
Load Specifications
Load data in caliber 6.5 x 57 R with .263 | 130gr | Rhino Penetrator bullet and 34 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-26, Winchester StaBALL HD and Alliant Reloder-23.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 3100 | <<locked>> | 96% | 42,902 psi | 90% | 2631 fps | 97.5% |
| Accurate 4350 | <<locked>> | 86% | 42,076 psi | 88% | 2631 fps | 98.7% |
| Alliant Reloder-16 | <<locked>> | 86% | 40,930 psi | 86% | 2641 fps | 98.8% |
| Alliant Reloder-17 | <<locked>> | 82% | 40,683 psi | 85% | 2654 fps | 99.7% |
| Alliant Reloder-23 | <<locked>> | 98% | 43,265 psi | 90% | 2710 fps | 99.9% |
| Alliant Reloder-25ᴾ | <<locked>> | 100% | 40,553 psi | 85% | 2674 fps | 97.6% |
| Alliant Reloder-26 | <<locked>> | 94% | 42,453 psi | 89% | 2759 fps | 98.8% |
| Hodgdon H414 | <<locked>> | 82% | 42,032 psi | 88% | 2635 fps | 96.3% |
| Hodgdon Hybrid 100V | <<locked>> | 88% | 40,437 psi | 84% | 2579 fps | 99.6% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 36,056 psi | 75% | 1722 fps | 100% |
| IMR 4451 Enduron | <<locked>> | 82% | 42,598 psi | 89% | 2569 fps | 96.3% |
| IMR 4831 | <<locked>> | 90% | 41,350 psi | 86% | 2602 fps | 98.7% |
| Lovex S065 | <<locked>> | 84% | 42,598 psi | 89% | 2572 fps | 97.7% |
| Lovex S070 | <<locked>> | 86% | 43,265 psi | 90% | 2605 fps | 96.8% |
| Lovex S071ᴾ | <<locked>> | 100% | 40,886 psi | 85% | 2592 fps | 97% |
| Norma MRP | <<locked>> | 94% | 42,235 psi | 88% | 2717 fps | 96.2% |
| Norma URP | <<locked>> | 86% | 41,640 psi | 87% | 2625 fps | 98.6% |
| Ramshot Hunter | <<locked>> | 86% | 40,364 psi | 84% | 2608 fps | 96.8% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 36,622 psi | 77% | 1762 fps | 100% |
| ReloadSwiss RS 60 | <<locked>> | 82% | 43,279 psi | 90% | 2713 fps | 100% |
| ReloadSwiss RS 62 | <<locked>> | 86% | 41,698 psi | 87% | 2648 fps | 98.5% |
| ReloadSwiss RS 70 | <<locked>> | 86% | 40,741 psi | 85% | 2661 fps | 97.9% |
| Shooters World Long Rifle | <<locked>> | 84% | 42,598 psi | 89% | 2572 fps | 97.7% |
| Shooters World SW4350 | <<locked>> | 86% | 43,265 psi | 90% | 2605 fps | 96.8% |
| SNPE Vectan Tubal 7000 | <<locked>> | 84% | 41,974 psi | 88% | 2520 fps | 96.3% |
| Somchem S365 | <<locked>> | 90% | 43,018 psi | 90% | 2684 fps | 100% |
| Unknown powder | <<locked>> | 84% | 42,235 psi | 88% | 2628 fps | 98.2% |
| Vihtavuori N150 | <<locked>> | 86% | 42,902 psi | 90% | 2562 fps | 100% |
| Vihtavuori N160 | <<locked>> | 84% | 42,235 psi | 88% | 2598 fps | 98.6% |
| Vihtavuori N550 | <<locked>> | 84% | 42,902 psi | 90% | 2644 fps | 98.7% |
| Vihtavuori N555 | <<locked>> | 94% | 42,438 psi | 89% | 2680 fps | 99.3% |
| Winchester 6.5 StaBALL | <<locked>> | 86% | 42,786 psi | 89% | 2598 fps | 99.9% |
| Winchester 760 | <<locked>> | 82% | 42,032 psi | 88% | 2635 fps | 96.3% |
| Winchester StaBALL HDᴾ | <<locked>> | 100% | 41,466 psi | 87% | 2799 fps | 100% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 3100 | <<locked>> | 90% | 34,853 psi | 73% | 2464 fps | 95% |
| Accurate 4350 | <<locked>> | 80% | 34,069 psi | 71% | 2461 fps | 96.7% |
| Alliant Reloder-16 | <<locked>> | 80% | 33,779 psi | 71% | 2474 fps | 96.8% |
| Alliant Reloder-17 | <<locked>> | 80% | 38,072 psi | 80% | 2602 fps | 99.3% |
