Load data for 6.5 x 57 R + .264 | 120gr | Barnes XLC S

6.5 x 57 R cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:120 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):2.232"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:59 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:47,862 psi
Recommended Twist Rate:1:10.0

Load data in caliber 6.5 x 57 R with .264 | 120gr | Barnes XLC S bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Winchester StaBALL HD, Alliant Reloder-26 and Vihtavuori N555.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>94%43,279 psi90%2723 fps97%
Accurate 4350<<locked>>84%42,322 psi88%2723 fps98.3%
Alliant Reloder-16<<locked>>86%42,801 psi89%2769 fps98.7%
Alliant Reloder-17<<locked>>82%42,902 psi90%2792 fps99.7%
Alliant Reloder-23<<locked>>96%43,076 psi90%2795 fps99.7%
Alliant Reloder-25ᴾ<<locked>>100%42,989 psi90%2812 fps97.6%
Alliant Reloder-26<<locked>>92%42,206 psi88%2844 fps98.2%
Hodgdon Hybrid 100V<<locked>>88%42,757 psi89%2713 fps99.5%
Hodgdon TrailBossᴾ<<locked>>100%36,564 psi76%1811 fps100%
IMR 4831<<locked>>86%42,801 psi89%2720 fps98.5%
Lovex S065<<locked>>82%42,438 psi89%2654 fps97.1%
Lovex S070<<locked>>84%43,221 psi90%2687 fps96.1%
Lovex S071<<locked>>98%41,437 psi87%2684 fps96.5%
Norma URP<<locked>>84%41,437 psi87%2707 fps98%
Ramshot Hunter<<locked>>86%42,685 psi89%2746 fps96.7%
ReloadSwiss RS 14ᴾ<<locked>>100%37,173 psi78%1850 fps100%
ReloadSwiss RS 62<<locked>>84%41,466 psi87%2733 fps97.8%
ReloadSwiss RS 70<<locked>>86%42,888 psi90%2792 fps97.8%
Shooters World Long Rifle<<locked>>82%42,438 psi89%2654 fps97.1%
Shooters World SW4350<<locked>>84%43,221 psi90%2687 fps96.1%
Somchem S365<<locked>>88%42,859 psi90%2776 fps100%
Vihtavuori N160<<locked>>84%42,975 psi90%2703 fps98.3%
Vihtavuori N550<<locked>>84%42,496 psi89%2710 fps98%
Vihtavuori N555<<locked>>92%42,569 psi89%2772 fps98.9%
Winchester 6.5 StaBALL<<locked>>84%42,018 psi88%2671 fps99.6%
Winchester StaBALL HD<<locked>>98%41,408 psi87%2884 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>90%38,058 psi80%2612 fps95.4%
Accurate 4350<<locked>>80%37,115 psi78%2608 fps97%
Alliant Reloder-16<<locked>>80%35,984 psi75%2608 fps96.8%
Alliant Reloder-17<<locked>>80%40,161 psi84%2733 fps99.3%
Alliant Reloder-23<<locked>>82%28,645 psi60%2425 fps95.3%
Alliant Reloder-25<<locked>>96%38,058 psi80%2694 fps95.9%
Alliant Reloder-2647.2 gr86%34,650 psi72%2654 fps95.4%
Hodgdon Hybrid 100V<<locked>>80%33,605 psi70%2510 fps97.6%
Hodgdon TrailBoss<<locked>>80%27,543 psi58%1621 fps100%
IMR 4831<<locked>>80%35,723 psi75%2562 fps96.6%
Lovex S065<<locked>>80%40,030 psi84%2602 fps96.4%
Lovex S070<<locked>>82%40,799 psi85%2638 fps95.4%
Lovex S071<<locked>>94%36,883 psi77%2585 fps95%
Norma URP<<locked>>80%36,651 psi77%2598 fps96.7%
Ramshot Hunter<<locked>>82%37,695 psi79%2631 fps95.1%
ReloadSwiss RS 14<<locked>>80%27,920 psi58%1657 fps100%
ReloadSwiss RS 62<<locked>>80%36,492 psi76%2618 fps96.4%
ReloadSwiss RS 70<<locked>>80%35,563 psi74%2615 fps95.3%
Shooters World Long Rifle<<locked>>80%40,030 psi84%2602 fps96.4%
Shooters World SW4350<<locked>>82%40,799 psi85%2638 fps95.4%
Somchem S365<<locked>>80%33,286 psi70%2559 fps98.8%
Vihtavuori N160<<locked>>80%37,855 psi79%2595 fps97%
Vihtavuori N550<<locked>>80%37,536 psi78%2598 fps96.7%
Vihtavuori N55541 gr82%31,343 psi65%2507 fps95.5%
Winchester 6.5 StaBALL<<locked>>80%37,014 psi77%2566 fps98.8%
Winchester StaBALL HD45.3 gr86%28,877 psi60%2513 fps96%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for 6.5 x 57 R loaded with the .264 | 120gr | Barnes XLC S. Winchester StaBALL HD delivers the highest muzzle velocity at 2,884 fps; across all powders the maximum-charge window runs from 1,811 fps to 2,884 fps. Alliant Reloder-25 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (330 MPa), the top charges use 76–90 %, leaving at least 10 % headroom. The 120.0 gr projectile in 0.264" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Alliant Reloder-25, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Winchester StaBALL HD, Alliant Reloder-26, Vihtavuori N555 rank at the top here: for 6.5 x 57 R with the .264 | 120gr | Barnes XLC S they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data