Load data for 7 x 44 Penna + .277 | 100gr | Remington PSP

7 x 44 Penna cartridge drawing
Remington logo

Load Specifications

Bullet Manufacturer:Remington
Bullet Weight:100 gr
Bullet Diameter:0.277"
Bullet Length:<<locked>>
Case Length (l3):1.75"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:32.7 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:63,817 psi
Recommended Twist Rate:1:12.5

Load data in caliber 7 x 44 Penna with .277 | 100gr | Remington PSP bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Accurate 5744, Shooters World Buffalo Rifle and Lovex D060.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>98%54,679 psi86%2657 fps99.1%
Accurate 5744<<locked>>88%55,448 psi87%2697 fps99.7%
Accurate LT-30ᴾ<<locked>>100%48,356 psi76%2552 fps95.8%
Accurate No. 11 FS<<locked>>86%54,273 psi85%2635 fps100%
ADI APS 450<<locked>>84%56,579 psi89%1991 fps100%
ADI AR 2205<<locked>>90%55,201 psi87%2562 fps100%
ADI AR 2207ᴾ<<locked>>100%47,935 psi75%2661 fps100%
Alliant Reloder-10xᴾ<<locked>>100%39,262 psi62%2539 fps97%
Alliant Reloder-7ᴾ<<locked>>100%51,068 psi80%2661 fps99.2%
Hodgdon LilGun<<locked>>82%55,869 psi88%2657 fps100%
Hodgdon TrailBossᴾ<<locked>>100%29,095 psi46%1555 fps100%
IMR 4198ᴾ<<locked>>100%43,265 psi68%2546 fps98.5%
IMR 4227<<locked>>98%57,276 psi90%2687 fps100%
Lovex D060<<locked>>90%54,752 psi86%2687 fps99.6%
Lovex D063<<locked>>90%56,391 psi88%2667 fps99.9%
Lovex S040<<locked>>84%56,913 psi89%2559 fps100%
Lovex S053ᴾ<<locked>>100%57,479 psi90%2677 fps100%
Norma 200ᴾ<<locked>>100%44,933 psi70%2628 fps98.8%
ReloadSwiss RS 14ᴾ<<locked>>100%28,805 psi45%1594 fps100%
ReloadSwiss RS 36<<locked>>98%56,231 psi88%2720 fps100%
Shooters World Blackout<<locked>>86%55,245 psi87%2674 fps99.7%
Shooters World Buffalo Rifle<<locked>>90%54,752 psi86%2687 fps99.6%
Shooters World SOCOM<<locked>>90%56,391 psi88%2667 fps99.9%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%51,880 psi81%2464 fps100%
Vihtavuori N110<<locked>>94%57,682 psi90%2598 fps100%
Vihtavuori N120ᴾ<<locked>>100%48,153 psi75%2618 fps100%
Vihtavuori N130ᴾ<<locked>>100%38,769 psi61%2461 fps96.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%34,722 psi54%2333 fps95.3%
Accurate 574418.5 gr80%43,468 psi68%2507 fps98.4%
Accurate LT-30<<locked>>98%45,368 psi71%2503 fps95.1%
Accurate No. 11 FS<<locked>>80%44,701 psi70%2500 fps100%
ADI APS 450<<locked>>80%52,765 psi83%1942 fps100%
ADI AR 2205<<locked>>80%40,930 psi64%2362 fps100%
ADI AR 2207<<locked>>80%26,107 psi41%2221 fps96.6%
Alliant Reloder-10x<<locked>>96%34,780 psi55%2451 fps95.7%
Alliant Reloder-7<<locked>>86%33,228 psi52%2346 fps95.6%
Hodgdon LilGun<<locked>>80%52,141 psi82%2615 fps100%
Hodgdon TrailBoss<<locked>>80%21,379 psi34%1388 fps100%
IMR 4198<<locked>>90%32,706 psi51%2329 fps95.6%
IMR 4227<<locked>>80%33,431 psi52%2300 fps97.6%
Lovex D06018.1 gr80%41,307 psi65%2467 fps97.9%
Lovex D063<<locked>>80%40,683 psi64%2434 fps98.4%
Lovex S040<<locked>>80%50,328 psi79%2477 fps100%
Lovex S053<<locked>>80%32,358 psi51%2280 fps99.6%
Norma 200<<locked>>88%30,647 psi48%2346 fps95.2%
ReloadSwiss RS 14<<locked>>80%20,900 psi33%1417 fps100%
ReloadSwiss RS 36<<locked>>80%32,097 psi50%2313 fps97.1%
Shooters World Blackout<<locked>>80%45,411 psi71%2530 fps98.8%
Shooters World Buffalo Rifle18.1 gr80%41,307 psi65%2467 fps97.9%
Shooters World SOCOM<<locked>>80%40,683 psi64%2434 fps98.4%
SNPE Vectan BA6 1/2<<locked>>80%30,995 psi49%2146 fps100%
Vihtavuori N110<<locked>>80%38,653 psi61%2343 fps100%
Vihtavuori N120<<locked>>80%26,498 psi42%2201 fps97.9%
Vihtavuori N130<<locked>>96%34,432 psi54%2375 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 7 x 44 Penna loaded with the .277 | 100gr | Remington PSP. ReloadSwiss RS 36 delivers the highest muzzle velocity at 2,720 fps; across all powders the maximum-charge window runs from 1,555 fps to 2,720 fps. Accurate LT-30 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (440 MPa), the top charges use 45–90 %, leaving at least 10 % headroom. The 100.0 gr projectile in 0.277" calls for a 1:12.5 twist; slower twists will usually not stabilise this weight. Accurate LT-30, ADI AR 2207, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Accurate 5744, Shooters World Buffalo Rifle, Lovex D060 rank at the top here: for 7 x 44 Penna with the .277 | 100gr | Remington PSP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data