
Load Specifications
Load data in caliber 6 x 70 R with .243 | 95gr | Hornady SST bullet and 11 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 25.6"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2495 | <<locked>> | 82% | 33,779 psi | 90% | 2457 fps | 99.9% |
| Accurate 4064 | <<locked>> | 84% | 34,011 psi | 90% | 2484 fps | 98.9% |
| Hodgdon TrailBoss | <<locked>> | 98% | 33,098 psi | 88% | 1677 fps | 100% |
| Lovex S062 | <<locked>> | 82% | 33,562 psi | 89% | 2434 fps | 96.1% |
| ReloadSwiss RS 14 | <<locked>> | 98% | 33,315 psi | 88% | 1716 fps | 100% |
| ReloadSwiss RS 60 | <<locked>> | 86% | 33,170 psi | 88% | 2530 fps | 97% |
| Shooters World Precision | <<locked>> | 82% | 33,562 psi | 89% | 2434 fps | 96.1% |
| SNPE Vectan Tubal 5000 | <<locked>> | 84% | 34,084 psi | 90% | 2392 fps | 99.2% |
| Somchem S365 | <<locked>> | 96% | 33,489 psi | 89% | 2536 fps | 96.3% |
| Vihtavuori N150 | <<locked>> | 86% | 32,329 psi | 86% | 2408 fps | 96.2% |
| Vihtavuori N540 | <<locked>> | 82% | 34,011 psi | 90% | 2448 fps | 98.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 25.6"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2495 | <<locked>> | 80% | 31,328 psi | 83% | 2405 fps | 99.7% |
| Accurate 4064 | <<locked>> | 80% | 29,660 psi | 79% | 2382 fps | 97.7% |
| Hodgdon TrailBoss | <<locked>> | 80% | 25,266 psi | 67% | 1516 fps | 100% |
| Lovex S062 | <<locked>> | 80% | 31,546 psi | 84% | 2385 fps | 95.3% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 25,556 psi | 68% | 1555 fps | 100% |
| ReloadSwiss RS 60 | <<locked>> | 84% | 31,270 psi | 83% | 2474 fps | 96.1% |
| Shooters World Precision | <<locked>> | 80% | 31,546 psi | 84% | 2385 fps | 95.3% |
| SNPE Vectan Tubal 5000 | <<locked>> | 80% | 30,023 psi | 80% | 2300 fps | 98.3% |
| Somchem S365 | <<locked>> | 94% | 31,531 psi | 84% | 2484 fps | 95.4% |
| Vihtavuori N150 | <<locked>> | 84% | 30,371 psi | 81% | 2359 fps | 95.4% |
| Vihtavuori N540 | <<locked>> | 80% | 31,691 psi | 84% | 2392 fps | 97.7% |
Recommended = one of the top powders for this cartridge and bullet combination.
This overview compares 11 powders for 6 x 70 R loaded with the .243 | 95gr | Hornady SST. Somchem S365 delivers the highest muzzle velocity at 2,536 fps; across all powders the maximum-charge window runs from 1,677 fps to 2,536 fps. Hodgdon TrailBoss gives the best case fill at 98 %, and 11 of the 11 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (260 MPa), the top charges use 86–90 %, leaving at least 10 % headroom. The 95.0 gr projectile in 0.243" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for 6 x 70 R with the .243 | 95gr | Hornady SST they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.