Load data for 6.5 x 57 R + .264 | 120gr | SUS-TAC HPT

6.5 x 57 R cartridge drawing
SUS-TAC logo

Load Specifications

Bullet Manufacturer:SUS-TAC
Bullet Weight:120 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):2.232"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:59 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:47,862 psi
Recommended Twist Rate:1:8.5

Load data in caliber 6.5 x 57 R with .264 | 120gr | SUS-TAC HPT bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-26, Vihtavuori N555 and ReloadSwiss RS 70.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>98%42,786 psi89%2726 fps96.6%
Accurate 4350<<locked>>88%41,901 psi88%2730 fps98%
Alliant Reloder-16<<locked>>88%41,031 psi86%2740 fps98.1%
Alliant Reloder-17<<locked>>84%40,930 psi86%2762 fps99.3%
Alliant Reloder-23ᴾ<<locked>>100%43,279 psi90%2808 fps99.6%
Alliant Reloder-26<<locked>>96%42,192 psi88%2851 fps98%
Hodgdon Hybrid 100V<<locked>>92%43,236 psi90%2733 fps99.5%
Hodgdon TrailBossᴾ<<locked>>100%35,781 psi75%1788 fps100%
IMR 4831<<locked>>90%42,859 psi90%2733 fps98.3%
Lovex S065<<locked>>86%42,888 psi90%2674 fps97%
Norma URP<<locked>>88%41,901 psi88%2726 fps97.9%
ReloadSwiss RS 14ᴾ<<locked>>100%36,550 psi76%1837 fps100%
ReloadSwiss RS 60<<locked>>82%40,509 psi85%2762 fps100%
ReloadSwiss RS 62<<locked>>88%41,655 psi87%2749 fps97.7%
ReloadSwiss RS 70<<locked>>88%41,205 psi86%2759 fps97.1%
Rottweil R 903<<locked>>82%41,176 psi86%2667 fps99.3%
Shooters World Long Rifle<<locked>>86%42,888 psi90%2674 fps97%
SNPE Vectan SP 11<<locked>>82%42,337 psi88%2720 fps99%
Somchem S355<<locked>>82%41,872 psi87%2671 fps99.3%
Somchem S365<<locked>>92%43,004 psi90%2792 fps100%
Vihtavuori N150<<locked>>84%42,569 psi89%2654 fps99.9%
Vihtavuori N160<<locked>>86%40,640 psi85%2667 fps97.6%
Vihtavuori N550<<locked>>88%42,989 psi90%2730 fps98%
Vihtavuori N555<<locked>>96%41,930 psi88%2772 fps98.6%
Winchester 6.5 StaBALL<<locked>>88%43,091 psi90%2700 fps99.6%
Winchester StaBALL HDᴾ<<locked>>100%38,928 psi81%2831 fps99.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>96%39,900 psi83%2667 fps95.8%
Accurate 4350<<locked>>82%34,156 psi71%2556 fps95.7%
Alliant Reloder-16<<locked>>82%33,968 psi71%2566 fps95.7%
Alliant Reloder-17<<locked>>80%35,636 psi74%2638 fps98.1%
Alliant Reloder-23<<locked>>88%29,718 psi62%2474 fps95.6%
Alliant Reloder-2648.8 gr92%36,666 psi77%2720 fps96.1%
Hodgdon Hybrid 100V<<locked>>80%29,385 psi61%2411 fps95.7%
Hodgdon TrailBoss<<locked>>80%26,731 psi56%1601 fps100%
IMR 4831<<locked>>82%33,025 psi69%2513 fps95.4%
Lovex S065<<locked>>82%37,956 psi79%2569 fps95.5%
Norma URP<<locked>>82%34,200 psi71%2556 fps95.6%
ReloadSwiss RS 14<<locked>>80%27,238 psi57%1640 fps100%
ReloadSwiss RS 60<<locked>>80%37,942 psi79%2703 fps99.9%
ReloadSwiss RS 62<<locked>>82%33,765 psi71%2569 fps95.1%
ReloadSwiss RS 7044.2 gr84%35,998 psi75%2635 fps95.2%
Rottweil R 903<<locked>>80%38,740 psi81%2615 fps98.9%
Shooters World Long Rifle<<locked>>82%37,956 psi79%2569 fps95.5%
SNPE Vectan SP 11<<locked>>80%39,682 psi83%2664 fps98.5%
Somchem S355<<locked>>80%39,204 psi82%2615 fps98.8%
Somchem S365<<locked>>80%28,834 psi60%2451 fps97%
Vihtavuori N150<<locked>>80%37,492 psi78%2552 fps99.4%
Vihtavuori N160<<locked>>80%33,446 psi70%2503 fps95.2%
Vihtavuori N550<<locked>>82%35,099 psi73%2556 fps95.6%
Vihtavuori N55542.6 gr88%32,300 psi67%2552 fps95.7%
Winchester 6.5 StaBALL<<locked>>80%33,054 psi69%2477 fps97.4%
Winchester StaBALL HD<<locked>>90%28,079 psi59%2493 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for 6.5 x 57 R loaded with the .264 | 120gr | SUS-TAC HPT. Alliant Reloder-26 delivers the highest muzzle velocity at 2,851 fps; across all powders the maximum-charge window runs from 1,788 fps to 2,851 fps. Alliant Reloder-23 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (330 MPa), the top charges use 75–90 %, leaving at least 10 % headroom. The 120.0 gr projectile in 0.264" calls for a 1:8.5 twist; slower twists will usually not stabilise this weight. Alliant Reloder-23, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-26, Vihtavuori N555, ReloadSwiss RS 70 rank at the top here: for 6.5 x 57 R with the .264 | 120gr | SUS-TAC HPT they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data