Load data for 6 x 70 R + .243 | 85gr | Rhino Solid Shank

6 x 70 R cartridge drawing
Rhino Bullets logo

Load Specifications

Bullet Manufacturer:Rhino Bullets
Bullet Weight:85 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.75"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:39.9 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:37,710 psi
Recommended Twist Rate:1:12.0

Load data in caliber 6 x 70 R with .243 | 85gr | Rhino Solid Shank bullet and 8 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>82%33,141 psi88%2595 fps99.7%
Accurate 4064<<locked>>84%33,533 psi89%2625 fps98.2%
Hodgdon TrailBoss<<locked>>98%32,982 psi87%1804 fps100%
ReloadSwiss RS 14<<locked>>98%33,504 psi89%1854 fps100%
SNPE Vectan Tubal 5000<<locked>>84%33,605 psi89%2530 fps98.6%
Vihtavuori N135<<locked>>82%33,692 psi89%2602 fps99.7%
Vihtavuori N150<<locked>>88%33,997 psi90%2592 fps96%
Vihtavuori N540<<locked>>82%33,533 psi89%2582 fps97.6%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>80%30,893 psi82%2543 fps99.3%
Accurate 4064<<locked>>80%29,211 psi77%2513 fps96.8%
Hodgdon TrailBoss9.2 gr80%25,324 psi67%1637 fps100%
ReloadSwiss RS 149.4 gr80%25,527 psi68%1677 fps100%
SNPE Vectan Tubal 5000<<locked>>80%29,849 psi79%2438 fps97.6%
Vihtavuori N135<<locked>>80%31,720 psi84%2556 fps99.4%
Vihtavuori N150<<locked>>86%32,082 psi85%2546 fps95.3%
Vihtavuori N540<<locked>>80%31,372 psi83%2530 fps96.9%

Recommended = one of the top powders for this cartridge and bullet combination.

This overview compares 8 powders for 6 x 70 R loaded with the .243 | 85gr | Rhino Solid Shank. Accurate 4064 delivers the highest muzzle velocity at 2,625 fps; across all powders the maximum-charge window runs from 1,804 fps to 2,625 fps. Hodgdon TrailBoss gives the best case fill at 98 %, and 8 of the 8 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (260 MPa), the top charges use 87–90 %, leaving at least 10 % headroom. The 85.0 gr projectile in 0.243" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for 6 x 70 R with the .243 | 85gr | Rhino Solid Shank they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data