Load data for 7 x 44 Penna + .277 | 100gr | Hornady SP

7 x 44 Penna cartridge drawing
Hornady logo

Load Specifications

Bullet Manufacturer:Hornady
Bullet Weight:100 gr
Bullet Diameter:0.277"
Bullet Length:<<locked>>
Case Length (l3):1.75"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:32.7 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:63,817 psi
Recommended Twist Rate:1:11.5

Load data in caliber 7 x 44 Penna with .277 | 100gr | Hornady SP bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Shooters World Buffalo Rifle, Lovex D060 and Shooters World SOCOM.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680ᴾ<<locked>>100%57,334 psi90%2674 fps99.2%
Accurate 5744<<locked>>86%57,464 psi90%2710 fps99.7%
Accurate No. 11 FS<<locked>>88%56,275 psi88%2644 fps100%
ADI APS 450<<locked>>84%56,159 psi88%1972 fps100%
ADI AR 2205<<locked>>92%57,276 psi90%2572 fps100%
ADI AR 2207ᴾ<<locked>>100%46,383 psi73%2625 fps100%
Alliant Reloder-10xᴾ<<locked>>100%37,971 psi60%2500 fps96.4%
Alliant Reloder-7ᴾ<<locked>>100%49,690 psi78%2628 fps99%
Hodgdon H4198ᴾ<<locked>>100%52,388 psi82%2608 fps95.7%
Hodgdon LilGun<<locked>>82%54,549 psi85%2631 fps100%
Hodgdon TrailBossᴾ<<locked>>100%28,935 psi45%1539 fps100%
IMR 4198ᴾ<<locked>>100%42,032 psi66%2507 fps98%
IMR 4227<<locked>>98%55,564 psi87%2651 fps100%
Lovex D060<<locked>>92%57,464 psi90%2710 fps99.7%
Lovex D063<<locked>>88%57,479 psi90%2687 fps99.7%
Lovex S040<<locked>>84%55,593 psi87%2530 fps100%
Lovex S053ᴾ<<locked>>100%55,840 psi88%2644 fps100%
Norma 200ᴾ<<locked>>100%43,598 psi68%2592 fps98.4%
ReloadSwiss RS 14ᴾ<<locked>>100%28,631 psi45%1581 fps100%
ReloadSwiss RS 36ᴾ<<locked>>100%57,725 psi90%2723 fps100%
Shooters World Blackout<<locked>>88%57,479 psi90%2687 fps99.7%
Shooters World Buffalo Rifle<<locked>>92%57,464 psi90%2710 fps99.7%
Shooters World SOCOM<<locked>>90%54,926 psi86%2635 fps99.8%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%50,836 psi80%2438 fps100%
Vihtavuori N110<<locked>>94%56,420 psi88%2572 fps100%
Vihtavuori N120ᴾ<<locked>>100%46,688 psi73%2585 fps100%
Vihtavuori N130ᴾ<<locked>>100%37,565 psi59%2425 fps95.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%35,897 psi56%2343 fps95.4%
Accurate 5744<<locked>>80%47,863 psi75%2566 fps98.9%
Accurate No. 11 FS<<locked>>80%43,729 psi69%2470 fps99.9%
ADI APS 450<<locked>>80%52,228 psi82%1923 fps100%
ADI AR 2205<<locked>>80%40,016 psi63%2333 fps100%
ADI AR 2207<<locked>>80%25,309 psi40%2185 fps96%
Alliant Reloder-10x<<locked>>96%33,547 psi53%2408 fps95%
Alliant Reloder-7<<locked>>86%32,460 psi51%2316 fps95.1%
Hodgdon H4198<<locked>>98%49,066 psi77%2559 fps95%
Hodgdon LilGun<<locked>>80%50,952 psi80%2589 fps100%
Hodgdon TrailBoss<<locked>>80%21,524 psi34%1385 fps100%
IMR 4198<<locked>>90%31,966 psi50%2297 fps95%
IMR 4227<<locked>>80%32,880 psi52%2274 fps97.3%
Lovex D06017.6 gr80%40,263 psi63%2431 fps97.5%
Lovex D063<<locked>>80%44,454 psi70%2500 fps98.5%
Lovex S040<<locked>>80%49,719 psi78%2457 fps100%
Lovex S053<<locked>>80%31,807 psi50%2257 fps99.4%
Norma 200<<locked>>90%31,546 psi49%2356 fps95.3%
ReloadSwiss RS 14<<locked>>80%20,987 psi33%1414 fps100%
ReloadSwiss RS 36<<locked>>80%31,183 psi49%2280 fps96.6%
Shooters World Blackout<<locked>>80%44,454 psi70%2500 fps98.5%
Shooters World Buffalo Rifle17.6 gr80%40,263 psi63%2431 fps97.5%
Shooters World SOCOM19.7 gr80%39,871 psi62%2405 fps98.1%
SNPE Vectan BA6 1/2<<locked>>80%30,327 psi48%2123 fps100%
Vihtavuori N110<<locked>>80%37,333 psi59%2310 fps100%
Vihtavuori N120<<locked>>80%25,686 psi40%2169 fps97.4%
Vihtavuori N130<<locked>>98%35,172 psi55%2375 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 7 x 44 Penna loaded with the .277 | 100gr | Hornady SP. ReloadSwiss RS 36 delivers the highest muzzle velocity at 2,723 fps; across all powders the maximum-charge window runs from 1,539 fps to 2,723 fps. Accurate 1680 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (440 MPa), the top charges use 45–90 %, leaving at least 10 % headroom. The 100.0 gr projectile in 0.277" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 1680, ADI AR 2207, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Shooters World Buffalo Rifle, Lovex D060, Shooters World SOCOM rank at the top here: for 7 x 44 Penna with the .277 | 100gr | Hornady SP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data