Load data for 7 x 44 Penna + .277 | 90gr | Speer TNT HP

7 x 44 Penna cartridge drawing
Speer logo

Load Specifications

Bullet Manufacturer:Speer
Bullet Weight:90 gr
Bullet Diameter:0.277"
Bullet Length:<<locked>>
Case Length (l3):1.75"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:32.7 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:63,817 psi
Recommended Twist Rate:1:15.0

Load data in caliber 7 x 44 Penna with .277 | 90gr | Speer TNT HP bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Shooters World Buffalo Rifle, Lovex D060 and Accurate 5744.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>98%54,665 psi86%2844 fps98.8%
Accurate 5744<<locked>>88%55,158 psi86%2887 fps99.5%
Accurate No. 11 FS<<locked>>88%57,319 psi90%2864 fps100%
ADI APS 450<<locked>>84%56,144 psi88%2149 fps100%
ADI AR 2205<<locked>>90%55,376 psi87%2756 fps100%
ADI AR 2207ᴾ<<locked>>100%47,659 psi75%2844 fps100%
Alliant Reloder-10xᴾ<<locked>>100%39,479 psi62%2720 fps96.5%
Alliant Reloder-7ᴾ<<locked>>100%51,024 psi80%2848 fps99%
Hodgdon LilGun<<locked>>82%56,086 psi88%2858 fps100%
Hodgdon TrailBossᴾ<<locked>>100%29,356 psi46%1686 fps100%
IMR 4198ᴾ<<locked>>100%42,975 psi67%2720 fps98%
IMR 4227<<locked>>98%56,782 psi89%2877 fps100%
Lovex D060<<locked>>90%55,158 psi86%2887 fps99.5%
Lovex D063<<locked>>90%56,101 psi88%2858 fps99.8%
Lovex S040<<locked>>84%56,536 psi89%2749 fps100%
Lovex S053ᴾ<<locked>>100%57,101 psi89%2867 fps100%
Norma 200ᴾ<<locked>>100%44,817 psi70%2805 fps98.4%
ReloadSwiss RS 14ᴾ<<locked>>100%28,935 psi45%1729 fps100%
ReloadSwiss RS 36<<locked>>98%55,666 psi87%2907 fps100%
Shooters World Blackout<<locked>>86%54,882 psi86%2861 fps99.5%
Shooters World Buffalo Rifle<<locked>>90%55,158 psi86%2887 fps99.5%
Shooters World SOCOM<<locked>>90%56,101 psi88%2858 fps99.8%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%51,851 psi81%2648 fps100%
Vihtavuori N110<<locked>>94%57,159 psi90%2789 fps100%
Vihtavuori N120ᴾ<<locked>>100%47,935 psi75%2802 fps100%
Vihtavuori N130ᴾ<<locked>>100%38,450 psi60%2625 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%36,767 psi58%2539 fps95.3%
Accurate 574420.2 gr80%43,555 psi68%2690 fps98%
Accurate No. 11 FS<<locked>>80%44,614 psi70%2680 fps99.9%
ADI APS 450<<locked>>80%52,620 psi82%2100 fps100%
ADI AR 2205<<locked>>80%41,118 psi64%2539 fps100%
ADI AR 2207<<locked>>80%25,933 psi41%2372 fps95.8%
Alliant Reloder-10x<<locked>>96%34,867 psi55%2621 fps95.1%
Alliant Reloder-7<<locked>>86%33,170 psi52%2507 fps95%
Hodgdon LilGun<<locked>>80%52,069 psi82%2808 fps100%
Hodgdon TrailBoss<<locked>>80%21,350 psi33%1506 fps100%
IMR 4198<<locked>>90%32,793 psi51%2493 fps95%
IMR 4227<<locked>>80%33,330 psi52%2464 fps97.1%
Lovex D06019.7 gr80%41,031 psi64%2638 fps97.4%
Lovex D063<<locked>>80%40,495 psi63%2605 fps98%
Lovex S040<<locked>>80%50,546 psi79%2671 fps100%
Lovex S053<<locked>>80%32,416 psi51%2448 fps99.4%
Norma 200<<locked>>90%32,619 psi51%2556 fps95.2%
ReloadSwiss RS 14<<locked>>80%20,827 psi33%1535 fps100%
ReloadSwiss RS 36<<locked>>80%32,039 psi50%2477 fps96.5%
Shooters World Blackout<<locked>>80%45,194 psi71%2707 fps98.4%
Shooters World Buffalo Rifle19.7 gr80%41,031 psi64%2638 fps97.4%
Shooters World SOCOM<<locked>>80%40,495 psi63%2605 fps98%
SNPE Vectan BA6 1/2<<locked>>80%30,719 psi48%2303 fps100%
Vihtavuori N110<<locked>>80%38,464 psi60%2520 fps100%
Vihtavuori N120<<locked>>80%26,266 psi41%2352 fps97.2%
Vihtavuori N130<<locked>>98%36,172 psi57%2575 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 40 powders for 7 x 44 Penna loaded with the .277 | 90gr | Speer TNT HP. ReloadSwiss RS 36 delivers the highest muzzle velocity at 2,907 fps; across all powders the maximum-charge window runs from 1,686 fps to 2,907 fps. Accurate 2015 gives the best case fill at 100 %, and 40 of the 40 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (440 MPa), the top charges use 45–90 %, leaving at least 10 % headroom. The 90.0 gr projectile in 0.277" calls for a 1:15.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate LT-30, Accurate LT-32 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Shooters World Buffalo Rifle, Lovex D060, Accurate 5744 rank at the top here: for 7 x 44 Penna with the .277 | 90gr | Speer TNT HP they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2015, Accurate LT-32, ADI AR 2219 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data