| Alliant Reloder-23 | 40.3 gr | 84% | 27,920 psi | 58% | 2336 fps | 95.8% |
| Alliant Reloder-25 | <<locked>> | 96% | 35,650 psi | 74% | 2556 fps | 95.8% |
| Alliant Reloder-26 | 45.3 gr | 86% | 31,836 psi | 67% | 2503 fps | 95% |
| Hodgdon H414 | <<locked>> | 80% | 39,334 psi | 82% | 2575 fps | 95.5% |
| Hodgdon Hybrid 100V | <<locked>> | 80% | 31,357 psi | 66% | 2375 fps | 97.5% |
| Hodgdon TrailBoss | <<locked>> | 80% | 26,919 psi | 56% | 1539 fps | 100% |
| IMR 4451 Enduron | <<locked>> | 80% | 40,190 psi | 84% | 2520 fps | 95.6% |
| IMR 4831 | <<locked>> | 80% | 30,052 psi | 63% | 2343 fps | 95.1% |
| Lovex S065 | <<locked>> | 80% | 37,695 psi | 79% | 2470 fps | 96.4% |
| Lovex S070 | <<locked>> | 82% | 38,247 psi | 80% | 2500 fps | 95.3% |
| Lovex S071 | <<locked>> | 96% | 35,839 psi | 75% | 2487 fps | 95.4% |
| Norma MRP | <<locked>> | 92% | 39,494 psi | 83% | 2657 fps | 95.3% |
| Norma URP | <<locked>> | 80% | 34,185 psi | 71% | 2461 fps | 96.6% |
| Ramshot Hunter | <<locked>> | 82% | 35,404 psi | 74% | 2497 fps | 95% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 27,499 psi | 57% | 1578 fps | 100% |
| ReloadSwiss RS 60 | <<locked>> | 80% | 40,466 psi | 85% | 2657 fps | 100% |
| ReloadSwiss RS 62 | <<locked>> | 80% | 33,765 psi | 71% | 2477 fps | 96.2% |
| ReloadSwiss RS 70 | <<locked>> | 80% | 33,286 psi | 70% | 2477 fps | 95.2% |
| Shooters World Long Rifle | <<locked>> | 80% | 37,695 psi | 79% | 2470 fps | 96.4% |
| Shooters World SW4350 | <<locked>> | 82% | 38,247 psi | 80% | 2500 fps | 95.3% |
| SNPE Vectan Tubal 7000 | <<locked>> | 82% | 39,291 psi | 82% | 2464 fps | 95.5% |
| Somchem S365 | <<locked>> | 80% | 30,690 psi | 64% | 2418 fps | 98.6% |
| Unknown powder | <<locked>> | 80% | 36,898 psi | 77% | 2513 fps | 96.8% |
| Vihtavuori N150 | <<locked>> | 80% | 35,534 psi | 74% | 2418 fps | 99.5% |
| Vihtavuori N160 | <<locked>> | 80% | 36,912 psi | 77% | 2490 fps | 97.4% |
| Vihtavuori N550 | <<locked>> | 80% | 37,608 psi | 79% | 2533 fps | 97.4% |
| Vihtavuori N555 | <<locked>> | 82% | 28,442 psi | 59% | 2356 fps | 95% |
| Winchester 6.5 StaBALL | <<locked>> | 80% | 34,867 psi | 73% | 2434 fps | 98.8% |
| Winchester 760 | <<locked>> | 80% | 39,334 psi | 82% | 2575 fps | 95.5% |
| Winchester StaBALL HD | 43.5 gr | 86% | 26,208 psi | 55% | 2356 fps | 95.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 34 powders for 6.5 x 57 R loaded with the .263 | 130gr | Rhino Penetrator. Winchester StaBALL HD delivers the highest muzzle velocity at 2,799 fps; across all powders the maximum-charge window runs from 1,722 fps to 2,799 fps. Alliant Reloder-25 gives the best case fill at 100 %, and 34 of the 34 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (330 MPa), the top charges use 75–90 %, leaving at least 10 % headroom. The 130.0 gr projectile in 0.263" calls for a 1:8.5 twist; slower twists will usually not stabilise this weight. Alliant Reloder-25, Hodgdon TrailBoss, Lovex S071 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-26, Winchester StaBALL HD, Alliant Reloder-23 rank at the top here: for 6.5 x 57 R with the .263 | 130gr | Rhino Penetrator they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.