Load data for 6 x 70 R + .243 | 108gr | Hornady ELD Match

6 x 70 R cartridge drawing
Hornady logo

Load Specifications

Bullet Manufacturer:Hornady
Bullet Weight:108 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.75"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:39.9 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:25.6"
Max. allowed Pressure:37,710 psi
Recommended Twist Rate:1:8.5

Load data in caliber 6 x 70 R with .243 | 108gr | Hornady ELD Match bullet and 11 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Somchem S365, ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Alliant Reloder- TS 15.5<<locked>>82%33,359 psi88%2310 fps96.8%
Bofors RP3<<locked>>82%32,750 psi87%2310 fps96.8%
Hodgdon TrailBoss<<locked>>98%33,663 psi89%1565 fps100%
ReloadSwiss RS 14<<locked>>98%33,997 psi90%1601 fps100%
ReloadSwiss RS 60<<locked>>84%33,156 psi88%2385 fps98.4%
Rottweil R 903<<locked>>84%33,025 psi88%2306 fps96.5%
SNPE Vectan Tubal 5000<<locked>>82%34,084 psi90%2234 fps99.7%
Somchem S355<<locked>>84%34,113 psi90%2316 fps96.6%
Somchem S365<<locked>>94%33,475 psi89%2388 fps97.8%
Vihtavuori N150<<locked>>84%32,532 psi86%2260 fps97.5%
Winchester 6.5 StaBALL<<locked>>88%33,344 psi88%2283 fps96.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 25.6"

PowderChargeFRMaxP%V(0)z
Alliant Reloder- TS 15.5<<locked>>80%31,241 psi83%2260 fps96.1%
Bofors RP3<<locked>>80%30,676 psi81%2260 fps96%
Hodgdon TrailBoss8.2 gr80%25,846 psi69%1414 fps100%
ReloadSwiss RS 148.3 gr80%25,817 psi68%1444 fps100%
ReloadSwiss RS 60<<locked>>80%29,022 psi77%2270 fps96.6%
Rottweil R 903<<locked>>82%30,966 psi82%2260 fps95.8%
SNPE Vectan Tubal 5000<<locked>>80%31,923 psi85%2192 fps99.4%
Somchem S355<<locked>>80%29,994 psi80%2221 fps95%
Somchem S36526.5 gr88%27,789 psi74%2241 fps95.1%
Vihtavuori N150<<locked>>80%28,514 psi76%2169 fps96%
Winchester 6.5 StaBALL<<locked>>86%31,125 psi83%2228 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

This overview compares 11 powders for 6 x 70 R loaded with the .243 | 108gr | Hornady ELD Match. Somchem S365 delivers the highest muzzle velocity at 2,388 fps; across all powders the maximum-charge window runs from 1,565 fps to 2,388 fps. Hodgdon TrailBoss gives the best case fill at 98 %, and 11 of the 11 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (260 MPa), the top charges use 86–90 %, leaving at least 10 % headroom. The 108.0 gr projectile in 0.243" calls for a 1:8.5 twist; slower twists will usually not stabilise this weight. Somchem S365, ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for 6 x 70 R with the .243 | 108gr | Hornady ELD Match they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data