
Load Specifications
Load data in caliber 6.5 x 57 R with .264 | 128gr | MRR Green Long Range bullet and 34 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-26, Winchester StaBALL HD and Vihtavuori N555.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 3100 | <<locked>> | 96% | 42,337 psi | 88% | 2641 fps | 97.3% |
| Accurate 4350 | <<locked>> | 86% | 41,640 psi | 87% | 2644 fps | 98.6% |
| Alliant Reloder-16 | <<locked>> | 88% | 43,265 psi | 90% | 2710 fps | 99.2% |
| Alliant Reloder-17 | <<locked>> | 82% | 40,292 psi | 84% | 2667 fps | 99.6% |
| Alliant Reloder-23 | <<locked>> | 98% | 43,047 psi | 90% | 2726 fps | 99.9% |
| Alliant Reloder-25ᴾ | <<locked>> | 100% | 40,306 psi | 84% | 2687 fps | 97.4% |
| Alliant Reloder-26 | <<locked>> | 94% | 41,843 psi | 87% | 2769 fps | 98.6% |
| Hodgdon H414 | <<locked>> | 82% | 41,901 psi | 88% | 2651 fps | 96.1% |
| Hodgdon Hybrid 100V | <<locked>> | 90% | 42,902 psi | 90% | 2648 fps | 99.8% |
| Hodgdon Superformance | <<locked>> | 86% | 43,221 psi | 90% | 2707 fps | 96% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 36,042 psi | 75% | 1739 fps | 100% |
| IMR 4451 Enduron | <<locked>> | 82% | 42,569 psi | 89% | 2589 fps | 96.1% |
| IMR 4831 | <<locked>> | 90% | 40,886 psi | 85% | 2615 fps | 98.5% |
| Lovex S065 | <<locked>> | 84% | 42,279 psi | 88% | 2585 fps | 97.5% |
| Lovex S070 | <<locked>> | 86% | 43,149 psi | 90% | 2621 fps | 96.7% |
| Lovex S071ᴾ | <<locked>> | 100% | 40,350 psi | 84% | 2602 fps | 96.7% |
| Norma URP | <<locked>> | 86% | 41,495 psi | 87% | 2641 fps | 98.5% |
| Ramshot Hunter | <<locked>> | 88% | 42,902 psi | 90% | 2680 fps | 97.3% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 36,593 psi | 76% | 1778 fps | 100% |
| ReloadSwiss RS 60 | <<locked>> | 82% | 42,873 psi | 90% | 2726 fps | 100% |
| ReloadSwiss RS 62 | <<locked>> | 86% | 41,220 psi | 86% | 2661 fps | 98.2% |
| ReloadSwiss RS 70 | <<locked>> | 88% | 43,308 psi | 90% | 2733 fps | 98.4% |
| Shooters World Long Rifle | <<locked>> | 84% | 42,279 psi | 88% | 2585 fps | 97.5% |
| Shooters World SW4350 | <<locked>> | 86% | 43,149 psi | 90% | 2621 fps | 96.7% |
| SNPE Vectan Tubal 7000 | <<locked>> | 84% | 41,626 psi | 87% | 2533 fps | 96% |
| Somchem S365 | <<locked>> | 90% | 42,525 psi | 89% | 2697 fps | 100% |
| Unknown powder | <<locked>> | 84% | 41,814 psi | 87% | 2638 fps | 98% |
| Vihtavuori N150 | <<locked>> | 86% | 42,554 psi | 89% | 2575 fps | 100% |
| Vihtavuori N160 | <<locked>> | 84% | 42,105 psi | 88% | 2615 fps | 98.5% |
| Vihtavuori N550 | <<locked>> | 84% | 42,482 psi | 89% | 2657 fps | 98.5% |
| Vihtavuori N555 | <<locked>> | 94% | 42,192 psi | 88% | 2697 fps | 99.1% |
| Winchester 6.5 StaBALL | <<locked>> | 86% | 42,351 psi | 88% | 2608 fps | 99.8% |
| Winchester 760 | <<locked>> | 82% | 41,901 psi | 88% | 2651 fps | 96.1% |
| Winchester StaBALL HDᴾ | <<locked>> | 100% | 41,162 psi | 86% | 2812 fps | 100% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 3100 | <<locked>> | 92% | 37,130 psi | 78% | 2536 fps | 95.7% |
| Accurate 4350 | <<locked>> | 80% | 33,968 psi | 71% | 2477 fps | 96.5% |
| Alliant Reloder-16 | <<locked>> | 80% | 33,489 psi | 70% | 2484 fps | 96.5% |
| Alliant Reloder-17 | <<locked>> | 80% | 37,681 psi | 79% | 2612 fps | 99.2% |
