Load data for 6 x 70 R + .243 | 69gr | SUS-TAC HPPT

6 x 70 R cartridge drawing
SUS-TAC logo

Load Specifications

Bullet Manufacturer:SUS-TAC
Bullet Weight:69 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.75"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:39.9 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:37,710 psi
Recommended Twist Rate:1:9.0

Load data in caliber 6 x 70 R with .243 | 69gr | SUS-TAC HPPT bullet and 10 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N135, Accurate 2495 and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>82%33,402 psi89%2779 fps97.8%
Accurate 2495<<locked>>90%33,446 psi89%2848 fps98.3%
Alliant AR-Comp<<locked>>84%32,547 psi86%2851 fps99.6%
Hodgdon TrailBossᴾ<<locked>>100%32,590 psi86%1978 fps100%
IMR 3031<<locked>>86%33,185 psi88%2874 fps96.9%
ReloadSwiss RS 14ᴾ<<locked>>100%32,503 psi86%2021 fps100%
SNPE Vectan Tubal 5000<<locked>>90%33,083 psi88%2733 fps96%
Somchem S335<<locked>>84%33,446 psi89%2746 fps95.9%
Vihtavuori N133<<locked>>84%33,866 psi90%2759 fps97.8%
Vihtavuori N135<<locked>>88%32,213 psi85%2805 fps97.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>80%31,053 psi82%2717 fps97%
Accurate 249526.2 gr82%25,324 psi67%2615 fps95%
Alliant AR-Comp<<locked>>80%28,485 psi76%2733 fps98.6%
Hodgdon TrailBoss<<locked>>80%24,018 psi64%1772 fps100%
IMR 3031<<locked>>82%29,066 psi77%2749 fps95.1%
ReloadSwiss RS 149 gr80%24,062 psi64%1818 fps100%
SNPE Vectan Tubal 5000<<locked>>88%31,169 psi83%2680 fps95.3%
Somchem S335<<locked>>82%31,227 psi83%2687 fps95%
Vihtavuori N133<<locked>>80%29,965 psi79%2657 fps96.5%
Vihtavuori N13525.4 gr82%26,687 psi71%2644 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 10 powders for 6 x 70 R loaded with the .243 | 69gr | SUS-TAC HPPT. IMR 3031 delivers the highest muzzle velocity at 2,874 fps; across all powders the maximum-charge window runs from 1,978 fps to 2,874 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 10 of the 10 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (260 MPa), the top charges use 85–90 %, leaving at least 10 % headroom. The 69.0 gr projectile in 0.243" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N135, Accurate 2495, ReloadSwiss RS 14 rank at the top here: for 6 x 70 R with the .243 | 69gr | SUS-TAC HPPT they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data