Load data for 6.5 x 58 mm Mauser Port. + .264 | 46gr | AERO SOHS,- smax:8.10

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-7, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.264 \| 46gr \| AERO SOHS,- smax:8.10
Bullet Weight:	46gr \| 3.0g
Bullet Diameter:	0.264" \| 6.71mm
Bullet Length:	0.555" \| 14.1mm
Caliber:	6.5 x 58 mm Mauser Port. load data
Case Length (l3):	2.283" \| 58.0mm
Cartridge Length (C.O.L.):	2.716" \| 69.0mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	57.0 Grains of Water \| 3.70 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	51488 psi \| 3550 bar
LID:	LID_B27_C1021
Last updated:	2025-01-01

Load data for 68 loads in caliber 6.5 x 58 mm Mauser Port. with .264 | 46gr | AERO SOHS,- smax:8.10 bullet and 34 powders such as Alliant AR-Comp, Alliant Reloder-7, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	87%	45701	89%	**86	100%
ADI AR 2219	<<locked>>	90%	45963	89%	**86	95%
Accurate 2015	<<locked>>	95%	45121	88%	**34	97%
[Accurate 2460]*	<<locked>>	93%	45919	89%	**11	92%
Accurate 2495	<<locked>>	97%	38769	75%	**52	95%
[Accurate 2520]*	<<locked>>	96%	42859	83%	**85	92%
Alliant AR-Comp 👍	<<locked>>	97%	42366	82%	**67	99%
Alliant Reloder-10x	<<locked>>	93%	46267	90%	**03	98%
Alliant Reloder-7 👍	<<locked>>	86%	46253	90%	**50	99%
Baschieri & Pellagri 106	<<locked>>	89%	45876	89%	**39	96%
[Hodgdon Benchmark]*	<<locked>>	95%	45963	89%	**78	92%
Hodgdon H322	<<locked>>	95%	45963	89%	**86	95%
[Hodgdon H335]*	<<locked>>	90%	46093	90%	**67	94%
Hodgdon H4198	<<locked>>	87%	45861	89%	**94	95%
Hodgdon TrailBoss	<<locked>>	97%	29631	58%	**97	100%
[IMR 3031]*	<<locked>>	96%	36027	70%	**60	92%
IMR 4198 👍	<<locked>>	91%	45585	89%	**60	99%
[Lovex D073.4]*	<<locked>>	91%	45455	88%	**91	92%
[Lovex D073.5]*	<<locked>>	93%	46238	90%	**11	92%
Norma 200 👍	<<locked>>	88%	45687	89%	**80	99%
[Norma 202]*	<<locked>>	97%	41669	81%	**48	93%
ReloadSwiss RS 14	<<locked>>	97%	29269	57%	**49	100%
[ReloadSwiss RS 40]*	<<locked>>	93%	46325	90%	**44	93%
[Rottweil R 901]*	<<locked>>	97%	45179	88%	**14	93%
SNPE Vectan BA6 1/2	<<locked>>	86%	45919	89%	**27	100%
[SNPE Vectan SP 10]*	<<locked>>	89%	45585	89%	**60	94%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	45078	88%	**42	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	36129	70%	**99	92%
[Somchem S335]*	<<locked>>	97%	43134	84%	**02	94%
Vihtavuori N120	<<locked>>	89%	46209	90%	**30	100%
Vihtavuori N130	<<locked>>	95%	45876	89%	**14	98%
Vihtavuori N133	<<locked>>	97%	40408	78%	**63	95%
[Vihtavuori N140]*	<<locked>>	97%	38725	75%	**34	92%
[Winchester 748]*	<<locked>>	95%	46267	90%	**76	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	37463	73%	**73	99%
[ADI AR 2219]*	<<locked>>	81%	34098	66%	**45	90%
[Accurate 2015]*	<<locked>>	82%	28514	55%	**38	90%
[Accurate 2460]*	<<locked>>	90%	41176	80%	**80	90%
[Accurate 2495]*	<<locked>>	89%	29298	57%	**37	90%
[Accurate 2520]*	<<locked>>	94%	38159	74%	**63	90%
[Alliant AR-Comp]*	<<locked>>	82%	25831	50%	**86	91%
[Alliant Reloder-10x]*	<<locked>>	81%	31125	60%	**60	93%
Alliant Reloder-7	<<locked>>	81%	39073	76%	**50	97%
[Baschieri & Pellagri 106]*	<<locked>>	81%	34896	68%	**33	92%
[Hodgdon Benchmark]*	<<locked>>	92%	42438	82%	**83	90%
[Hodgdon H322]*	<<locked>>	87%	34098	66%	**45	90%
[Hodgdon H335]*	<<locked>>	84%	36550	71%	**98	90%
[Hodgdon H4198]*	<<locked>>	81%	37202	72%	**48	91%
Hodgdon TrailBoss	<<locked>>	81%	22800	44%	**74	100%
[IMR 3031]*	<<locked>>	93%	32358	63%	**35	90%
IMR 4198	<<locked>>	81%	33083	64%	**02	95%
[Lovex D073.4]*	<<locked>>	89%	41582	81%	**89	90%
[Lovex D073.5]*	<<locked>>	91%	41466	81%	**99	90%
Norma 200	<<locked>>	81%	35476	69%	**88	96%
[Norma 202]*	<<locked>>	93%	35708	69%	**88	90%
ReloadSwiss RS 14	<<locked>>	81%	22611	44%	**30	100%
[ReloadSwiss RS 40]*	<<locked>>	89%	39958	78%	**86	90%
[Rottweil R 901]*	<<locked>>	91%	37275	72%	**94	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	40538	79%	**15	100%
[SNPE Vectan SP 10]*	<<locked>>	83%	36361	71%	**01	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	91%	36463	71%	**15	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	94%	33156	64%	**04	90%
[Somchem S335]*	<<locked>>	88%	33054	64%	**20	90%
Vihtavuori N120	<<locked>>	81%	34795	68%	**48	99%
[Vihtavuori N130]*	<<locked>>	81%	29428	57%	**35	92%
[Vihtavuori N133]*	<<locked>>	87%	29370	57%	**19	90%
[Vihtavuori N140]*	<<locked>>	94%	34998	68%	**15	90%
[Winchester 748]*	<<locked>>	92%	41945	81%	**68	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data