Load data for 6.5 x 70 R + .264 | 159gr | RWS TMR

6.5 x 70 R cartridge drawing
RWS logo

Load Specifications

Bullet Manufacturer:RWS
Bullet Weight:159 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):2.736"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:38.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:11.5

Load data in caliber 6.5 x 70 R with .264 | 159gr | RWS TMR bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Somchem S365, Hodgdon Hybrid 100V and Winchester 6.5 StaBALL.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 4064<<locked>>82%35,491 psi87%2047 fps100%
Accurate 4350<<locked>>92%35,781 psi88%2116 fps96.8%
ADI AR 2208<<locked>>82%35,476 psi87%2018 fps97.1%
Alliant Reloder- TS 15.5<<locked>>82%34,896 psi86%2041 fps98.5%
Alliant Reloder-16<<locked>>92%36,608 psi90%2123 fps97%
Alliant Reloder-17<<locked>>88%36,521 psi90%2152 fps98.5%
Alliant Reloder-23ᴾ<<locked>>100%32,895 psi81%2083 fps97.3%
Bofors RP3<<locked>>84%36,230 psi89%2080 fps98.9%
Hodgdon H380<<locked>>82%35,201 psi87%2041 fps95.9%
Hodgdon Hybrid 100V<<locked>>94%35,476 psi87%2077 fps98.2%
Hodgdon TrailBossᴾ<<locked>>100%34,780 psi86%1342 fps100%
IMR 4831<<locked>>92%34,780 psi86%2080 fps96.5%
Norma URP<<locked>>92%36,622 psi90%2119 fps96.8%
Ramshot Big Game<<locked>>82%36,303 psi89%2090 fps97.9%
ReloadSwiss RS 14ᴾ<<locked>>100%35,157 psi87%1375 fps100%
ReloadSwiss RS 60<<locked>>86%36,245 psi89%2152 fps99.9%
ReloadSwiss RS 62<<locked>>92%35,752 psi88%2133 fps96.3%
Rottweil R 903<<locked>>86%36,535 psi90%2080 fps98.7%
SNPE Vectan SP 11<<locked>>84%35,404 psi87%2080 fps97.7%
SNPE Vectan Tubal 5000<<locked>>82%35,085 psi86%1955 fps100%
Somchem S355<<locked>>84%35,230 psi87%2041 fps98.2%
Somchem S365<<locked>>94%34,534 psi85%2119 fps99.2%
Vihtavuori N150<<locked>>86%35,824 psi88%2034 fps99.3%
Vihtavuori N160<<locked>>90%36,129 psi89%2077 fps96.5%
Vihtavuori N550<<locked>>90%34,896 psi86%2073 fps96%
Vihtavuori N555ᴾ<<locked>>100%34,896 psi86%2142 fps97.3%
Winchester 6.5 StaBALL<<locked>>90%36,289 psi89%2060 fps98.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 4064<<locked>>80%33,243 psi82%2005 fps99.9%
Accurate 4350<<locked>>88%31,270 psi77%2028 fps95.3%
ADI AR 2208<<locked>>80%33,315 psi82%1975 fps96.4%
Alliant Reloder- TS 15.5<<locked>>80%32,721 psi81%1998 fps98%
Alliant Reloder-16<<locked>>88%32,764 psi81%2041 fps95.5%
Alliant Reloder-17<<locked>>80%28,065 psi69%1959 fps95.3%
Alliant Reloder-23<<locked>>96%29,211 psi72%1995 fps95.6%
Bofors RP3<<locked>>80%31,792 psi78%1995 fps97.9%
Hodgdon H380<<locked>>80%33,040 psi81%1998 fps95.1%
Hodgdon Hybrid 100V25 gr86%27,905 psi69%1913 fps95.4%
Hodgdon TrailBoss<<locked>>80%25,947 psi64%1198 fps100%
IMR 4831<<locked>>90%32,619 psi80%2037 fps95.8%
Norma URP<<locked>>88%32,285 psi80%2034 fps95.3%
Ramshot Big Game<<locked>>80%33,808 psi83%2041 fps97.1%
ReloadSwiss RS 14<<locked>>80%26,382 psi65%1230 fps100%
ReloadSwiss RS 60<<locked>>80%29,863 psi74%2014 fps98.6%
ReloadSwiss RS 62<<locked>>90%33,605 psi83%2090 fps95.5%
Rottweil R 903<<locked>>80%30,023 psi74%1952 fps97%
SNPE Vectan SP 11<<locked>>80%30,995 psi76%1988 fps96.2%
SNPE Vectan Tubal 5000<<locked>>80%32,880 psi81%1919 fps100%
Somchem S355<<locked>>80%31,009 psi76%1959 fps97%
Somchem S36525.1 gr84%25,382 psi63%1903 fps95.8%
Vihtavuori N150<<locked>>80%29,486 psi73%1909 fps97.9%
Vihtavuori N160<<locked>>88%33,953 psi84%2034 fps95.8%
Vihtavuori N550<<locked>>88%32,822 psi81%2034 fps95.2%
Vihtavuori N555<<locked>>96%30,821 psi76%2057 fps95.8%
Winchester 6.5 StaBALL26.5 gr82%28,123 psi69%1890 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 6.5 x 70 R loaded with the .264 | 159gr | RWS TMR. Alliant Reloder-17 delivers the highest muzzle velocity at 2,152 fps; across all powders the maximum-charge window runs from 1,342 fps to 2,152 fps. Alliant Reloder-23 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 81–90 %, leaving at least 10 % headroom. The 159.0 gr projectile in 0.264" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Alliant Reloder-23, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Somchem S365, Hodgdon Hybrid 100V, Winchester 6.5 StaBALL rank at the top here: for 6.5 x 70 R with the .264 | 159gr | RWS TMR they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data