Load data for 7-30 Waters + .284 | 100gr | Barnes X S

7-30 Waters cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:100 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.04"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:44 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:50,038 psi
Recommended Twist Rate:1:14.5

Load data in caliber 7-30 Waters with .284 | 100gr | Barnes X S bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, SNPE Vectan SP 3 and Norma 200.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%45,281 psi90%2753 fps99%
Accurate 2015<<locked>>98%44,715 psi89%2828 fps98.3%
Accurate 2495ᴾ<<locked>>100%36,463 psi73%2743 fps96.8%
Accurate LT-30<<locked>>88%43,308 psi87%2703 fps96.5%
ADI AR 2207<<locked>>86%42,525 psi85%2782 fps100%
ADI AR 2219<<locked>>90%43,033 psi86%2831 fps96.1%
Alliant AR-Compᴾ<<locked>>100%43,482 psi87%2897 fps99.7%
Alliant Reloder-10x<<locked>>94%45,121 psi90%2861 fps99.2%
Alliant Reloder-7<<locked>>86%44,614 psi89%2782 fps99.3%
Baschieri & Pellagri 106<<locked>>90%43,758 psi87%2736 fps96.9%
Hodgdon H322<<locked>>94%44,237 psi88%2854 fps96.4%
Hodgdon H4198<<locked>>86%44,788 psi90%2746 fps96.2%
Hodgdon TrailBossᴾ<<locked>>100%32,082 psi64%1775 fps100%
IMR 3031ᴾ<<locked>>100%41,582 psi83%2864 fps96.7%
IMR 4198<<locked>>92%44,251 psi88%2795 fps99.5%
IMR 4227<<locked>>82%45,252 psi90%2746 fps100%
Lovex S053<<locked>>82%44,585 psi89%2713 fps100%
Norma 200<<locked>>88%43,685 psi87%2812 fps99.4%
ReloadSwiss RS 14ᴾ<<locked>>100%31,937 psi64%1818 fps100%
ReloadSwiss RS 36<<locked>>82%44,802 psi90%2779 fps99.9%
SNPE Vectan BA6 1/2<<locked>>84%43,540 psi87%2549 fps100%
SNPE Vectan SP 3<<locked>>92%43,453 psi87%2812 fps97.3%
Somchem S335ᴾ<<locked>>100%44,744 psi89%2792 fps96.4%
Vihtavuori N120<<locked>>86%42,569 psi85%2736 fps100%
Vihtavuori N130<<locked>>94%43,584 psi87%2762 fps98.7%
Vihtavuori N133ᴾ<<locked>>100%44,686 psi89%2792 fps98.1%
Vihtavuori N135ᴾ<<locked>>100%37,478 psi75%2736 fps96.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%40,059 psi80%2654 fps98.2%
Accurate 2015<<locked>>88%33,388 psi67%2585 fps95.3%
Accurate 2495<<locked>>96%32,039 psi64%2638 fps95.3%
Accurate LT-30<<locked>>84%38,711 psi77%2608 fps95.2%
ADI AR 2207<<locked>>80%35,781 psi72%2641 fps99.8%
ADI AR 2219<<locked>>88%40,495 psi81%2776 fps95.4%
Alliant AR-Comp<<locked>>84%27,514 psi55%2487 fps95.2%
Alliant Reloder-10x25.7 gr80%30,226 psi60%2520 fps95.4%
Alliant Reloder-7<<locked>>80%37,521 psi75%2635 fps98.2%
Baschieri & Pellagri 106<<locked>>86%39,015 psi78%2641 fps95.7%
Hodgdon H322<<locked>>90%39,421 psi79%2756 fps95%
Hodgdon H4198<<locked>>84%42,496 psi85%2703 fps95.6%
Hodgdon TrailBoss<<locked>>80%23,888 psi48%1588 fps100%
IMR 3031<<locked>>96%36,796 psi74%2753 fps95.1%
IMR 4198<<locked>>80%32,242 psi64%2523 fps97.1%
IMR 4227<<locked>>80%42,728 psi85%2700 fps99.9%
Lovex S053<<locked>>80%42,279 psi84%2671 fps100%
Norma 20026.7 gr80%34,606 psi69%2615 fps97.7%
ReloadSwiss RS 14<<locked>>80%23,844 psi48%1627 fps100%
ReloadSwiss RS 36<<locked>>80%42,076 psi84%2726 fps99.8%
SNPE Vectan BA6 1/2<<locked>>80%39,349 psi79%2477 fps100%
SNPE Vectan SP 327.7 gr86%36,376 psi73%2657 fps95.2%
Somchem S335<<locked>>96%39,711 psi79%2694 fps95.1%
Vihtavuori N120<<locked>>80%35,853 psi72%2605 fps100%
Vihtavuori N130<<locked>>82%30,980 psi62%2480 fps95.3%
Vihtavuori N133<<locked>>90%33,924 psi68%2562 fps95.1%
Vihtavuori N135<<locked>>96%33,736 psi67%2648 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 7-30 Waters loaded with the .284 | 100gr | Barnes X S. Alliant AR-Comp delivers the highest muzzle velocity at 2,897 fps; across all powders the maximum-charge window runs from 1,775 fps to 2,897 fps. Accurate 2495 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (345 MPa), the top charges use 64–90 %, leaving at least 10 % headroom. The 100.0 gr projectile in 0.284" calls for a 1:14.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, SNPE Vectan SP 3, Norma 200 rank at the top here: for 7-30 Waters with the .284 | 100gr | Barnes X S they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data