Load data for 6 x 70 R + .243 | 66gr | SUS-TAC HPT

6 x 70 R cartridge drawing
SUS-TAC logo

Load Specifications

Bullet Manufacturer:SUS-TAC
Bullet Weight:66 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.75"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:39.9 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:37,710 psi
Recommended Twist Rate:1:9.5

Load data in caliber 6 x 70 R with .243 | 66gr | SUS-TAC HPT bullet and 8 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Accurate 2495, Vihtavuori N135 and ReloadSwiss RS 14.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>82%32,605 psi86%2818 fps97.2%
Accurate 2495<<locked>>90%32,692 psi87%2884 fps97.8%
Alliant AR-Comp<<locked>>84%32,126 psi85%2897 fps99.3%
Hodgdon TrailBossᴾ<<locked>>100%32,460 psi86%2028 fps100%
IMR 3031<<locked>>86%32,677 psi87%2913 fps96.3%
ReloadSwiss RS 14ᴾ<<locked>>100%32,329 psi86%2070 fps100%
Vihtavuori N133<<locked>>84%33,489 psi89%2808 fps97.4%
Vihtavuori N135<<locked>>90%34,011 psi90%2907 fps97.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>80%30,661 psi81%2762 fps96.5%
Accurate 249527.4 gr84%26,789 psi71%2717 fps95.4%
Alliant AR-Comp<<locked>>80%28,137 psi75%2776 fps98.1%
Hodgdon TrailBoss<<locked>>80%24,047 psi64%1821 fps100%
IMR 3031<<locked>>84%30,458 psi81%2848 fps95.3%
ReloadSwiss RS 149.2 gr80%24,062 psi64%1867 fps100%
Vihtavuori N133<<locked>>80%29,341 psi78%2694 fps95.8%
Vihtavuori N13526.5 gr84%28,007 psi74%2740 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 8 powders for 6 x 70 R loaded with the .243 | 66gr | SUS-TAC HPT. IMR 3031 delivers the highest muzzle velocity at 2,913 fps; across all powders the maximum-charge window runs from 2,028 fps to 2,913 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 8 of the 8 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (260 MPa), the top charges use 85–90 %, leaving at least 10 % headroom. The 66.0 gr projectile in 0.243" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Accurate 2495, Vihtavuori N135, ReloadSwiss RS 14 rank at the top here: for 6 x 70 R with the .243 | 66gr | SUS-TAC HPT they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data