| Alliant Reloder-23 | <<locked>> | 84% | 27,659 psi | 58% | 2346 fps | 95.4% |
| Alliant Reloder-25 | <<locked>> | 96% | 35,505 psi | 74% | 2569 fps | 95.5% |
| Alliant Reloder-26 | 46.7 gr | 88% | 34,026 psi | 71% | 2582 fps | 95.9% |
| Hodgdon H414 | <<locked>> | 80% | 38,957 psi | 81% | 2589 fps | 95.2% |
| Hodgdon Hybrid 100V | <<locked>> | 80% | 31,111 psi | 65% | 2388 fps | 97.3% |
| Hodgdon Superformance | <<locked>> | 84% | 40,205 psi | 84% | 2644 fps | 95% |
| Hodgdon TrailBoss | <<locked>> | 80% | 26,963 psi | 56% | 1552 fps | 100% |
| IMR 4451 Enduron | <<locked>> | 80% | 39,900 psi | 83% | 2533 fps | 95.3% |
| IMR 4831 | <<locked>> | 82% | 31,647 psi | 66% | 2405 fps | 95.6% |
| Lovex S065 | <<locked>> | 80% | 37,434 psi | 78% | 2484 fps | 96.1% |
| Lovex S070 | <<locked>> | 82% | 37,942 psi | 79% | 2513 fps | 95.1% |
| Lovex S071 | <<locked>> | 96% | 35,665 psi | 75% | 2500 fps | 95.2% |
| Norma URP | <<locked>> | 80% | 33,881 psi | 71% | 2470 fps | 96.3% |
| Ramshot Hunter | <<locked>> | 84% | 37,652 psi | 79% | 2569 fps | 95.7% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 27,514 psi | 57% | 1594 fps | 100% |
| ReloadSwiss RS 60 | <<locked>> | 80% | 40,103 psi | 84% | 2671 fps | 100% |
| ReloadSwiss RS 62 | <<locked>> | 80% | 33,431 psi | 70% | 2487 fps | 95.9% |
| ReloadSwiss RS 70 | <<locked>> | 82% | 35,418 psi | 74% | 2549 fps | 95.9% |
| Shooters World Long Rifle | <<locked>> | 80% | 37,434 psi | 78% | 2484 fps | 96.1% |
| Shooters World SW4350 | <<locked>> | 82% | 37,942 psi | 79% | 2513 fps | 95.1% |
| SNPE Vectan Tubal 7000 | <<locked>> | 82% | 38,986 psi | 81% | 2477 fps | 95.2% |
| Somchem S365 | <<locked>> | 80% | 30,414 psi | 64% | 2425 fps | 98.4% |
| Unknown powder | <<locked>> | 80% | 36,825 psi | 77% | 2533 fps | 96.6% |
| Vihtavuori N150 | <<locked>> | 80% | 35,259 psi | 74% | 2431 fps | 99.4% |
| Vihtavuori N160 | <<locked>> | 80% | 36,811 psi | 77% | 2507 fps | 97.2% |
| Vihtavuori N550 | <<locked>> | 80% | 37,260 psi | 78% | 2546 fps | 97.2% |
| Vihtavuori N555 | 40.6 gr | 84% | 30,139 psi | 63% | 2421 fps | 95.6% |
| Winchester 6.5 StaBALL | <<locked>> | 80% | 34,795 psi | 73% | 2451 fps | 98.6% |
| Winchester 760 | <<locked>> | 80% | 38,957 psi | 81% | 2589 fps | 95.2% |
| Winchester StaBALL HD | 44.8 gr | 88% | 27,775 psi | 58% | 2431 fps | 96.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 34 powders for 6.5 x 57 R loaded with the .264 | 128gr | MRR Green Long Range. Winchester StaBALL HD delivers the highest muzzle velocity at 2,812 fps; across all powders the maximum-charge window runs from 1,739 fps to 2,812 fps. Alliant Reloder-25 gives the best case fill at 100 %, and 34 of the 34 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (330 MPa), the top charges use 75–90 %, leaving at least 10 % headroom. The 128.0 gr projectile in 0.264" calls for a 1:8.5 twist; slower twists will usually not stabilise this weight. Alliant Reloder-25, Hodgdon TrailBoss, Lovex S071 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-26, Winchester StaBALL HD, Vihtavuori N555 rank at the top here: for 6.5 x 57 R with the .264 | 128gr | MRR Green Long Range they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.