Load data for 6.5 x 58 R + .264 | 126gr | Lehigh Defense Controlled Chaos

6.5 x 58 R cartridge drawing
Lehigh Defense logo

Load Specifications

Bullet Manufacturer:Lehigh Defense
Bullet Weight:126 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):2.298"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:39.3 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:40,611 psi
Recommended Twist Rate:1:8.5

Load data in caliber 6.5 x 58 R with .264 | 126gr | Lehigh Defense Controlled Chaos bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Accurate 4064, Accurate 2495 and Vihtavuori N140.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>82%35,462 psi87%2182 fps99.7%
Accurate 2495<<locked>>90%35,636 psi88%2251 fps99.8%
Accurate 2520<<locked>>84%35,418 psi87%2241 fps97.4%
Accurate 4064<<locked>>92%35,447 psi87%2267 fps98.5%
Alliant AR-Comp<<locked>>84%34,708 psi85%2241 fps100%
Hodgdon BL-C2<<locked>>86%36,216 psi89%2274 fps96.4%
Hodgdon TrailBossᴾ<<locked>>100%33,591 psi83%1463 fps100%
IMR 3031<<locked>>86%35,201 psi87%2270 fps99.3%
Lovex D073.6<<locked>>88%36,303 psi89%2270 fps97.6%
Lovex S062<<locked>>90%36,027 psi89%2231 fps95.7%
Norma 202<<locked>>86%35,679 psi88%2231 fps98%
ReloadSwiss RS 14ᴾ<<locked>>100%33,257 psi82%1490 fps100%
ReloadSwiss RS 60<<locked>>94%36,274 psi89%2320 fps96.4%
Rottweil R 901<<locked>>82%35,230 psi87%2182 fps97.6%
Shooters World Match Rifle<<locked>>88%36,303 psi89%2270 fps97.6%
Shooters World Precision<<locked>>90%36,027 psi89%2231 fps95.7%
SNPE Vectan Tubal 3000<<locked>>84%35,853 psi88%2152 fps97.9%
SNPE Vectan Tubal 5000<<locked>>90%34,693 psi85%2149 fps98.6%
Somchem S321<<locked>>82%36,216 psi89%2238 fps95.9%
Somchem S335<<locked>>84%35,099 psi86%2156 fps98.5%
Vihtavuori N133<<locked>>84%35,563 psi88%2159 fps99.6%
Vihtavuori N135<<locked>>90%36,347 psi90%2251 fps99.9%
Vihtavuori N140<<locked>>88%35,926 psi88%2218 fps98.4%
Vihtavuori N540<<locked>>88%34,432 psi85%2205 fps97.5%
Winchester 748<<locked>>84%34,708 psi85%2241 fps96.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>80%33,083 psi81%2133 fps99.3%
Accurate 249522.2 gr80%25,556 psi63%2031 fps97.8%
Accurate 2520<<locked>>80%30,864 psi76%2146 fps95.9%
Accurate 406422.8 gr82%26,020 psi64%2054 fps95.2%
Alliant AR-Comp<<locked>>80%30,501 psi75%2156 fps100%
Hodgdon BL-C2<<locked>>84%33,852 psi83%2228 fps95.6%
Hodgdon TrailBoss<<locked>>80%24,497 psi60%1296 fps100%
IMR 3031<<locked>>80%28,921 psi71%2129 fps97.8%
Lovex D073.6<<locked>>82%29,834 psi73%2133 fps95.4%
Lovex S062<<locked>>88%34,113 psi84%2192 fps95%
Norma 202<<locked>>80%29,443 psi73%2096 fps96%
ReloadSwiss RS 14<<locked>>80%24,758 psi61%1332 fps100%
ReloadSwiss RS 60<<locked>>92%34,040 psi84%2270 fps95.4%
Rottweil R 901<<locked>>80%33,344 psi82%2139 fps97.1%
Shooters World Match Rifle<<locked>>82%29,834 psi73%2133 fps95.4%
Shooters World Precision<<locked>>88%34,113 psi84%2192 fps95%
SNPE Vectan Tubal 3000<<locked>>80%31,952 psi79%2070 fps96.8%
SNPE Vectan Tubal 5000<<locked>>80%25,860 psi64%1952 fps95.6%
Somchem S321<<locked>>80%33,881 psi83%2192 fps95.1%
Somchem S335<<locked>>80%31,111 psi77%2073 fps97.4%
Vihtavuori N133<<locked>>80%31,720 psi78%2083 fps99%
Vihtavuori N135<<locked>>80%26,760 psi66%2044 fps98%
Vihtavuori N14022.5 gr80%28,108 psi69%2047 fps95.8%
Vihtavuori N540<<locked>>82%28,631 psi71%2073 fps95.4%
Winchester 748<<locked>>82%32,851 psi81%2198 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 59 powders for 6.5 x 58 R loaded with the .264 | 126gr | Lehigh Defense Controlled Chaos. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,320 fps; across all powders the maximum-charge window runs from 1,463 fps to 2,320 fps. Hodgdon Hybrid 100V gives the best case fill at 100 %, and 59 of the 59 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (280 MPa), the top charges use 77–90 %, leaving at least 10 % headroom. The 126.0 gr projectile in 0.264" calls for a 1:8.5 twist; slower twists will usually not stabilise this weight. Hodgdon Hybrid 100V, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Accurate 4064, Accurate 2495, Vihtavuori N140 rank at the top here: for 6.5 x 58 R with the .264 | 126gr | Lehigh Defense Controlled Chaos they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, ADI AR 2206H, ADI AR 2208, Alliant Reloder-15 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data