
Load Specifications
Load data in caliber 6 x 52 R Bretschneider with .243 | 75gr | Reichenberg Spezial Jagd bullet and 35 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are IMR 3031, Alliant AR-Comp and Norma 202.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 92% | 43,207 psi | 90% | 2841 fps | 99.4% |
| Accurate 2460 | <<locked>> | 88% | 41,539 psi | 87% | 2825 fps | 96.8% |
| Accurate 2495 | <<locked>> | 98% | 41,060 psi | 86% | 2867 fps | 99.4% |
| Accurate 2520 | <<locked>> | 92% | 41,771 psi | 87% | 2871 fps | 96.4% |
| Accurate 4064ᴾ | <<locked>> | 100% | 40,437 psi | 84% | 2874 fps | 97.4% |
| Accurate LT-30 | <<locked>> | 82% | 40,654 psi | 85% | 2710 fps | 97.9% |
| Accurate LT-32 | <<locked>> | 82% | 41,031 psi | 86% | 2713 fps | 96% |
| ADI AR 2219 | <<locked>> | 84% | 41,350 psi | 86% | 2851 fps | 97.9% |
| Alliant AR-Comp | <<locked>> | 94% | 42,627 psi | 89% | 2923 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 86% | 41,292 psi | 86% | 2825 fps | 99.7% |
| Baschieri & Pellagri 106 | <<locked>> | 84% | 41,684 psi | 87% | 2743 fps | 98.4% |
| Hodgdon H322 | <<locked>> | 88% | 42,743 psi | 89% | 2881 fps | 98.2% |
| Hodgdon H335 | <<locked>> | 86% | 40,770 psi | 85% | 2835 fps | 96.8% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 32,474 psi | 68% | 1841 fps | 100% |
| IMR 3031 | <<locked>> | 96% | 42,989 psi | 90% | 2949 fps | 99% |
| IMR 4198 | <<locked>> | 86% | 42,772 psi | 89% | 2812 fps | 100% |
| Lovex D073.4 | <<locked>> | 82% | 41,858 psi | 87% | 2838 fps | 96.1% |
| Lovex D073.6 | <<locked>> | 96% | 42,743 psi | 89% | 2900 fps | 96.6% |
| Norma 200 | <<locked>> | 82% | 41,191 psi | 86% | 2802 fps | 99.9% |
| Norma 202 | <<locked>> | 94% | 41,553 psi | 87% | 2851 fps | 97.1% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 32,445 psi | 68% | 1883 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 88% | 42,366 psi | 89% | 2841 fps | 96.1% |
| Rottweil R 901 | <<locked>> | 92% | 43,105 psi | 90% | 2848 fps | 97.1% |
| Shooters World AR Plus | <<locked>> | 82% | 41,858 psi | 87% | 2838 fps | 96.1% |
| Shooters World Match Rifle | <<locked>> | 96% | 42,743 psi | 89% | 2900 fps | 96.6% |
| SNPE Vectan SP 10 | <<locked>> | 84% | 41,495 psi | 87% | 2841 fps | 96.9% |
| SNPE Vectan SP 3 | <<locked>> | 86% | 41,727 psi | 87% | 2825 fps | 98.7% |
| SNPE Vectan Tubal 3000 | <<locked>> | 92% | 41,698 psi | 87% | 2762 fps | 96.9% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 43,207 psi | 90% | 2802 fps | 98.3% |
| Somchem S335 | <<locked>> | 94% | 43,221 psi | 90% | 2812 fps | 98.2% |
| Vihtavuori N130 | <<locked>> | 88% | 41,887 psi | 88% | 2776 fps | 99.6% |
| Vihtavuori N133 | <<locked>> | 92% | 41,147 psi | 86% | 2769 fps | 99% |
| Vihtavuori N135 | <<locked>> | 98% | 41,814 psi | 87% | 2871 fps | 99.4% |
| Vihtavuori N140 | <<locked>> | 96% | 41,742 psi | 87% | 2828 fps | 97.4% |
| Vihtavuori N540 | <<locked>> | 98% | 42,873 psi | 90% | 2864 fps | 97.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 2015 | <<locked>> | 80% | 29,544 psi | 62% | 2530 fps | 96% |
| Accurate 2460 | <<locked>> | 84% | 36,405 psi | 76% | 2717 fps | 95.2% |
| Accurate 2495 | <<locked>> | 86% | 27,311 psi | 57% | 2539 fps | 95.6% |
| Accurate 2520 | <<locked>> | 90% | 39,059 psi | 82% | 2812 fps | 95.6% |
