Load data for 6 x 52 R Bretschneider + .243 | 68gr | Berger ND

6 x 52 R Bretschneider cartridge drawing
Berger logo

Load Specifications

Bullet Manufacturer:Berger
Bullet Weight:68 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.04"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:36.2 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:47,862 psi
Recommended Twist Rate:1:11.5

Load data in caliber 6 x 52 R Bretschneider with .243 | 68gr | Berger ND bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, IMR 3031 and Hodgdon H322.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>94%42,032 psi88%2940 fps98.5%
Accurate 2495ᴾ<<locked>>100%39,276 psi82%2953 fps98.4%
Accurate LT-30<<locked>>86%42,946 psi90%2867 fps97.4%
ADI AR 2207<<locked>>84%42,583 psi89%2943 fps100%
ADI AR 2219<<locked>>88%43,207 psi90%3005 fps97.3%
Alliant AR-Comp<<locked>>96%41,423 psi87%3022 fps99.9%
Alliant Reloder-10x<<locked>>90%42,598 psi89%2976 fps99.3%
Alliant Reloder-7<<locked>>82%41,336 psi86%2887 fps99.4%
Baschieri & Pellagri 106<<locked>>86%41,394 psi86%2848 fps97.4%
Hodgdon H322<<locked>>90%41,800 psi87%2976 fps96.9%
Hodgdon H335<<locked>>90%42,873 psi90%2992 fps96.1%
Hodgdon H4198<<locked>>82%42,018 psi88%2867 fps96.5%
Hodgdon TrailBossᴾ<<locked>>100%31,662 psi66%1916 fps100%
IMR 3031<<locked>>98%41,800 psi87%3041 fps97.8%
IMR 4198<<locked>>88%42,148 psi88%2923 fps99.7%
Norma 200<<locked>>86%42,772 psi89%2959 fps99.7%
Norma 202<<locked>>98%42,670 psi89%2992 fps96.2%
ReloadSwiss RS 14ᴾ<<locked>>100%31,531 psi66%1962 fps100%
SNPE Vectan BA6 1/2<<locked>>82%42,540 psi89%2690 fps100%
SNPE Vectan SP 3<<locked>>88%40,756 psi85%2927 fps97.5%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%39,668 psi83%2841 fps96.3%
Somchem S335<<locked>>96%42,235 psi88%2907 fps96.9%
Vihtavuori N120<<locked>>84%42,714 psi89%2897 fps100%
Vihtavuori N130<<locked>>90%41,089 psi86%2877 fps98.9%
Vihtavuori N133<<locked>>96%42,989 psi90%2923 fps98.6%
Vihtavuori N135ᴾ<<locked>>100%40,408 psi84%2963 fps98.4%
Vihtavuori N140<<locked>>98%40,654 psi85%2917 fps95.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>84%30,632 psi64%2671 fps95.2%
Accurate 2495<<locked>>92%29,457 psi62%2713 fps95.2%
Accurate LT-30<<locked>>80%35,650 psi74%2707 fps95.3%
ADI AR 2207<<locked>>80%37,521 psi78%2841 fps100%
ADI AR 2219<<locked>>84%37,840 psi79%2887 fps95.7%
Alliant AR-Comp23.4 gr82%26,542 psi55%2621 fps95.9%
Alliant Reloder-10x<<locked>>80%31,372 psi66%2713 fps96.7%
Alliant Reloder-7<<locked>>80%38,725 psi81%2831 fps99%
Baschieri & Pellagri 106<<locked>>80%34,069 psi71%2684 fps95.1%
Hodgdon H32225.3 gr86%36,593 psi76%2854 fps95.3%
Hodgdon H335<<locked>>88%39,755 psi83%2927 fps95.2%
Hodgdon H4198<<locked>>80%39,349 psi82%2808 fps95.7%
Hodgdon TrailBoss<<locked>>80%23,612 psi49%1726 fps100%
IMR 303126.2 gr92%34,592 psi72%2864 fps95.5%
IMR 4198<<locked>>80%33,315 psi70%2720 fps98.2%
Norma 200<<locked>>80%35,476 psi74%2802 fps98.6%
Norma 202<<locked>>96%40,393 psi84%2943 fps95.5%
ReloadSwiss RS 14<<locked>>80%23,235 psi49%1759 fps100%
SNPE Vectan BA6 1/2<<locked>>80%40,669 psi85%2657 fps100%
SNPE Vectan SP 3<<locked>>82%34,040 psi71%2766 fps95.4%
SNPE Vectan Tubal 5000<<locked>>98%37,130 psi78%2785 fps95.5%
Somchem S335<<locked>>92%37,115 psi78%2795 fps95.4%
Vihtavuori N120<<locked>>80%37,681 psi79%2802 fps100%
Vihtavuori N130<<locked>>80%30,124 psi63%2615 fps95.9%
Vihtavuori N133<<locked>>86%31,589 psi66%2661 fps95.3%
Vihtavuori N135<<locked>>92%31,546 psi66%2749 fps95.7%
Vihtavuori N140<<locked>>96%38,087 psi80%2861 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 6 x 52 R Bretschneider loaded with the .243 | 68gr | Berger ND. IMR 3031 delivers the highest muzzle velocity at 3,041 fps; across all powders the maximum-charge window runs from 1,916 fps to 3,041 fps. Accurate 2495 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (330 MPa), the top charges use 66–90 %, leaving at least 10 % headroom. The 68.0 gr projectile in 0.243" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, IMR 3031, Hodgdon H322 rank at the top here: for 6 x 52 R Bretschneider with the .243 | 68gr | Berger ND they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data