
Load Specifications
Load data in caliber 6 x 70 R with .243 | 105gr | Speer RN bullet and 10 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Somchem S365, ReloadSwiss RS 14 and Hodgdon TrailBoss.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 25.6"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Alliant Reloder-17 | <<locked>> | 84% | 33,475 psi | 89% | 2448 fps | 96.5% |
| Alliant Reloder-23 | <<locked>> | 98% | 32,851 psi | 87% | 2431 fps | 96.1% |
| Hodgdon Hybrid 100V | <<locked>> | 90% | 32,880 psi | 87% | 2375 fps | 96.4% |
| Hodgdon TrailBoss | <<locked>> | 96% | 32,880 psi | 87% | 1611 fps | 100% |
| ReloadSwiss RS 14 | <<locked>> | 96% | 33,605 psi | 89% | 1657 fps | 100% |
| ReloadSwiss RS 60 | <<locked>> | 82% | 33,402 psi | 89% | 2457 fps | 98.8% |
| Rottweil R 903 | <<locked>> | 82% | 33,620 psi | 89% | 2382 fps | 97.1% |
| Somchem S365 | <<locked>> | 90% | 31,923 psi | 85% | 2415 fps | 97.6% |
| Vihtavuori N150 | <<locked>> | 82% | 32,953 psi | 87% | 2329 fps | 97.9% |
| Winchester 6.5 StaBALL | <<locked>> | 86% | 33,605 psi | 89% | 2356 fps | 96.7% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 25.6"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Alliant Reloder-17 | <<locked>> | 82% | 31,343 psi | 83% | 2388 fps | 95.5% |
| Alliant Reloder-23 | <<locked>> | 96% | 30,806 psi | 82% | 2375 fps | 95.1% |
| Hodgdon Hybrid 100V | <<locked>> | 88% | 31,038 psi | 82% | 2329 fps | 95.6% |
| Hodgdon TrailBoss | 9 gr | 80% | 26,150 psi | 69% | 1476 fps | 100% |
| ReloadSwiss RS 14 | 9.1 gr | 80% | 26,121 psi | 69% | 1506 fps | 100% |
| ReloadSwiss RS 60 | <<locked>> | 80% | 31,241 psi | 83% | 2402 fps | 98.1% |
| Rottweil R 903 | <<locked>> | 80% | 31,328 psi | 83% | 2326 fps | 96.2% |
| Somchem S365 | 27.8 gr | 84% | 26,629 psi | 71% | 2267 fps | 95% |
| Vihtavuori N150 | <<locked>> | 80% | 30,705 psi | 81% | 2280 fps | 97.2% |
| Winchester 6.5 StaBALL | <<locked>> | 84% | 31,270 psi | 83% | 2297 fps | 95.7% |
Recommended = one of the top powders for this cartridge and bullet combination.
This overview compares 10 powders for 6 x 70 R loaded with the .243 | 105gr | Speer RN. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,457 fps; across all powders the maximum-charge window runs from 1,611 fps to 2,457 fps. Alliant Reloder-23 gives the best case fill at 98 %, and 10 of the 10 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (260 MPa), the top charges use 85–89 %, leaving at least 11 % headroom. The 105.0 gr projectile in 0.243" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. Somchem S365, ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for 6 x 70 R with the .243 | 105gr | Speer RN they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.