Load data for 6.5 x 58 R + .264 | 105gr | Sierra Tipped VarmintKing

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.264 \| 105gr \| Sierra Tipped VarmintKing
Manufacturer SKU:	1785
Bullet Weight:	105gr \| 6.8g
Bullet Diameter:	0.264" \| 6.71mm
Bullet Length:	<<locked>>
Caliber:	6.5 x 58 R load data
Case Length (l3):	2.298" \| 58.4mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	39.3 Grains of Water \| 2.55 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B12352_C1019
Last updated:	2026-05-21

Load data for 42 loads in caliber 6.5 x 58 R with .264 | 105gr | Sierra Tipped VarmintKing bullet and 21 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	85%	34664	85%	**31	100%
[ADI AR 2219]*	<<locked>>	89%	35418	87%	**54	93%
Accurate 2015	<<locked>>	96%	34142	84%	**28	96%
[Accurate 2460]*	<<locked>>	94%	34911	86%	**51	92%
[Accurate 2495]*	<<locked>>	97%	24120	59%	**87	92%
Alliant AR-Comp	<<locked>>	96%	31879	78%	**31	97%
Alliant Reloder-10x	<<locked>>	93%	36216	89%	**80	98%
Alliant Reloder-7	<<locked>>	84%	35230	87%	**01	98%
[Baschieri & Pellagri 106]*	<<locked>>	89%	36056	89%	**85	94%
[Hodgdon H322]*	<<locked>>	93%	36100	89%	**67	94%
[Hodgdon H335]*	<<locked>>	91%	34925	86%	**47	92%
[IMR 3031]*	<<locked>>	96%	30545	75%	**92	92%
IMR 4198	<<locked>>	89%	35288	87%	**01	98%
Norma 200	<<locked>>	88%	35288	87%	**54	98%
[Rottweil R 901]*	<<locked>>	96%	34156	84%	**18	92%
[SNPE Vectan SP 10]*	<<locked>>	90%	36143	89%	**77	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	34621	85%	**69	92%
[Somchem S335]*	<<locked>>	97%	33663	83%	**78	93%
Vihtavuori N120	<<locked>>	85%	35172	87%	**05	100%
Vihtavuori N130	<<locked>>	93%	35853	88%	**15	97%
Vihtavuori N133	<<locked>>	97%	34345	85%	**85	95%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	30052	74%	**36	99%
[ADI AR 2219]*	<<locked>>	84%	29704	73%	**19	90%
[Accurate 2015]*	<<locked>>	84%	23554	58%	**72	90%
[Accurate 2460]*	<<locked>>	92%	31836	78%	**85	90%
[Accurate 2495]*	<<locked>>	94%	22147	55%	**24	90%
[Alliant AR-Comp]*	<<locked>>	82%	21524	53%	**29	90%
[Alliant Reloder-10x]*	<<locked>>	81%	24889	61%	**18	93%
Alliant Reloder-7	<<locked>>	81%	32126	79%	**33	97%
[Baschieri & Pellagri 106]*	<<locked>>	81%	28311	70%	**14	91%
[Hodgdon H322]*	<<locked>>	87%	30327	75%	**36	91%
[Hodgdon H335]*	<<locked>>	89%	31879	78%	**78	90%
[IMR 3031]*	<<locked>>	93%	27775	68%	**19	90%
IMR 4198	<<locked>>	81%	28195	69%	**41	95%
Norma 200	<<locked>>	81%	28050	69%	**93	96%
[Rottweil R 901]*	<<locked>>	93%	31241	77%	**52	90%
[SNPE Vectan SP 10]*	<<locked>>	86%	31763	78%	**78	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	93%	31734	78%	**06	90%
[Somchem S335]*	<<locked>>	91%	28007	69%	**54	90%
Vihtavuori N120	<<locked>>	81%	30342	75%	**13	100%
[Vihtavuori N130]*	<<locked>>	81%	24947	61%	**69	93%
[Vihtavuori N133]*	<<locked>>	86%	25266	62%	**69	91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data