Load data for 6.5 x 52 R K&S + .264 | 90gr | Impala LWHV LS

6.5 x 52 R K&S cartridge drawing
Impala Bullets logo

Load Specifications

Bullet Manufacturer:Impala Bullets
Bullet Weight:90 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):2.02"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:47 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:47,137 psi
Recommended Twist Rate:1:8.5

Load data in caliber 6.5 x 52 R K&S with .264 | 90gr | Impala LWHV LS bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are IMR 3031, Alliant AR-Comp and Accurate 4064.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>86%41,756 psi89%2822 fps99.4%
Accurate 2460<<locked>>82%40,422 psi86%2808 fps96.9%
Accurate 2495<<locked>>92%41,075 psi87%2871 fps99.6%
Accurate 2520<<locked>>86%40,306 psi86%2851 fps96.5%
Accurate 4064<<locked>>94%40,727 psi86%2884 fps97.8%
Alliant AR-Comp<<locked>>88%40,727 psi86%2897 fps100%
Alliant Reloder-10x<<locked>>82%42,047 psi89%2844 fps99.9%
Hodgdon H322<<locked>>82%40,248 psi85%2841 fps98.1%
Hodgdon H335<<locked>>82%40,872 psi87%2854 fps97.3%
Hodgdon TrailBossᴾ<<locked>>100%33,924 psi72%1877 fps100%
IMR 3031<<locked>>90%41,452 psi88%2930 fps99.1%
IMR 4198<<locked>>82%42,598 psi90%2818 fps100%
Lovex D073.6<<locked>>90%41,031 psi87%2881 fps96.7%
Norma 202<<locked>>90%42,337 psi90%2881 fps97.7%
ReloadSwiss RS 14ᴾ<<locked>>100%33,968 psi72%1916 fps100%
ReloadSwiss RS 40<<locked>>82%40,118 psi85%2808 fps96%
Rottweil R 901<<locked>>86%42,105 psi89%2831 fps97.3%
Shooters World Match Rifle<<locked>>90%41,031 psi87%2881 fps96.7%
SNPE Vectan SP 3<<locked>>82%42,206 psi90%2844 fps99.1%
SNPE Vectan Tubal 3000<<locked>>88%42,322 psi90%2789 fps97.6%
SNPE Vectan Tubal 5000<<locked>>94%40,959 psi87%2779 fps98.3%
Somchem S335<<locked>>88%41,669 psi88%2795 fps98.2%
Vihtavuori N130<<locked>>84%42,467 psi90%2795 fps99.8%
Vihtavuori N133<<locked>>88%41,771 psi89%2795 fps99.4%
Vihtavuori N135<<locked>>92%40,683 psi86%2858 fps99.5%
Vihtavuori N140<<locked>>92%42,395 psi90%2861 fps98%
Vihtavuori N540<<locked>>92%41,002 psi87%2844 fps97.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>80%35,186 psi75%2674 fps98.3%
Accurate 2460<<locked>>80%37,855 psi80%2753 fps96.2%
Accurate 2495<<locked>>80%28,790 psi61%2566 fps96.7%
Accurate 2520<<locked>>84%37,710 psi80%2792 fps95.7%
Accurate 406431.1 gr86%32,155 psi68%2674 fps95.1%
Alliant AR-Comp28.6 gr80%31,923 psi68%2687 fps99.5%
Alliant Reloder-10x<<locked>>80%39,653 psi84%2792 fps99.7%
Hodgdon H322<<locked>>80%37,913 psi80%2789 fps97.5%
Hodgdon H335<<locked>>80%38,319 psi81%2795 fps96.6%
Hodgdon TrailBoss<<locked>>80%25,295 psi54%1680 fps100%
IMR 303128.6 gr80%30,763 psi65%2654 fps96%
IMR 4198<<locked>>80%40,480 psi86%2776 fps100%
Lovex D073.6<<locked>>86%36,230 psi77%2769 fps95.2%
Norma 202<<locked>>84%35,375 psi75%2723 fps95.7%
ReloadSwiss RS 14<<locked>>80%25,454 psi54%1719 fps100%
ReloadSwiss RS 40<<locked>>80%37,884 psi80%2756 fps95.2%
Rottweil R 901<<locked>>80%35,723 psi76%2680 fps95.4%
Shooters World Match Rifle<<locked>>86%36,230 psi77%2769 fps95.2%
SNPE Vectan SP 3<<locked>>80%39,798 psi84%2795 fps98.7%
SNPE Vectan Tubal 3000<<locked>>82%35,578 psi75%2635 fps95.6%
SNPE Vectan Tubal 5000<<locked>>84%30,719 psi65%2533 fps95.1%
Somchem S335<<locked>>80%33,199 psi70%2595 fps95.9%
Vihtavuori N130<<locked>>80%37,797 psi80%2697 fps99.4%
Vihtavuori N133<<locked>>80%33,127 psi70%2598 fps97.6%
Vihtavuori N135<<locked>>80%28,558 psi61%2556 fps96.4%
Vihtavuori N140<<locked>>84%33,547 psi71%2654 fps95.5%
Vihtavuori N540<<locked>>86%34,156 psi72%2684 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 6.5 x 52 R K&S loaded with the .264 | 90gr | Impala LWHV LS. IMR 3031 delivers the highest muzzle velocity at 2,930 fps; across all powders the maximum-charge window runs from 1,877 fps to 2,930 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (325 MPa), the top charges use 72–90 %, leaving at least 10 % headroom. The 90.0 gr projectile in 0.264" calls for a 1:8.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. IMR 3031, Alliant AR-Comp, Accurate 4064 rank at the top here: for 6.5 x 52 R K&S with the .264 | 90gr | Impala LWHV LS they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data