80%22,960 psi43%1345 fps100%
ReloadSwiss RS 36<<locked>>80%36,970 psi70%2247 fps98.9%
Shooters World Buffalo Rifle<<locked>>80%45,629 psi86%2379 fps99.2%
SNPE Vectan BA6 1/2<<locked>>80%35,186 psi66%2054 fps100%
SNPE Vectan SP 3<<locked>>94%39,914 psi75%2346 fps95.5%
Vihtavuori N110<<locked>>80%44,063 psi83%2247 fps100%
Vihtavuori N120<<locked>>80%31,285 psi59%2152 fps99.5%
Vihtavuori N130<<locked>>88%31,821 psi60%2156 fps95%
Vihtavuori N133<<locked>>98%36,593 psi69%2254 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 42 powders for 7 x 50 R loaded with the .284 | 120gr | Barnes X BT. SNPE Vectan SP 10 delivers the highest muzzle velocity at 2,503 fps; across all powders the maximum-charge window runs from 1,470 fps to 2,503 fps. Accurate 2015 gives the best case fill at 100 %, and 42 of the 42 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. The 120.0 gr projectile in 0.284" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, Accurate 2495 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Norma 200, ADI AR 2207, Alliant Reloder-7 rank at the top here: for 7 x 50 R with the .284 | 120gr | Barnes X BT they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2460, Accurate 2495, Accurate LT-32 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data