| Accurate 4064 | <<locked>> | 94% | 33,431 psi | 70% | 2713 fps | 95.1% |
| Accurate LT-30 | <<locked>> | 80% | 38,493 psi | 80% | 2661 fps | 97.4% |
| Accurate LT-32 | <<locked>> | 80% | 38,856 psi | 81% | 2667 fps | 95.4% |
| ADI AR 2219 | <<locked>> | 80% | 35,810 psi | 75% | 2726 fps | 96.4% |
| Alliant AR-Comp | 23 gr | 80% | 27,238 psi | 57% | 2543 fps | 97.7% |
| Alliant Reloder-10x | <<locked>> | 80% | 34,113 psi | 71% | 2667 fps | 98.6% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 36,898 psi | 77% | 2644 fps | 97.3% |
| Hodgdon H322 | <<locked>> | 80% | 32,793 psi | 69% | 2648 fps | 95.2% |
| Hodgdon H335 | <<locked>> | 82% | 35,476 psi | 74% | 2717 fps | 95.1% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,931 psi | 50% | 1647 fps | 100% |
| IMR 3031 | 24.7 gr | 86% | 31,546 psi | 66% | 2674 fps | 95.7% |
| IMR 4198 | <<locked>> | 80% | 35,752 psi | 75% | 2664 fps | 99.4% |
| Lovex D073.4 | <<locked>> | 80% | 39,160 psi | 82% | 2782 fps | 95.3% |
| Lovex D073.6 | <<locked>> | 94% | 39,900 psi | 83% | 2841 fps | 95.8% |
| Norma 200 | <<locked>> | 80% | 38,537 psi | 81% | 2746 fps | 99.7% |
| Norma 202 | 26.3 gr | 90% | 36,463 psi | 76% | 2743 fps | 95.6% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 24,033 psi | 50% | 1690 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 86% | 39,726 psi | 83% | 2785 fps | 95.3% |
| Rottweil R 901 | <<locked>> | 86% | 35,969 psi | 75% | 2690 fps | 95% |
| Shooters World AR Plus | <<locked>> | 80% | 39,160 psi | 82% | 2782 fps | 95.3% |
| Shooters World Match Rifle | <<locked>> | 94% | 39,900 psi | 83% | 2841 fps | 95.8% |
| SNPE Vectan SP 10 | <<locked>> | 80% | 36,506 psi | 76% | 2733 fps | 95.3% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 34,795 psi | 73% | 2674 fps | 97% |
| SNPE Vectan Tubal 3000 | <<locked>> | 88% | 36,927 psi | 77% | 2657 fps | 95.5% |
| SNPE Vectan Tubal 5000 | <<locked>> | 92% | 33,533 psi | 70% | 2595 fps | 95.6% |
| Somchem S335 | <<locked>> | 86% | 33,910 psi | 71% | 2612 fps | 95.6% |
| Vihtavuori N130 | <<locked>> | 80% | 32,909 psi | 69% | 2579 fps | 98% |
| Vihtavuori N133 | <<locked>> | 80% | 28,601 psi | 60% | 2474 fps | 95.4% |
| Vihtavuori N135 | <<locked>> | 84% | 26,919 psi | 56% | 2507 fps | 95% |
| Vihtavuori N140 | <<locked>> | 90% | 34,345 psi | 72% | 2667 fps | 95.2% |
| Vihtavuori N540 | <<locked>> | 94% | 37,724 psi | 79% | 2756 fps | 95.7% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 35 powders for 6 x 52 R Bretschneider loaded with the .243 | 75gr | Reichenberg Spezial Jagd. IMR 3031 delivers the highest muzzle velocity at 2,949 fps; across all powders the maximum-charge window runs from 1,841 fps to 2,949 fps. Accurate 4064 gives the best case fill at 100 %, and 35 of the 35 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (330 MPa), the top charges use 68–90 %, leaving at least 10 % headroom. The 75.0 gr projectile in 0.243" calls for a 1:12.5 twist; slower twists will usually not stabilise this weight. Accurate 4064, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. IMR 3031, Alliant AR-Comp, Norma 202 rank at the top here: for 6 x 52 R Bretschneider with the .243 | 75gr | Reichenberg Spezial Jagd they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.