Load data for 6 x 52 R Bretschneider + .243 | 68gr | Berger M

6 x 52 R Bretschneider cartridge drawing
Berger logo

Load Specifications

Bullet Manufacturer:Berger
Bullet Weight:68 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.04"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:36.2 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:23.62"
Max. allowed Pressure:47,862 psi
Recommended Twist Rate:1:11.5

Load data in caliber 6 x 52 R Bretschneider with .243 | 68gr | Berger M bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, IMR 3031 and Hodgdon H322.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>94%42,337 psi88%2946 fps98.6%
Accurate 2495ᴾ<<locked>>100%39,117 psi82%2953 fps98.3%
Accurate LT-30<<locked>>86%43,236 psi90%2874 fps97.5%
ADI AR 2207<<locked>>84%42,409 psi89%2940 fps100%
ADI AR 2219<<locked>>86%40,248 psi84%2943 fps96.5%
Alliant AR-Comp<<locked>>96%41,742 psi87%3028 fps99.9%
Alliant Reloder-10x<<locked>>90%42,888 psi90%2982 fps99.4%
Alliant Reloder-7<<locked>>82%41,205 psi86%2884 fps99.4%
Baschieri & Pellagri 106<<locked>>86%41,655 psi87%2854 fps97.4%
Hodgdon H322<<locked>>90%42,076 psi88%2982 fps97%
Hodgdon H335<<locked>>90%42,743 psi89%2992 fps96.1%
Hodgdon H4198<<locked>>82%41,872 psi87%2864 fps96.5%
Hodgdon TrailBossᴾ<<locked>>100%32,053 psi67%1926 fps100%
IMR 3031<<locked>>98%42,061 psi88%3048 fps97.9%
IMR 4198<<locked>>88%42,003 psi88%2920 fps99.7%
Norma 200<<locked>>86%43,120 psi90%2966 fps99.7%
Norma 202<<locked>>98%42,931 psi90%2999 fps96.2%
ReloadSwiss RS 14ᴾ<<locked>>100%31,908 psi67%1972 fps100%
SNPE Vectan BA6 1/2<<locked>>82%42,902 psi90%2697 fps100%
SNPE Vectan SP 3<<locked>>88%41,060 psi86%2933 fps97.6%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%39,914 psi83%2848 fps96.4%
Somchem S335<<locked>>96%42,496 psi89%2913 fps97%
Vihtavuori N120<<locked>>84%42,554 psi89%2897 fps100%
Vihtavuori N130<<locked>>90%41,379 psi86%2887 fps99%
Vihtavuori N133<<locked>>96%42,830 psi89%2920 fps98.5%
Vihtavuori N135ᴾ<<locked>>100%40,770 psi85%2972 fps98.5%
Vihtavuori N140ᴾ<<locked>>100%43,207 psi90%2972 fps96.6%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 23.62"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>84%30,545 psi64%2671 fps95.1%
Accurate 2495<<locked>>92%29,689 psi62%2720 fps95.4%
Accurate LT-30<<locked>>80%35,926 psi75%2713 fps95.4%
ADI AR 2207<<locked>>80%37,405 psi78%2838 fps100%
ADI AR 2219<<locked>>84%37,681 psi79%2884 fps95.7%
Alliant AR-Comp23.4 gr82%26,440 psi55%2618 fps95.8%
Alliant Reloder-10x<<locked>>80%31,270 psi65%2710 fps96.7%
Alliant Reloder-7<<locked>>80%38,972 psi81%2838 fps99.1%
Baschieri & Pellagri 106<<locked>>80%33,939 psi71%2680 fps95.1%
Hodgdon H32225.4 gr86%36,854 psi77%2864 fps95.4%
Hodgdon H335<<locked>>88%40,001 psi84%2933 fps95.3%
Hodgdon H4198<<locked>>80%39,639 psi83%2815 fps95.9%
Hodgdon TrailBoss<<locked>>80%23,540 psi49%1722 fps100%
IMR 303126.3 gr92%34,838 psi73%2874 fps95.6%
IMR 4198<<locked>>80%33,257 psi69%2720 fps98.2%
Norma 200<<locked>>80%35,360 psi74%2799 fps98.6%
Norma 202<<locked>>96%40,190 psi84%2940 fps95.4%
ReloadSwiss RS 14<<locked>>80%23,177 psi48%1759 fps100%
SNPE Vectan BA6 1/2<<locked>>80%40,538 psi85%2657 fps100%
SNPE Vectan SP 3<<locked>>82%33,895 psi71%2762 fps95.4%
SNPE Vectan Tubal 5000<<locked>>98%37,362 psi78%2792 fps95.6%
Somchem S335<<locked>>92%37,376 psi78%2802 fps95.5%
Vihtavuori N120<<locked>>80%37,550 psi78%2799 fps100%
Vihtavuori N130<<locked>>80%30,342 psi63%2625 fps96%
Vihtavuori N133<<locked>>86%31,459 psi66%2661 fps95.3%
Vihtavuori N135<<locked>>92%31,430 psi66%2746 fps95.7%
Vihtavuori N140<<locked>>96%38,392 psi80%2867 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for 6 x 52 R Bretschneider loaded with the .243 | 68gr | Berger M. IMR 3031 delivers the highest muzzle velocity at 3,048 fps; across all powders the maximum-charge window runs from 1,926 fps to 3,048 fps. Accurate 2495 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (330 MPa), the top charges use 67–90 %, leaving at least 10 % headroom. The 68.0 gr projectile in 0.243" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, IMR 3031, Hodgdon H322 rank at the top here: for 6 x 52 R Bretschneider with the .243 | 68gr | Berger M they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data