Load data for 6.5 x 52 R + .257 | 122gr | Remington SP Extended-Range

6.5 x 52 R cartridge drawing
Remington logo

Load Specifications

Bullet Manufacturer:Remington
Bullet Weight:122 gr
Bullet Diameter:0.257"
Bullet Length:<<locked>>
Case Length (l3):2.047"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:37 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:35,534 psi
Recommended Twist Rate:1:12.5

Load data in caliber 6.5 x 52 R with .257 | 122gr | Remington SP Extended-Range bullet and 12 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>86%32,068 psi90%2178 fps99.5%
Accurate 4064<<locked>>88%32,068 psi90%2195 fps97.8%
Hodgdon TrailBoss<<locked>>96%31,647 psi89%1430 fps100%
IMR 3031<<locked>>82%31,459 psi89%2188 fps98.7%
Lovex D073.6<<locked>>82%30,530 psi86%2149 fps96%
Norma 202<<locked>>82%32,024 psi90%2152 fps97.2%
ReloadSwiss RS 14<<locked>>96%31,865 psi90%1467 fps100%
Shooters World Match Rifle<<locked>>82%30,530 psi86%2149 fps96%
SNPE Vectan Tubal 5000<<locked>>86%31,459 psi89%2083 fps98%
Vihtavuori N135<<locked>>84%30,995 psi87%2142 fps99.3%
Vihtavuori N140<<locked>>82%30,211 psi85%2096 fps97%
Vihtavuori N540<<locked>>84%30,864 psi87%2126 fps96.6%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%26,092 psi73%2041 fps98.2%
Accurate 4064<<locked>>82%26,571 psi75%2064 fps95.7%
Hodgdon TrailBoss7.4 gr80%24,700 psi70%1299 fps100%
IMR 3031<<locked>>80%29,631 psi83%2146 fps98.2%
Lovex D073.6<<locked>>80%28,427 psi80%2100 fps95.1%
Norma 202<<locked>>80%30,226 psi85%2113 fps96.6%
ReloadSwiss RS 147.6 gr80%25,005 psi70%1339 fps100%
Shooters World Match Rifle<<locked>>80%28,427 psi80%2100 fps95.1%
SNPE Vectan Tubal 5000<<locked>>80%26,107 psi73%1955 fps96%
Vihtavuori N135<<locked>>80%27,122 psi76%2051 fps98.3%
Vihtavuori N140<<locked>>80%28,529 psi80%2054 fps96.3%
Vihtavuori N540<<locked>>80%27,282 psi77%2037 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

This overview compares 12 powders for 6.5 x 52 R loaded with the .257 | 122gr | Remington SP Extended-Range. Accurate 4064 delivers the highest muzzle velocity at 2,195 fps; across all powders the maximum-charge window runs from 1,430 fps to 2,195 fps. Hodgdon TrailBoss gives the best case fill at 96 %, and 12 of the 12 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (245 MPa), the top charges use 85–90 %, leaving at least 10 % headroom. The 122.0 gr projectile in 0.257" calls for a 1:12.5 twist; slower twists will usually not stabilise this weight. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for 6.5 x 52 R with the .257 | 122gr | Remington SP Extended-Range they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data