Load data for 6.5 Creedmoor + .264 | 140gr | Hornady A-MAX

6.5 Creedmoor cartridge drawing
Hornady logo

Load Specifications

Bullet Manufacturer:Hornady
Bullet Weight:140 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):1.92"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:52.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:63,091 psi
Recommended Twist Rate:1:9.0

Load data in caliber 6.5 Creedmoor with .264 | 140gr | Hornady A-MAX bullet and 1 powder. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Alliant Power Pro Varmintᴾ<<locked>>100%50,589 psi80%2657 fps96.4%

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Alliant Power Pro Varmint<<locked>>98%47,311 psi75%2602 fps95.6%

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 1 powders for 6.5 Creedmoor loaded with the .264 | 140gr | Hornady A-MAX. Alliant Power Pro Varmint delivers the highest muzzle velocity at 2,657 fps; across all powders the maximum-charge window runs from 2,657 fps to 2,657 fps. Alliant Power Pro Varmint gives the best case fill at 100 %, and 1 of the 1 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (435 MPa), the top charges use 80–80 %, leaving at least 20 % headroom. The 140.0 gr projectile in 0.264" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Alliant Power Pro Varmint reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data