top of page

Load data for 6.5 x 52 R + .257 | 80gr | Impala LWHV LS

Recommended Powder(s):

6.5 x 52 R + .257 | 80gr | Impala LWHV LS

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.257 | 80gr | Impala LWHV LS
Bullet Weight:
80gr | 5.2g
Bullet Diameter:
0.257" | 6.53mm
Bullet Length:
1.106" | 28.1mm
Caliber:
6.5 x 52 R load data
Case Length (l3):
2.047" | 52.0mm
Cartridge Length (C.O.L.):
2.502" | 63.5mm
Seated Depth:
0.651" | 16.5mm
Shank Seated Depth:
0.651" | 16.5mm
Case Capacity:
37.0 Grains of Water | 2.40 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
35534 psi | 2450 bar
LID:
LID_B2971_C1008
Last updated:
2025-01-01

Load data for 18 loads in caliber 6.5 x 52 R with .257 | 80gr | Impala LWHV LS bullet and 9 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service. 

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 2015]*
<<locked>>
87%
31024
87%
**30
94%
[Accurate 2495]*
<<locked>>
96%
31531
89%
**48
94%
Alliant AR-Comp
<<locked>>
92%
31836
90%
**08
96%
Alliant Reloder-10x
<<locked>>
83%
30922
87%
**39
95%
Hodgdon TrailBoss
<<locked>>
94%
28979
82%
**06
100%
[IMR 3031]*
<<locked>>
96%
31589
89%
**89
91%
ReloadSwiss RS 14
<<locked>>
94%
28892
81%
**45
100%
Vihtavuori N130
<<locked>>
86%
31865
90%
**03
95%
[Vihtavuori N133]*
<<locked>>
92%
31618
89%
**93
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 2015]*
<<locked>>
81%
25918
73%
**79
91%
[Accurate 2495]*
<<locked>>
87%
24381
69%
**31
90%
[Alliant AR-Comp]*
<<locked>>
81%
23293
66%
**20
91%
[Alliant Reloder-10x]*
<<locked>>
81%
28732
81%
**74
94%
Hodgdon TrailBoss
<<locked>>
91%
27572
78%
**73
100%
[IMR 3031]*
<<locked>>
94%
29414
83%
**26
90%
ReloadSwiss RS 14
<<locked>>
84%
24700
70%
**47
100%
[Vihtavuori N130]*
<<locked>>
81%
27659
78%
**85
93%
[Vihtavuori N133]*
<<locked>>
86%
26672
75%
**46
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page