top of page

Load data for 6.5 x 51 R Jap. Arisaka + .264 | 140gr | Barnes X S

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): Alliant Reloder-23, Somchem S365

6.5 x 51 R Jap. Arisaka + .264 | 140gr | Barnes X S

Load Specifications

Bullet:
.264 | 140gr | Barnes X S
Manufacturer SKU:
26405
Bullet Weight:
140gr | 9.1g
Bullet Diameter:
0.264" | 6.71mm
Bullet Length:
1.335" | 33.9mm
Caliber:
6.5 x 51 R Jap. Arisaka
Case Length (l3):
2.007" | 51.0mm
Cartridge Length (C.O.L.):
2.945" | 74.8mm
Seated Depth:
0.397" | 10.1mm
Shank Seated Depth:
0.397" | 10.1mm
Case Capacity:
45.0 Grains of Water | 2.92 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
42786 psi | 2950 bar
LID:
LID_B520_C1006

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 58 loads in caliber 6.5 x 51 R Jap. Arisaka with .264 | 140gr | Barnes X S bullet and 29 powders such as Alliant Reloder-23, Somchem S365. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate 3100
<<locked>>
95%
38101
89%
**00
95%
Accurate 4350
<<locked>>
85%
37710
88%
**03
97%
Alliant Reloder-16
<<locked>>
86%
38087
89%
**23
97%
Alliant Reloder-23 👍
<<locked>>
97%
37855
88%
**49
99%
[Alliant Reloder-25]*
<<locked>>
96%
33678
79%
**47
93%
Alliant Reloder-26
<<locked>>
94%
37971
89%
**05
96%
[Hodgdon H4350]*
<<locked>>
87%
37869
89%
**44
93%
Hodgdon Hybrid 100V
<<locked>>
89%
38508
90%
**93
99%
Hodgdon LVR
<<locked>>
83%
38232
89%
**00
96%
[Hodgdon Superperformance]*
<<locked>>
85%
38247
89%
**23
93%
[IMR 4350]*
<<locked>>
85%
37753
88%
**41
93%
IMR 4831
<<locked>>
90%
37710
88%
**90
97%
[Lovex S070]*
<<locked>>
84%
38000
89%
**47
94%
[Lovex S071]*
<<locked>>
96%
33489
78%
**01
93%
[Norma MRP]*
<<locked>>
93%
37550
88%
**56
93%
Norma URP
<<locked>>
86%
38450
90%
**20
97%
Ramshot Hunter
<<locked>>
87%
38014
89%
**10
95%
ReloadSwiss RS 60
<<locked>>
84%
38406
90%
**72
99%
ReloadSwiss RS 62
<<locked>>
87%
38464
90%
**46
97%
ReloadSwiss RS 70
<<locked>>
87%
38479
90%
**52
96%
[Rottweil R 905]*
<<locked>>
91%
37608
88%
**97
91%
Somchem S365 👍
<<locked>>
89%
38348
90%
**56
100%
[Somchem S385]*
<<locked>>
91%
37855
88%
**80
93%
Vihtavuori N150
<<locked>>
84%
38203
89%
**34
99%
Vihtavuori N160
<<locked>>
83%
38348
90%
**77
97%
[Vihtavuori N165]*
<<locked>>
96%
37536
88%
**57
92%
Vihtavuori N555
<<locked>>
94%
37695
88%
**56
98%
Winchester 6.5 StaBALL
<<locked>>
85%
38319
90%
**67
99%
Winchester StaBALL HD
<<locked>>
96%
34011
80%
**49
98%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 3100]*
<<locked>>
84%
27470
64%
**57
90%
Accurate 4350
<<locked>>
81%
33156
78%
**05
95%
Alliant Reloder-16
<<locked>>
81%
32793
77%
**01
95%
[Alliant Reloder-23]*
<<locked>>
81%
25019
58%
**05
92%
[Alliant Reloder-25]*
<<locked>>
92%
30052
70%
**46
90%
[Alliant Reloder-26]*
<<locked>>
83%
27499
64%
**23
90%
[Hodgdon H4350]*
<<locked>>
81%
32184
75%
**13
90%
Hodgdon Hybrid 100V
<<locked>>
81%
30676
72%
**23
96%
Hodgdon LVR
<<locked>>
81%
35462
83%
**41
95%
[Hodgdon Superperformance]*
<<locked>>
81%
34055
80%
**28
91%
[IMR 4350]*
<<locked>>
81%
33649
79%
**49
91%
[IMR 4831]*
<<locked>>
81%
29515
69%
**03
94%
[Lovex S070]*
<<locked>>
81%
35346
83%
**88
93%
[Lovex S071]*
<<locked>>
89%
27470
64%
**57
90%
[Norma MRP]*
<<locked>>
88%
32735
77%
**41
90%
Norma URP
<<locked>>
81%
33127
77%
**01
95%
[Ramshot Hunter]*
<<locked>>
81%
32314
76%
**78
92%
ReloadSwiss RS 60
<<locked>>
81%
35621
83%
**10
99%
ReloadSwiss RS 62
<<locked>>
81%
32430
76%
**11
95%
[ReloadSwiss RS 70]*
<<locked>>
81%
32663
76%
**08
93%
[Rottweil R 905]*
<<locked>>
89%
34925
82%
**34
90%
Somchem S365
<<locked>>
81%
30023
70%
**62
98%
[Somchem S385]*
<<locked>>
85%
31807
74%
**46
90%
Vihtavuori N150
<<locked>>
81%
34708
81%
**62
99%
Vihtavuori N160
<<locked>>
81%
35549
83%
**21
96%
[Vihtavuori N165]*
<<locked>>
93%
34098
80%
**78
90%
[Vihtavuori N555]*
<<locked>>
81%
26600
62%
**73
93%
Winchester 6.5 StaBALL
<<locked>>
81%
34243
80%
**78
98%
[Winchester StaBALL HD]*
<<locked>>
83%
23859
56%
**11
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page