Load data for 6.5 x 52 R + .257 | 110gr | Nosler AccuBond

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.257 \| 110gr \| Nosler AccuBond
Manufacturer SKU:	53742
Bullet Weight:	110gr \| 7.1g
Bullet Diameter:	0.257" \| 6.53mm
Bullet Length:	1.195" \| 30.4mm
Caliber:	6.5 x 52 R load data
Case Length (l3):	2.047" \| 52.0mm
Cartridge Length (C.O.L.):	2.502" \| 63.5mm
Seated Depth:	0.740" \| 18.8mm
Shank Seated Depth:	0.665" \| 16.9mm
Case Capacity:	37.0 Grains of Water \| 2.40 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	35534 psi \| 2450 bar
LID:	LID_B4003_C1008
Last updated:	2025-01-01
Recommended Twist Rate:	1:9 - 1:8

Load data for 40 loads in caliber 6.5 x 52 R with .257 | 110gr | Nosler AccuBond bullet and 20 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2495	<<locked>>	89%	31560	89%	**77	98%
[Accurate 2520]*	<<locked>>	87%	31299	88%	**44	94%
Accurate 4064	<<locked>>	95%	31908	90%	**77	96%
Alliant AR-Comp	<<locked>>	86%	31386	88%	**54	100%
IMR 3031	<<locked>>	90%	31140	88%	**54	97%
[Lovex D073.6]*	<<locked>>	89%	31908	90%	**57	94%
[Lovex S062]*	<<locked>>	91%	31720	89%	**11	92%
Norma 202	<<locked>>	87%	31952	90%	**24	95%
Rottweil R 901	<<locked>>	83%	31807	90%	**82	95%
[Rottweil R 902]*	<<locked>>	89%	31749	89%	**88	92%
SNPE Vectan Tubal 3000	<<locked>>	84%	31357	88%	**26	95%
SNPE Vectan Tubal 5000	<<locked>>	92%	31879	90%	**59	96%
[Shooters World Match Rifle]*	<<locked>>	89%	31908	90%	**57	94%
[Shooters World Precision]*	<<locked>>	91%	31720	89%	**11	92%
Somchem S335	<<locked>>	85%	31227	88%	**49	96%
Vihtavuori N133	<<locked>>	87%	31430	88%	**52	98%
Vihtavuori N135	<<locked>>	96%	30676	86%	**08	97%
Vihtavuori N140	<<locked>>	88%	30966	87%	**85	95%
[Vihtavuori N540]*	<<locked>>	89%	31386	88%	**15	94%
[Winchester 748]*	<<locked>>	83%	31865	90%	**34	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2495	<<locked>>	81%	24540	69%	**00	95%
[Accurate 2520]*	<<locked>>	81%	25802	73%	**00	91%
[Accurate 4064]*	<<locked>>	82%	21611	61%	**01	90%
Alliant AR-Comp	<<locked>>	81%	26818	75%	**39	99%
[IMR 3031]*	<<locked>>	81%	23685	67%	**44	93%
[Lovex D073.6]*	<<locked>>	82%	25251	71%	**90	91%
[Lovex S062]*	<<locked>>	88%	29385	83%	**52	90%
[Norma 202]*	<<locked>>	81%	26339	74%	**83	92%
[Rottweil R 901]*	<<locked>>	81%	29675	83%	**26	94%
[Rottweil R 902]*	<<locked>>	86%	29240	82%	**23	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	81%	28892	81%	**70	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	81%	23511	66%	**42	92%
[Shooters World Match Rifle]*	<<locked>>	82%	25251	71%	**90	91%
[Shooters World Precision]*	<<locked>>	88%	29385	83%	**52	90%
[Somchem S335]*	<<locked>>	81%	27876	78%	**70	94%
Vihtavuori N133	<<locked>>	81%	26818	75%	**44	96%
[Vihtavuori N135]*	<<locked>>	81%	20131	57%	**00	91%
[Vihtavuori N140]*	<<locked>>	81%	24497	69%	**14	91%
[Vihtavuori N540]*	<<locked>>	81%	24149	68%	**21	90%
[Winchester 748]*	<<locked>>	81%	29501	83%	**78	91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data