Load data for 6 x 70 R + .243 | 87gr | Berger VLD Hunting

6 x 70 R cartridge drawing
Berger logo

Load Specifications

Bullet Manufacturer:Berger
Bullet Weight:87 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.75"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:39.9 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:37,710 psi
Recommended Twist Rate:1:9.5

Load data in caliber 6 x 70 R with .243 | 87gr | Berger VLD Hunting bullet and 9 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>82%32,068 psi85%2533 fps99.5%
Accurate 4064<<locked>>84%32,227 psi85%2552 fps97.8%
Hodgdon TrailBossᴾ<<locked>>100%33,721 psi89%1778 fps100%
ReloadSwiss RS 14<<locked>>98%33,025 psi88%1804 fps100%
ReloadSwiss RS 60<<locked>>88%34,113 psi90%2654 fps96.3%
SNPE Vectan Tubal 5000<<locked>>84%32,706 psi87%2467 fps98.4%
Vihtavuori N135<<locked>>82%32,590 psi86%2536 fps99.5%
Vihtavuori N140<<locked>>82%33,620 psi89%2533 fps98%
Vihtavuori N540<<locked>>82%32,474 psi86%2516 fps97.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%29,805 psi79%2477 fps99.1%
Accurate 4064<<locked>>80%28,166 psi75%2448 fps96.3%
Hodgdon TrailBoss8.8 gr80%25,280 psi67%1598 fps100%
ReloadSwiss RS 148.9 gr80%25,121 psi67%1631 fps100%
ReloadSwiss RS 60<<locked>>86%31,908 psi85%2592 fps95.2%
SNPE Vectan Tubal 5000<<locked>>80%28,921 psi77%2372 fps97.2%
Vihtavuori N135<<locked>>80%30,560 psi81%2487 fps99.2%
Vihtavuori N140<<locked>>80%31,618 psi84%2484 fps97.4%
Vihtavuori N540<<locked>>80%30,298 psi80%2464 fps96.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 9 powders for 6 x 70 R loaded with the .243 | 87gr | Berger VLD Hunting. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,654 fps; across all powders the maximum-charge window runs from 1,778 fps to 2,654 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 9 of the 9 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (260 MPa), the top charges use 85–90 %, leaving at least 10 % headroom. The 87.0 gr projectile in 0.243" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for 6 x 70 R with the .243 | 87gr | Berger VLD Hunting they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data