top of page

Load data for 6 x 70 R + .243 | 95gr | Rhino Solid Shank

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

6 x 70 R + .243 | 95gr | Rhino Solid Shank

Load Specifications

Bullet:
.243 | 95gr | Rhino Solid Shank
Bullet Weight:
95gr | 6.2g
Bullet Diameter:
0.243" | 6.17mm
Bullet Length:
0.973" | 24.7mm
Caliber:
6 x 70 R
Case Length (l3):
2.750" | 69.8mm
Cartridge Length (C.O.L.):
3.374" | 85.7mm
Seated Depth:
0.349" | 8.9mm
Shank Seated Depth:
0.349" | 8.9mm
Case Capacity:
39.9 Grains of Water | 2.59 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
37710 psi | 2600 bar
LID:
LID_B5219_C972

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 26 loads in caliber 6 x 70 R with .243 | 95gr | Rhino Solid Shank bullet and 13 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 4350]*
<<locked>>
91%
33054
88%
**74
92%
[Alliant Reloder-17]*
<<locked>>
86%
33504
89%
**90
94%
[Hodgdon Hybrid 100V]*
<<locked>>
93%
33098
88%
**31
94%
[IMR 4831]*
<<locked>>
96%
33620
89%
**64
92%
ReloadSwiss RS 14
<<locked>>
95%
32677
87%
**03
100%
ReloadSwiss RS 60
<<locked>>
87%
33750
89%
**00
95%
Rottweil R 903
<<locked>>
85%
33301
88%
**34
95%
Somchem S355
<<locked>>
84%
33881
90%
**34
95%
Somchem S365
<<locked>>
94%
33446
89%
**97
96%
Vihtavuori N135
<<locked>>
85%
33721
89%
**15
100%
Vihtavuori N150
<<locked>>
89%
33228
88%
**02
96%
[Vihtavuori N550]*
<<locked>>
87%
33402
89%
**57
92%
[Winchester 6.5 StaBALL]*
<<locked>>
88%
32938
87%
**85
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 4350]*
<<locked>>
88%
30037
80%
**92
90%
[Alliant Reloder-17]*
<<locked>>
81%
28137
75%
**29
90%
[Hodgdon Hybrid 100V]*
<<locked>>
86%
26919
71%
**57
90%
[IMR 4831]*
<<locked>>
92%
29820
79%
**65
90%
ReloadSwiss RS 14
<<locked>>
90%
30153
80%
**50
100%
[ReloadSwiss RS 60]*
<<locked>>
81%
27485
73%
**10
90%
[Rottweil R 903]*
<<locked>>
81%
29327
78%
**33
93%
[Somchem S355]*
<<locked>>
81%
31053
82%
**62
94%
[Somchem S365]*
<<locked>>
85%
24903
66%
**44
90%
Vihtavuori N135
<<locked>>
81%
29675
79%
**20
99%
[Vihtavuori N150]*
<<locked>>
81%
25976
69%
**08
93%
[Vihtavuori N550]*
<<locked>>
85%
30516
81%
**85
90%
[Winchester 6.5 StaBALL]*
<<locked>>
82%
27180
72%
**24
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page